MCM-41吸附法脱除烟气中二氧化硫的研究

基于活性炭吸附剂存在再生成本高、高温吸附能力差以及在高湿高温下脱附后性能严重下降等问题,研究采用MCM-41材料作为新型烟气脱硫吸附材料,该材料具有表观均匀、比表面积大、耐高温、脱附后能高效利用等优点,该研究设计了一种基于MCM-41材料的烟气脱硫吸附装置.介绍了该烟气脱硫吸附装置的结构、工作原理,并对MCM-41材料...     

水体和甘蓝及土壤中毒死蜱残留检测方法

研究运用不同的样品前处理方式,在装配火焰光度检测器的气相色谱(GC-FPD)上检测,建立了有机磷杀虫剂毒死蜱在水样、土壤和甘蓝中的残留测定方法.研究表明,不同样品中的毒死蜱残留采用本文中介绍的前处理方法是可行的,用石油醚盐析提取和净化水样中毒死蜱,采用丙酮振荡提取甘蓝中毒死蜱,选用索氏提取法提取土壤中毒死蜱,并经液液分配净化后,采用OV-101大口径毛细管柱(30 m×0.53 mm×1.0μm),在装配火焰光度检测器(FPD和磷滤光片)的气相色谱上测定.该分析方法下,毒死蜱的保留时间为1.74 min,线性范围在1.0×10-11—1.0×10-8g之间,其线性相关系数为0.9998,最小检出量为2.0×10-12g.在设定的较低添加浓度的条件下,毒死蜱在水样、土壤与甘蓝上的添加回收率为80%—120%,变异系数均小于5%.该分析方法灵敏、准确、操作简便,适合水样、甘蓝和土壤中低浓度毒死蜱的残留检测.     

五氟苯甲酰氯衍生色谱法分析水体中痕量羟基多溴联苯醚

以五氟苯甲酰氯(PFBCl)作为衍生化试剂,气相色谱-电子捕获检测器(Gas chromatography-electron capture detector,GC-ECD)为检测手段,建立了水体中痕量羟基多溴联苯醚(Hydroxylated polybrominated diphenyl ethers,简称OH-PBDEs)的酰基化衍生-GC/ECD检测方法.通过实验讨论了衍生化缓冲溶液、衍生化时间以及衍生后萃取溶液异辛烷的用量对检测结果的影响,确定了最佳的衍生化条件.在最佳的衍生化条件下,4-OH-BDE 42、4’-OH-BDE 49、6-OH-BDE 47、2’-OH-BDE 68和6’-OH-BDE 99的衍生化产物均获得了良好的分离度和色谱响应值.本方法的仪器检出限为0.02—0.14 pg,方法检出限为0.61—4.67 pg.L-1,标准曲线线性相关系数的范围为0.9973—0.9996,相对标准偏差均小于10%.3种采自大连市不同地区环境水样的加标回收率检测结果表明,所建立的分析方法适于水体中痕量OH-PBDEs的检测.     

水中乙醛和丙烯醛分析方法的对比

对测定水中乙醛和丙烯醛的3种方法——2,4-二硝基苯肼衍生化法、顶空气相色谱法和吹扫捕集一气相色谱质谱法进行概述和总结,并对各方法的试验条件、方法原理、测定影响因素以及效能验证等分析、比对,突出表现各自的优势和特点。用3种方法同时测定实际水样,结果无显著差异,精密度、准确度满足监测要求。     

生活小区供暖系统的问题及对策

针对神龙襄樊生活小区的供暖现状,结合襄樊基地供热管网的运行情况,就小区普遍存在的供暖个别单体不热、冷暖不均、管网失调、系统存气等问题,作了具体分析,并提出解决办法以供探讨.     

