考虑火场环境实时作用下的人群疏散仿真研究

在现行的性能化防火设计中,通常将火灾发展与人员疏散两个过程分开考虑,从而忽略了火场环境对人员疏散过程的实时作用。该方法与实际情况有很大差异。笔者借助火灾模拟程序CFAST和人员疏散仿真软件buildingEXODUS,以某地铁车站为例,进行了火场环境实时作用下的人群疏散仿真研究。结果表明,火场环境会降低人群的判断和活动能力,延长疏散时间并产生其他的不利后果。因此,在防火设计中考虑火场环境对人群疏散的实时影响是十分必要的。     

A Proactive Approach Can Make Site Remediation Less Expensive

Without any incentive to clean up a contaminated site, remediation is often delayed until the site owner is compelled to act by regulatory agencies. In such a context, the selected technology is typically the one that will reach the remediation goals as quickly as possible. Unfortunately, this criterion is often met by overly expensive technologies, resulting in high and sometimes unaffordable total remediation costs, leading to a remediation with a negative net benefit. This study examines the effects of time constraint and benefit value on the optimal remediation strategy for a diesel-contaminated site. This strategy is developed using the technico-economic model METEORS, which takes into account the technology’s effectiveness, the uncertainty of the level of contamination, and the possibility of reducing this uncertainty through either an additional characterization (before selecting and applying a technology) or the monitoring of the remediation technology (during its use). Results of simulations with both economic and temporal constraints support a proactive approach to site remediation.     

Determination of toxic elements in waters and sediments from River Subin in the Ashanti Region of Ghana

Waters and sediments of Subin River, which flows through the industrial and commercial areas of Kumasi in the Ashanti region of Ghana, were geochemically investigated to ascertain heavy metal pollution levels due to anthropogenic activities. The study shows preoccupying pollution levels that constitute a threat to public and ecological systems. The waters of Subin River are neutral to slightly basic, inferred from pH values of 6.89–7.65). Electric conductivity (EC) of the waters ranges from 822 to 1,821 μs/cm and the range of total dissolved solids (TDS) is from 409 to 913 mg/l. Toxic elements contents of sediments and waters from 10 sites along the river were analysed by instrumental neutron activation analysis (INAA), and Al, As, Cd, Cr, Cu and Zn were determined. The concentrations of Al, As, Cd, Cr, Cu and Zn in the waters range between 4.02–15.18, 0.007–0.16, 0.002–0.05, 0.001–0.019, 1.32–7.04 and 4.28–10.2 mg/l, respectively. The contamination factors (CF) computed for the elements indicate that with the exception of sampling site S10, the sediments are polluted with Cd. Chromium contamination in the sediments is observed at S6 and S7, where the CF values were 1.39 and 1.52, respectively. The pollution load indices (PLI) were low (<1) and ranged from 0.14 to 0.75, suggesting that the overall sediment column of the river is not polluted.     

Recycling of EDTA solution after soil washing of Pb, Zn, Cd and As contaminated soil

Soil washing with EDTA is known to be an effective means of removing toxic metals from contaminated soil. A practical way of recycling of used soil washing solution remains, however, an unsolved technical problem. We demonstrate here, in a laboratory scale experiment, the feasibility of using acid precipitation to recover up to 50% of EDTA from used soil washing solution obtained after extraction of Pb (5330 mg kg⁻¹), Zn (3400 mg kg⁻¹), Cd (35 mg kg⁻¹) and As (279 mg kg⁻¹) contaminated soil. Up to 100% of EDTA residual in the washing solution and 100%, 97%, 98% and 100% of initial Pb, Zn, Cd and As concentration in the solution, respectively, were removed in an electrolytic cell using a graphite anode. We employed the recovered EDTA and treated washing solution to prepare recycled soil washing solution with the same potential for extracting toxic metals from soil as the original. The efficiency of soil washing depends on the EDTA concentration. Using twice recycled 30 mmol EDTA kg⁻¹ soil, we removed 44%, 20%, 53% and 61% of Pb, Zn, Cd and As, respectively, from contaminated soil.     

提高节理面c和φ对岩坡开挖变形的影响

为了反映岩质边坡在节理面注浆后的变形效应,首先,通过室内试验,分析注浆前后岩体变形和破坏的全过程,以探讨其抗剪性能(粘结力c和内摩擦角φ)的变化;然后,基于理想弹塑性本构模型的Mohr-Cou-lomb准则,运用拉格朗日元数值方法(FLAC3D),对岩坡注浆前后变形效应(水平位移、垂直位移、剪应变增量)进行模拟。结果表明:注浆加固后,岩体的位移场变得均匀和连续,节理面处的较大位移受到抑制,边坡的整体性得到提高,有利于边坡的稳定性。     

Morphologie effects of channelization: the case of the Neebing-McIntyre floodway,Thunder Bay,Ontario, Canada

