Mass balance approach to estimating radionuclide loads and concentrations in edible fish tissues using stable analogues

Humans can consume a number of types of biota tissues, which have varying propensities to accumulate radionuclides. As a result, depending upon the biota species, the radionuclide and the tissue under consideration, it may be necessary to estimate the percent radionuclide load in specific edible tissues, and in cases where whole organisms are consumed, to estimate the radionuclide load in the whole body of an organism, based on data that have been collected for individual tissues. To accomplish this, data were compiled that can be used to estimate the partitioning patterns and percent loads of various groups of elements in edible tissues of freshwater fishes. General trends in partitioning, such as those provided in this paper, can be used to predict radionuclide transfer to humans and the corresponding potential radiological dose to humans via dietary pathways, in this case following the consumption of fish.     

Runoff of pesticides from rice fields in the Ile de Camargue (Rhône river delta, France): field study and modeling

A field study on the runoff of pesticides was conducted during the cultivation period in 2004 on a hydraulically isolated rice farm of 120 ha surface with one central water outlet. Four pesticides were studied: Alphamethrin, MCPA, Oxadiazon, and Pretilachlor. Alphamethrin concentrations in runoff never exceeded 0.001 microg L(-1). The three other pesticides were found in concentrations between 5.2 and 28.2 microg L(-1) in the runoff water shortly after the application and decreased thereafter. The data for MCPA compared reasonably well with predictions by an analytical runoff model, accounting for volatilization, degradation, leaching to groundwater, and sorption to soil. The runoff model estimated that runoff accounted for as much as 18-42% of mass loss for MCPA. Less runoff is observed and predicted for Oxadiazon and Pretilachlor. It was concluded that runoff from rice paddies carries important loads of dissolved pesticides to the wetlands in the Ile de Camargue, and that the model can be used to predict this runoff.     

Development of a risk-based index for source water protection planning, which supports the reduction of pathogens from agricultural activity entering water resources

Source water protection planning (SWPP) is an approach to prevent contamination of ground and surface water in watersheds where these resources may be abstracted for drinking or used for recreation. For SWPP the hazards within a watershed that could contribute to water contamination are identified together with the pathways that link them to the water resource. In rural areas, farms are significant potential sources of pathogens. A risk-based index can be used to support the assessment of the potential for contamination following guidelines on safety and operational efficacy of processes and practices developed as beneficial approaches to agricultural land management. Evaluation of the health risk for a target population requires knowledge of the strength of the hazard with respect to the pathogen load (massxconcentration). Manure handling and on-site wastewater treatment systems form the most important hazards, and both can comprise confined and unconfined source elements. There is also a need to understand the modification of pathogen numbers (attenuation) together with characteristics of the established pathways (surface or subsurface), which allow the movement of the contaminant species from a source to a receptor (water source). Many practices for manure management have not been fully evaluated for their impact on pathogen survival and transport in the environment. A key component is the identification of potential pathways of contaminant transport. This requires the development of a suitable digital elevation model of the watershed for surface movement and information on local groundwater aquifer systems for subsurface flows. Both require detailed soils and geological information. The pathways to surface and groundwater resources can then be identified. Details of land management, farm management practices (including animal and manure management) and agronomic practices have to be obtained, possibly from questionnaires completed by each producer within the watershed. To confirm that potential pathways are active requires some microbial source tracking. One possibility is to identify the molecular types of Escherichia coli present in each hazard on a farm. An essential part of any such index is the identification of mitigation strategies and practices that can reduce the magnitude of the hazard or block open pathways.     

