广元飞播造林成效与流域生态环境效益研究

运用川北广元历年飞播成效调查以及固定标准地观测的结果,结合笔者从事飞播造林技术与管理工作的经验,得出：飞播造林是速度快、省劳力、投资少、成本低、效益高的造林方式,推广飞机播种造林是绿化川北山地,迅速治理流域生态环境和实现山区经济可持续发展的有效措施     

Integrated energy management strategy of powertrain and cooling system for PHEV

ABSTRACT

Energy management strategy (EMS) is crucial in improving the fuel economy of plug-in hybrid electric vehicle (PHEV). Existing studies on EMS mostly manage powertrain and cooling system separately which cannot get the minimum total energy consumption. This paper aims to propose a novel EMS for a new type of dual-motor planetary-coupled PHEV, which considers cooling power demand and effect of temperature on fuel economy. Temperature-modified engine model, lithium-ion battery model, two motors, and cooling system models are established. Firstly, the separated EMS (S-EMS) is designed which manages powertrain and cooling system separately. Sequentially, after the analysis of thermal characteristics of the powertrain and cooling system, the thermal-based EMS (T-EMS) is then proposed to manage two systems coordinately. In T-EMS, cooling power demand and the charging/discharging energy of motors are calculated as equivalent fuel consumption and integrated into the object function. Besides, a fuzzy controller is also established to deicide the fuel-electricity equivalent factor with consideration of the effect of temperature and state of charge on powertrain efficiency. Finally, the hardware-in-loop experiment is carried out to validate the real-time effect of EMS under the New European Driving Cycle. The result shows that cooling power demand and temperature can significantly affect the fuel economy of the vehicle. T-EMS shows better performance in fuel economy than S-EMS. The equivalent fuel consumption of the cooling system of T-EMS decreases by 27% compared with that of S-EMS. The total equivalent fuel consumption over the entire trip of PHEV using T-EMS is reduced by 9.7%.     

Status of recycling end-of-life vehicles and efforts to reduce automobile shredder residues in Korea

The present end-of-life vehicle (ELV) recycle rate and management status during the dismantling stage were investigated to aid the establishment of policies for the management of ELVs by surveying information and using the results gained from questionnaires given to dismantlers. The average recycle rate at the dismantling stage was 44% of the mass of a new vehicle and the rest of the ELV was then compressed and transported to shredding companies to recover mainly the iron content, which averaged 38.7% of the mass of a new vehicle. Nonferrous metals such as copper, antimony, zinc, and aluminum accounted for only 1.5%. The automobile shredder residues (ASRs) were composed of light and heavy fluffs and soil/dust and amounted to 15.8% based on the mass of a new vehicle. The dumping of fluff and inorganic residues in landfill sites, however, will be restricted when new regulations are implemented to reduce the disposal amount to less than 5% of a new car, as has been done in European countries and in Japan. The detailed characteristics of ASR were investigated to suggest appropriate means of treatment such as volume reduction or the utilization of thermal technologies to meet future expected enforcement. Also, some concerns on hazardous pollutant release such as that of dioxins while utilizing such thermal treatment methods were considered. The present on-going research and development projects to meet such future management targets are also introduced.     

交通事故再现技术研究现状与发展趋势

道路交通事故再现不仅是交通事故责任鉴定和原因分析的重要方法,也是交通事故防治的重要内容。在详细介绍国内外事故再现计算机仿真技术的基础上,分析目前事故再现系统开发中事故现场数据采集技术、碰撞前后速度估算的技术、碰撞过程进行模拟的虚拟现实技术的研究现状与存在的问题,提出进一步优化的方向,进而达到完善交通事故模拟再现的目的。最后指出我国交通事故再现技术进一步研究的内容和发展趋势。     

车辆事故紧急呼救技术发展综述

综述了车辆事故紧急呼救技术的原理,从车辆事故检测识别技术、移动车辆定位技术、无线通信技术和地理信息系统几方面概述车辆事故紧急呼救技术的研究内容。进一步介绍车辆事故紧急呼救技术的国内外研究和应用现状,并从车辆事故识别技术、地图匹配及组合导航、集群通信及通信网络几方面总结并指出车辆事故紧急呼救技术的关键技术和难点。展望了车辆事故紧急呼救技术的发展趋势,并就我国发展车辆事故呼救技术的可行性和发展方向进行探讨。     