The Neebing-McIntyre floodway in Thunder Bay, Ontario, Canada, has been constructed with a relatively straight and uniform trapezoidal channel, compared with the prechannelized sinuous reaches of the Neebing and the McIntyre rivers. The flow regime of the floodway also contrasts significantly with the prechannelized regime, because of the combination of discharges from these rivers into a new channel and the regulation of flows by a diversion structure. The maximum channel capacity of the floodway is about 284 m³ s^–1 (175-year regional flood), compared with about 40 m³ s^–1 and 60 m³ s^–1, respectively, for the Neebing and the McIntyre. According to regime theories, the construction of a straight and trapezoidal channel has upset the equilibrium of the stream system and therefore should lead to some accelerated erosion and sedimentation processes in the new channel immediately after construction. Erosion potential is particularly high during higher discharge events, when flow velocities are expected to be greater than the prechannelized velocities of the Neebing and the McIntyre. The overall sediment yield of the watershed is low (71t km^–2 yr^–1), compared with other documented watersheds of North America, but the rates of deposition in the floodway are relatively high, mainly due to the backwater effect of Lake Superior. Unless maintained by constant channel work, the floodway will tend to fill up with sediment, until a postconstructional equilibrium is reestablished.     

Recent application of Computational Fluid Dynamics (CFD) in process safety and loss prevention: A review

In recent years, significant progress has been made to ensure that process industries are among the safest workplaces in the world. However, with the increasing complexity of existing technologies and new problems brought about by emerging technologies, a strong need still exists to study the fundamentals of process safety and predict possible scenarios. This is attained by conducting the corresponding consequence modeling and risk assessments. As a result of the continuous advancement of Computational Fluid Dynamics (CFD) tools and exponentially increased computation capabilities along with better understandings of the underlying physics, CFD simulations have been applied widely in the areas of process safety and loss prevention to gain new insights, improve existing models, and assess new hazardous scenarios. In this review, 126 papers from 2010 to 2020 have been included in order to systematically categorize and summarize recent applications of CFD for fires, explosions, dispersions of flammable and toxic materials from accidental releases, incident investigations and reconstructions, and other areas of process safety. The advantages of CFD modeling are discussed and the future of CFD applications in this research area is outlined.     

Optimizing the design of storage facilities through the application of ISD and QRA

Four strategies can be used to achieve safety in chemical processes: inherent, passive, active and procedural. However, the strategy that offers the best results is the inherent safety approach, especially if it is applied during the initial stages of a project. Inherently Safer Design (ISD) permanently eliminates or reduces hazards, and thus avoids or diminishes the consequences of incidents. ISD can be applied using four strategies: substitution, minimization, moderation and simplification. In this paper, we propose a methodology that combines ISD strategies with Quantitative Risk Assessment (QRA) to optimize the design of storage installations. As 17% of major accidents in the chemical industry occur during the storage process and cause significant losses, it is essential to improve safety in such installations. The proposed method applies QRA to estimate the risk associated with a specific design. The design can then be compared to others to determine which is inherently safer. The risk analysis may incorporate complex phenomena such as the domino effect and possible impacts on vulnerable material and human elements. The methodology was applied to the San Juanico tragedy that occurred in Mexico in 1984.     

Sorption of tylosin on clay minerals

The equilibrium sorption of tylosin (TYL) on kaolinite and montmorillonite was measured at different solution pH using batch reactor systems. The results showed that all the sorption isotherms were nonlinear and that the nonlinearity decreased as the solution pH increased for a given clay. At a specific aqueous concentration, the single-point sorption distribution coefficient (K_D) of TYL decreased rapidly as the solution pH increased. A speciation-dependent sorption model that accounted for the contributions of the cationic and neutral forms of TYL fit the data well, suggesting that the sorption may be dominated by both ion exchange and hydrophobic interactions. The isotherm data also fit well to a dual mode model that quantifies the contributions of a site-limiting Langmuir component (ion exchange) and a non-specific linear partitioning component (hydrophobic interactions). X-ray diffraction analyses revealed that the interlayers of montmorillonite were expanded due to the uptake of TYL. TYL molecules likely form a monolayer surface coverage.     

The gloomy greenhouse: Should the world phase out fossil fuels?

In 1988 the Toronto World Conference on the Changing Atmosphere called for a reduction of CO₂ emissions of the industrialized countries by approximately 20% by the year 2005 as compared with 1988. A stabilization of CO₂ concentrations would require an eventual emissions reduction of more than 50% of present levels. Model runs were performed with the Dutch Integrated Model for the Assessment of the Greenhouse Effect (IMAGE) to put these figures into perspective. It was found that the suggested emissions reduction levels could indeed be adequate to prevent global temperature change from moving beyond past climate experience. However, this would only be the case when these reduced levels of emissions were achieved at a global scale and maximum emission control for the other greenhouse gases was implemented. A delayed response analysis shows that the policies of the coming decades are crucial for the eventual control of the greenhouse effect.