常州市臭氧污染传输路径和潜在源区

利用NCEP全球再分析资料和HYSPLIT4模式,计算了2013—2015年常州市臭氧(O_3)超标日的气流后向轨迹。结合聚类分析方法和常州市PM2.5、PM10、SO2、NO2、O_3数据,分析了O_3超标日不同类型气团来源对各污染物浓度的影响,并利用引入权重因子后的潜在污染源贡献函数分析了影响常州市O_3超标的潜在污染源区分布特征。结果表明:常州市O_3超标期间易受到东南和西南方向气流影响,其中从东海和黄海途经浙江东北部、上海、江苏南部等地的东南气流占比达50%以上。自内陆途经黄山-湖州-宜兴到常州的气流对应的O_3平均质量浓度最高,为116μg/m3。自山东经枣庄-宿迁-淮安-泰州-苏州-无锡到常州的气流对应的O_3平均质量浓度最低,为78μg/m3,但该气流对应的SO2和NO2平均值为各聚类中的最高。影响常州市O_3的潜在污染源区主要在常州周边200 km以内的区域,且集中在从南京至上海的长江下游沿线区域和杭州湾区域;其中太湖湖区为重点污染源源区之一。O_3超标日影响常州NO2的潜在污染源区主要集中在江苏南部、浙江东北部和上海3个区域,太湖周边的常州、无锡、苏州和湖州等几个临近城市为潜在的重点污染源区。与影响常州O_3的WPSCF高值区相比,影响NO2的高值区分布范围更大、距离更远。影响常州O_3的潜在污染源区分布,与长江三角洲地区人为源大气污染物的高排放区域较为一致,说明长江三角洲地区的O_3污染与本区域的人为源大气污染物排放有着极为密切的关联。     

A method for evaluating transport energy consumption in suburban areas

Urban sprawl is a major issue for sustainable development. It represents a significant contribution to energy consumption of a territory especially due to transportation requirements. However, transport energy consumption is rarely taken into account when the sustainability of suburban structures is studied. In this context, the paper presents a method to estimate transport energy consumption in residential suburban areas. The study aimed, on this basis, at highlighting the most efficient strategies needed to promote awareness and to give practical hints on how to reduce transport energy consumption linked to urban sprawl in existing and future suburban neighborhoods. The method uses data collected by using empirical surveys and GIS. An application of this method is presented concerning the comparison of four suburban districts located in Belgium to demonstrate the advantages of the approach. The influence of several parameters, such as distance to work places and services, use of public transport and performance of the vehicles, are then discussed to allow a range of different development situations to be explored. The results of the case studies highlight that traveled distances, and thus a good mix between activities at the living area scale, are of primordial importance for the energy performance, whereas means of transport used is only of little impact. Improving the performance of the vehicles and favoring home-work give also significant energy savings. The method can be used when planning new areas or retrofitting existing ones, as well as promoting more sustainable lifestyles regarding transport habits.     

Microbial degradation of the benzonitrile herbicides dichlobenil, bromoxynil and ioxynil in soil and subsurface environments--insights into degradation pathways, persistent metabolites and involved degrader organisms

The benzonitriles dichlobenil, bromoxynil and ioxynil are important broad-spectrum or selective herbicides used in agriculture, orchards and public areas worldwide. The dichlobenil metabolite 2,6-dichlorobenzamide is the most frequently encountered groundwater contaminant in Denmark, which suggests that the environmental fate of these three structurally related benzonitrile herbicides should be addressed in detail. This review summarises the current knowledge on microbial degradation of dichlobenil, bromoxynil and ioxynil with particular focus on common features of degradation rates and pathways, accumulation of persistent metabolites and diversity of the involved degrader organisms.     

Influence of organic amendments on diuron leaching through an acidic and a calcareous vineyard soil using undisturbed lysimeters

The influence of different organic amendments on diuron leaching was studied through undisturbed vineyard soil columns. Two composts (A and D), the second at two stages of maturity, and two soils (VR and Bj) were sampled. After 1 year, the amount of residues (diuron + metabolites) in the leachates of the VR soil (0.19-0.71%) was lower than in the Bj soil (4.27-8.23%), which could be explained by stronger diuron adsorption on VR. An increase in the amount of diuron leached through the amended soil columns, compared to the blank, was observed for the Bj soil only. This result may be explained by the formation of mobile complexes between diuron and water-extractable organic matter (WEOM) through the Bj soil, or by competition between diuron and WEOM for the adsorption sites in the soil. For both soils, the nature of the composts and their degree of maturity did not significantly influence diuron leaching.     