实现道路交通安全的营运车辆监控系统框架研究

当前营运车辆监管中,交通管理部门、运输企业和司乘人员3方没有直接的信息通道,导致监管不到位,影响道路交通安全。笔者探讨了营运车辆监控的信息传输通道;以GPS、无线通信技术和互联网为基础,设计了营运车辆监控的技术框架,实现了联系3方的信息传输通道;分析框架实现的关键技术,包括道路限速数据库,车辆超速、疲劳驾驶、超载等违法行为的判定模式等;以广东省营运车辆监控系统为例,验证了框架的可行性。该技术框架使司乘人员的交通违法行为被及时警告和提醒,交通管理部门可以及时制止交通违法行为,可以主动预防交通事故,提高道路交通安全水平。     

Investigation of seat belt use among the drivers of different education levels

Seat belt use habit has been investigated according to the education level of drivers. Copies of a questionnaire were distributed to 1000 participants of four different education levels. Factors such as seat belt usage habit, restricting factors and crash data have been investigated. Data have been analyzed with SPSS 15.0 software. Increased level of education leads to increased seat belt usage, lower numbers of crashes and crash severities. The factors restricting seat belt use are lack of habit, discomfort and short distance driving. The use of precaution signal and increases in comfort can increase seat belt usage. The primary and high school education on traffic safety and seat belt usage has been serving the purpose.     

广州市在用机动车排气抽检工作若干问题探讨

介绍了广州市在用机动车抽检工作情况和程序,分析了排气抽检工作中存在的问题,提出了解决问题的建议和方法。     

高速公路交通流实时安全性评价

根据多条高速公路近3年的事故数据及实时交通流数据,分析了高速公路运营安全性的相关影响因素,在此基础上提出了车速变异系数指标及其分级标准,建立了考虑交通流量、平均车速、车速变异系数、天气条件等多因素的高速公路交通流运行风险预测多元模型,并提出了高速公路交通流实时行车风险指数TRI指标,制定了交通流状态实时安全性评价标准,最后给出了高速公路交通流混合交通状态下的实时安全风险评价流程。通过西攀高速公路的交通流实时数据,验证了模型的有效性。     

The Real-World Safety Potential of Connected Vehicle Technology

Objective: This article estimates the safety potential of a current commercially available connected vehicle technology in real-world crashes.

Method: Data from the Centre for Automotive Safety Research's at-scene in-depth crash investigations in South Australia were used to simulate the circumstances of real-world crashes. A total of 89 crashes were selected for inclusion in the study. The crashes were selected as representative of the most prevalent crash types for injury or fatal crashes and had potential to be mitigated by connected vehicle technology. The trajectory, speeds, braking, and impact configuration of the selected in-depth cases were replicated in a software package and converted to a file format allowing “replay” of the scenario in real time as input to 2 Cohda Wireless MK2 onboard units. The Cohda Wireless onboard units are a mature connected vehicle technology that has been used in both the German simTD field trial and the U.S. Department of Transport's Safety Pilot project and have been tuned for low false alarm rates when used in the real world. The crash replay was achieved by replacing each of the onboard unit Global Positioning System (GPS) inputs with the simulated data of each of the involved vehicles. The time at which the Cohda Wireless threat detection software issued an elevated warning was used to calculate a new impact speed using 3 different reaction scenarios and 2 levels of braking.

Results: It was found that between 37 and 86% of the simulated crashes could be avoided, with highest percentage due a fully autonomous system braking at 0.7 g. The same system also reduced the impact speed relative to the actual crash in all cases. Even when a human reaction time of 1.2 s and moderate braking of 0.4 g was assumed, the impact speed was reduced in 78% of the crashes. Crash types that proved difficult for the threat detection engine were head-on crashes where the approach angle was low and right turn–opposite crashes.

Conclusions: These results indicate that connected vehicle technology can be greatly beneficial in real-world crash scenarios and that this benefit would be maximized by having the vehicle intervene autonomously with heavy braking. The crash types that proved difficult for the connected vehicle technology could be better addressed if controller area network (CAN) information is available, such as steering wheel angle, so that driver intent can be inferred sooner. More accurate positioning in the real world (e.g., combining satellite positioning and accelerometer data) would allow the technology to be more effective for near-collinear head-on and rear-end crashes, because the low approach angles that are common in such crashes are currently ignored in order to minimize false alarms due to positioning uncertainty.