Sound management of brominated flame retarded (BFR) plastics from electronic wastes: State of the art and options in Nigeria

Management of flame retarded plastics from waste electrical and electronic equipment (WEEE) has been posing a major challenge to waste management experts because of the potential environmental contamination issues especially the formation of polybrominated-dioxins and -furans (PBDD/F) during processing. In Nigeria, large quantities of electronic waste (e-waste) are currently being managed—a significant quantity of which is imported illegally as secondhand electronics. As much as 75% of these illegal imports are never reused but are rather discarded. These waste electronic devices are mostly older equipment that contains brominated flame retardants (BFRs) such as penta-brominated diphenyl ethers (PBDEs), and polybrominated biphenyls (PBBs) which are presently banned in Europe under the EU WEEE and RoHS Directives. Risk assessment studies found both to be persistent, bio-accumulative and toxic. The present management practices for waste plastics from WEEE in Nigeria, such as open burning and disposal at open dumps, creates potential for serious environmental pollution. This paper reviews the options in the environmentally sound management of waste plastics from electronic wastes. Options available include mechanical recycling, reprocessing into chemicals (chemical feedstock recycling) and energy recovery. The Creasolv^® and Centrevap^® processes, which are the outcome of the extensive research at achieving sound management of waste plastics from WEEE in Europe, are also reviewed. These are solvent-based methods of removing BFRs and they presently offer the best commercial and environmental option in the sound management of waste BFR-containing plastics. Because these developments have not been commercialized, WEEE and WEEE plastics are still being exported to developing countries. The industrial application of these processes and the development of eco-friendlier alternative flame retardants will help assure sound management of WEEE plastics.     

Using LCA to evaluate impacts and resources conservation potential of composting: A case study of the Asti District in Italy

Separate collection of municipal solid waste has overcome the 50% threshold in the Asti District in northern Italy, nearly one-third being composed of household and green organic waste. In order to address present and future solutions, it becomes therefore fundamental to assess the environmental performances of the current management of organic waste from separate collection. A from-gate-to-cradle life cycle assessment (LCA) model has been developed by expanding system boundaries, in order to carry out the assessment in the context of the whole waste management streamline. The environmental performances of an existing aerobic plant were made available, based on field measured data, by paying attention to the role and contribution of waste management subsystems. The need for actual and reliable data on materials and energy input, as well as gross and net gains from materials recovery, including benefits arising from use of compost in farming activities, was probably the major drawback that had to be faced. The study integrated the findings of different investigations from the literature with field measured data in order to obtain a more comprehensive framework representative of the area under study. The results may help public administrators to better understand the suitability of using LCA tools when dealing with solid waste management strategies.     

Relation of waste generation and composition to socio-economic factors: a case study

To develop an effective waste management strategy for a given region, it is important to know the amount of waste generated and the composition of the waste stream. Past research has shown that the amount of waste generated is proportional to the population and the average mean living standards or the average income of the people. In addition, other factors may affect the amount and composition of waste. These are climate, living habits, level of education, religious and cultural beliefs, and social and public attitudes. This paper presents the findings of a study carried out in a suburban municipal area in Sri Lanka to determine the solid waste generation rate and waste composition based on field surveys and to determine the related socio-economic factors. A database was developed that included information on the quantity and composition of waste generated in a sample of households in the study area over a time period. The collected data was analysed to relate waste generation and composition data to various socio-economic factors. Over 400 sample households were selected for the study using a stratified random sampling methodology based on municipal wards and property values. A technique that considers both the number of households in a particular income group (property value range) and the standard deviation of property values within a given income group was used to determine the appropriate sample size for each municipal ward. Through category and regression analyses, the quantities of waste and waste composition were related to several socio-economic factors. The paper describes the basis for the sample selection, the methodology adopted for data collection, the socio-economic parameters used for the analysis, and the relationships developed from the analysis.     

垃圾填埋场稳定化及其研究现状

文章对直埋场稳定化过程进行了初步描述,并从填埋气、渗滤液、垃圾组成和沉降等４个方面总结了填埋场稳定化的研究现状。     

燃气爆炸作用下房屋裂缝开展的分形模拟

烯气爆炸灾害下房屋裂纹开展有的模式与受均布压力破坏时的相同,在参照实验所得混凝土裂缝的分形维数资源的基础上编制了相应的软件,利用分形插值的方法实现裂缝开展的模拟,模拟结果较好地反映了裂缝发展的真实情况,且较以往的模拟方法节约了大量存储空间。