Evidence of the impacts of the national housing programme on the accessibility of the low‐income population in Rio de Janeiro

The Brazilian shift from a primarily rural to a more urban society has created major challenges that public policies must address. One of the most relevant challenges is deep social exclusion in urban areas, especially in terms of adequate housing and access to urban opportunities (e.g., jobs, housing, and services). In this context, land use and transport planning play a critical role in the sustainable development agenda. The work presented here analyses the accessibility of low‐income dwellings licenced under the Brazilian housing programme to the low‐income population. To evaluate the accessibility of the programme's target population, a case study was conducted in the city of Rio de Janeiro, where 58,000 homes licensed under the programme were analysed using GIS tools in terms of the present public transport network and the location of the homes. The amount of time it takes to access public transport on foot and the homes’ locations in relation to major urban opportunities were also analysed. Finally, the same analysis was performed for the future transport network, and the results of the two analyses were compared to identify the scope of the legacy generated by investments in preparation for the 2016 network.     

Energy efficiency and conservation for individual Americans

Americans make up only 4% of the world population, yet currently consume 25% of the world’s fossil fuels. The U.S. imports 63% of its oil and it is predicted that by 2020 the U.S. will be importing 95% of its oil resources. Over the past century, ample and affordable supplies of fossil fuels have powered the growth and prosperity of the economies of the US and other countries. Within this century, world oil supplies will decline while demand is projected to continue to increase, suggesting that we will have to transition to different fuels or become much more energy efficient or both. Looking ahead to the near decades, estimates are that consumers will have to reduce their energy use by at least 50%. This reduction will be necessary in large part due the decline in the availability of conventional oil and gas, but also because the U.S. population will continue to grow in number. Although government action is important, individuals too often discount their ability to make significant contributions to solving such major problems. This investigation identifies how informed and concerned individuals can collectively conserve fossil energy. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue. An erratum to this article can be found at     

沈阳地区一次颗粒物重污染天气过程的气象成因分析

为探究沈阳地区重污染天气成因,文章利用地面、高空气象观测资料、风廓线雷达资料、NECP再分析资料以及大气污染物监测资料,对2019年3月1～6日沈阳地区出现的一次持续性重污染天气过程,探讨了大气污染物质量浓度、地面气象要素变化特征、大气环流配置与外来输送等特征.结果表明,均压场、地面风场弱及辐合、高温高湿是本次重污染天...     

膜生物反应器中污染物去除途径及膜过滤性能

采用一体式悬浮生长型和附着生长型膜生物反应器(MBR)处理微污染水源水,主要考察了两种MBR对污染物的去除途径和膜过滤性能。结果表明,两种MBR对主要污染物高锰酸盐指数和NH4+-N均有良好的去处效果,去除率分别达到66%和94%以上。悬浮生长型MBR的去除效果稍强于附着MBR,因为前者的生物量要高于后者。两种MBR的生物去除和膜去除对去除效果都有重要贡献,而膜去除是获得良好的出水水质的保证。曝气量对两种MBR的污染物去除效果没有明显影响,一定范围内增大曝气量会提高生物去除的比例。悬浮生长型MBR的膜污染速率要比附着生长型快得多,但运行稳定后,两者的膜比通量大致相当。     

Colloid transport in a geochemically heterogeneous porous medium: aquifer tank experiment and modeling

To examine colloid transport in geochemically heterogeneous porous media at a scale comparable to field experiments, we monitored the migration of silica-coated zirconia colloids in a two-dimensional layered porous media containing sand coated to three different extents by ferric oxyhydroxides. Transport of the colloids was measured over 1.65 m and 95 days. Colloid transport was modeled by an advection-dispersion-deposition equation incorporating geochemical heterogeneity and colloid deposition dynamics (blocking). Geochemical heterogeneity was represented as favorable (ferric oxyhydroxide-coated) and unfavorable (uncoated sand) deposition surface areas. Blocking was modeled as random sequential adsorption (RSA). Release of deposited colloids was negligible. The time to colloid breakthrough after the onset of blocking increased with increasing ferric oxyhydroxide-coated surface area. As the ferric oxyhydroxide surface area increased, the concentration of colloids in the breakthrough decreased. Model-fits to the experimental data were made by inverse solutions to determine the fraction of surface area favorable for deposition and the deposition rate coefficients for the favorable (ferric oxyhydroxide-coated) and unfavorable sites. The favorable deposition rate coefficient was also calculated by colloid filtration theory. The model described the time to colloid breakthrough and the blocking effect reasonably well and estimated the favorable surface area fraction very well for the two layers with more than 1% ferric oxyhydroxide coating. If mica edges in the uncoated sand were considered as favorable surface area in addition to the ferric oxyhydroxide coatings, the model predicted the favorable surface area fraction accurately for the layer with less than 1% ferric oxyhydroxide coating.     

Cosolvent effects on sorption isotherm linearity

Sorption-desorption hysteresis, slow desorption kinetics, and other nonideal phenomena have been attributed to the differing sorptive characteristics of the natural organic polymers associated with soils and sediments. In this study, aqueous and mixed solvent systems were used to investigate the effects of a cosolvent, methanol, on sorption isotherm linearity with natural organic matter (NOM), and to evaluate whether these results support, or weaken, the rubbery/glassy polymer conceptualization of NOM. All of the sorption isotherms displayed some nonlinear character. Our data indicates that all of the phenanthrene and atrazine isotherms were nonlinear up to the highest equilibrium solution concentration to solute solubility in water or cosolvent ratios (Ce/Sw,c) used, approximately 0.018 and 0.070, respectively. Isotherm linearity was also observed to increase with volumetric methanol content (fc). This observation is consistent with the NOM rubbery/glassy polymer conceptualization: the presence of methanol in NOM increased isotherm linearity as do solvents in synthetic polymers, and suggests that methanol is interacting with the NOM, enhancing its homogeneity as a sorptive phase so that sorption is less bimodal as fc increases. When the equilibrium solution concentration was normalized for solute solubility in water or methanol-water solutions, greater relative sorption magnitude was observed for the methanol-water treatments. This observation, in conjunction with the faster sorption kinetics observed in the methanol-water sediment column systems, indicates that the increase in relative sorption magnitude with fc may be attributed to the faster sorption kinetics in the methanol-water systems, and hence, greater relative sorptive uptake for the rubbery polymer fraction of NOM at similar time scales.     