沈阳地区冬季空气颗粒物输送路径及潜在源分析

文章利用2016～2017年冬季沈阳地区气象数据和环境空气污染物浓度数据,综合分析沈阳地区冬季环境空气污染特征,分析颗粒物输送路径以及潜在源区贡献情况.结果表明,沈阳地区冬季污染时段内PM2.5是主要污染物,PM2.5平均浓度达到149μg/m3,最大值达到273 μg/m3.沈阳地区环境空气颗粒物除来源于本地排放外,...     

Axi-symmetric simulation of soil vapor extraction influenced by soil fracturing

Fracturing, either pneumatic or hydraulic, is a method to improve the performance of soil vapor extraction (SVE) in relatively low permeability soils (< 10(-5) cm/s). A two-dimensional model is presented to simulate trichloroethylene (TCE) soil vapor extraction modified by fracturing. Flow and transport is modeled using mobile macropore and micropore networks, which also have been identified in the literature as dual porosity, dual permeability, or heterogeneous flow models. In this model, fluids can flow in both the macropore and micropore networks. This represents a more general model compared to immobile micropore, mobile macropore models presented thus far in the literature for vapor flow and transport in two dimensions. The model considers pressure- and concentration-driven exchange between the macropore and micropore networks, concentration-driven exchange between the gas and sorbed phases within each network, and equilibrium exchange between the gas and water and a sorbed phase within each network. The parameters employed in an example simulation are based on field measurements made at a fractured site. Considered in the simulations were the influence of the volume percentage of fractures, the length of fractures, the relative location of the water table, and the influence of pulsed pumping. For these simulations, internetwork concentration-driven exchange most significantly affected mass removal. The volume percentage of fractures more significantly influence flow and mass removal than the length of fractures. The depth of the water table below the contamination plume only significantly influenced flow and mass removal when the water table was within 60 cm of the bottom of the contaminated soil in the vadose zone for the parameters considered in this study. Pulsed pumping was not found to increase the amount of mass removed in this study.     

Characterisation of HTO diffusion properties by an in situ tracer experiment in Opalinus clay at Mont Terri

A long-term single borehole diffusion experiment using tritiated water as tracer was carried out in Opalinus clay, an argillaceous rock formation that is accessible at the Mont Terri Underground Research Laboratory, situated in the Swiss Jura. The tracer was diluted in reconstituted formation water and introduced into a packed-off section of a borehole located in saturated rock. Pressure in this interval was maintained equal to the pore pressure of the surrounding rock in order to prevent any hydraulic gradient around the borehole and to avoid advective transport processes. The evolution of the tracer concentration in the injection system was monitored over time. After 1 year of diffusion, the claystone surrounding the interval was retrieved by overcoring the whole borehole and packer system, and by an adjacent oblique borehole. Compressed air was used as drilling fluid to reduce rock disturbances. The recovered overcore was sampled along profiles perpendicular to the borehole wall with a view to determining the tracer-concentration profiles in the rock. To avoid further evaporation of tritiated water, subsamples were immediately transferred into polyethylene bottles and disaggregated by adding a known amount of tracer-free water. Fifteen profiles were determined and showed a decreasing tracer concentration with distance into the rock. The pore-water contents were constant along those profiles, confirming that only very little water was lost during overcoring operations. The evolution of tritium-tracer concentration in the injection system over time and in situ profiles were interpreted with a 3-D numerical simulation of the experiment. That allowed for the identification of the transport parameters (orthotropic diffusion tensor and porosity) by minimising the relative quadratic error between the experimental and simulated data. The fitting is good and the results are consistent with data obtained on drill-core samples. The result of tritiated water is discussed regarding (1) the potential effect of mechanical and/or chemical disturbances around the injection borehole and (2) the specific behaviour of tritiated water.