The dispersion of the Buncefield oil fire plume: An extreme accident without air quality consequences

The dispersion of pollutants from the huge Buncefield oil depot fire that occurred on 11 December 2005 is simulated using a regional Eulerian chemistry-transport model. We analyse the transport and mixing of the fire plume. We show that the hot plume never reached the ground. Instead, it pierced the thin wintertime boundary layer and was injected into the free troposphere at higher altitudes. This is in agreement with data from many air quality stations. This high injection was fortunate because the fine aerosol particles (PM₁₀) mass column generated by the fire smoke exceeded that of ordinary pollution by an order of magnitude. Our regional chemistry-transport modelling is able to predict the early development of the plume dispersion, as shown by a qualitative comparison between simulated PM₁₀ columns and a satellite image obtained by the EOS-TERRA-MODIS sensor.If the accident had occurred in summer when boundary layers are much deeper and convective, a severe degradation in air quality due to PM₁₀ could have occurred, as shown by a sensitivity simulation assuming a similar fire during one of the hottest days of August 2003. The modelled impact of the fire on regional and European air quality levels strongly depends on the altitude reached by the buoyant plume, as shown by a set of sensitivity simulations with variable injection heights. However, in all cases we found that the fire only affected surface aerosol concentrations without increasing photochemical pollution.     

Transport of citrate and polymer coated gold nanoparticles (AuNPs) in porous media: Effect of surface property and Darcy velocity

With the release of nanoparticles(NPs) into the subsurface,it is imperative to better understand the fate and transport of NPs in porous media.Three types of stable AuNPs were used as model NPs to investigate the impact of surface coatings(type and coverage) and water velocity on the NP transport in a porous media(column studies).The NPs were electrostatic stabilized citrate AuNPs and sterically stabilized AuNPs with amphiphilic block co-polymer(PVA-COOH) in two particle/polymer ratios(weak vs.strong stabilization).The citrate AuNPs transport was sensitive to ionic changes in the mixing front of the plume,where destabilization occurred,and will therefore depend on the size/type of release.Blocking of deposition sites by aggregates was seen to facilitate transport,whereby a higher flow velocity(larger shadow zone) also resulted in better transport.The polymeric surface coating had great impact with steric repulsion as a main force contributing to the transport of NPs in the porous media.Sufficient polymer coating was crucial to obtain highly unfavorable attachment conditions(very low α) where the enhanced NP mobility was independent of the water velocity(comparable to solute tracer).Without sufficient steric stabilization,the transport and recovery was significantly reduced compared to the solute tracer,but increased with increasing water velocity.This highlights the importance of sufficient surface coating to achieve enhanced mobility,but also the increased risk of spreading to down-gradient receptors.For the(weakly) sterically stabilized NPs,the loss of polymer through ligand exchange with the porous media negates transport.     

Measurement of hydrogen peroxide and organic hydroperoxide concentrations during autumn in Beijing, China

Gaseous peroxides play important roles in atmospheric chemistry. To understand the pathways of the formation and removal of peroxides, atmospheric peroxide concentrations and their controlling factors were measured from 7:00 to 20:00 in September, October, and November 2013 at a heavily trafficked residential site in Beijing, China, with average concentrations of hydrogen peroxide (H₂O₂) and methyl hydroperoxide (MHP) at 0.55 ppb and 0.063 ppb, respectively. H₂O₂ concentrations were higher in the afternoon and lower in the morning and evening, while MHP concentrations did not exhibit a regular diurnal pattern. Both H₂O₂ and MHP concentrations increased at dusk in most cases. Both peroxides displayed monthly variations with higher concentrations in September. These results suggested that photochemical activity was the main controlling factor on variations of H₂O₂ concentrations during the measurement period. Increasing concentrations of volatile organic compounds emitted by motor vehicles were important contributors to H₂O₂ and MHP enrichment. High levels of H₂O₂ and MHP concentrations which occurred during the measurement period probably resulted from the transport of a polluted air mass with high water vapor content passing over the Bohai Bay, China.     

Critical review of EPS production, synthesis and composition for sludge flocculation

Extracellular polymeric substances(EPS) produced by microorganisms represent biological macromolecules with unfathomable potentials and they are required to be explored further for their potential application as a bioflocculant in various wastewater sludge treatment. Although several studies already exist on biosynthetic pathways of different classical biopolymers like alginate and xanthan, no dedicated studies are available for EPS in sludge. This review highlights the EPS composition, functionality, and biodegradability for its potential use as a carbon source for production of other metabolites. Furthermore, the effect of various extraction methods(physical and chemical) on compositional, structural, physical and functional properties of microbial EPS has been addressed. The vital knowledge of the effect of extraction method on various important attributes of EPS can help to choose the suitable extraction method depending upon the intended use of EPS. The possible use of different molecular biological techniques for enhanced production of desired EPS was summarized.