微波消解/ICP-AES法分析冶炼厂固废中重金属

分析固体废物中金属元素全量分析的微波消解条件,通过实验确定样品的粉碎粒度、消解功率、消解温度、消解时间等因素对样品消解效果的影响,以等离子发射光谱测定冶炼厂固体废物中24种痕量金属元素,通过测定的检出限、精密度、准确度,确立冶炼厂固体废物痕量金属全量分析检测方法准确高效。     

生活垃圾中废塑料分选回收技术概述

近年来,废塑料在城市生活垃圾中占有相当大的比例,其含量正呈逐年上涨的趋势,因此对塑料进行分选和资源化利用势在必行。塑料分选技术是摆在我们中间的一项难题,目前生活垃圾废塑料的分选技术五花八门．由于在全国各地废塑料在垃圾中的还水量等因素的影响,现实中能实现废塑料的分选还不成熟。因此,研究一套适合废塑料的分选技术迫在眉睫。     

基于情景分析的城市餐厨垃圾处理方案研究

城市生态环境保护是生态文明建设的重要组成部分之一,而餐厨垃圾是影响城市生态环境的一种主要污染源,因此,有效处理餐厨垃圾也是当前城市生态环境保护的重要内容。本文以重庆市为例,针对其特殊的餐厨垃圾组成成分,调查分析了其主城区餐厨垃圾污染状况及处理难点,提出了3种主要处理方案情景并进行综合效益评价。结果表明建立餐厨垃圾小型处理站是最优方案,其成本效益核算结果说明当政府基金和垃圾产量有限时,也可采用缩小处理站规模以达到最高的组合效益。     

液相色谱法测定底泥中阿特拉津的不确定度评定

摘要：文章采用实验室内部的非标准方法《底泥中阿特拉津残留量的液相色谱测定方法》测定底泥中的阿特拉津残留量。通过对影响测定结果的不确定度分量的分析和量化,求出被测量的标准不确定度,给出各分量对测定结果不确定度的相对贡献,对测定结果进行了表述。对实际河道底泥样品中的阿特拉津残留量进行了测定,得到阿特拉津农药残留量的拓展不确定度为0．23ug/g,k=2。     

废弃电池能否进入废弃电器电子产品处理目录（第二批）管理的筛选评估分析

2009年2月,国务院发布《废弃电器电子产品回收处理管理条例》,成为我国废弃电器电子产品回收处理的纲领性文件。在《废弃电器电子产品处理目录（第一批）》中,明确将电视机、电冰箱、洗衣机、房间空调器、微型计算机等5种产品纳入第一批目录。同时,为了为了能够及时、客观地与经济发展、技术进步以及电器电子产品行业的发展变化等相适应,《目录》管理委员会起草了《制订和调整废弃电器电子产品处理目录的若干规定》,明确随着经济发展变化及电子产品废弃形势调整电器电子产品处理目录的原则。废弃电池在近几年来在我国增长速度很大,将来的管理形势十分紧迫。本文在此分析我国几种废弃电池（铅酸电池、镍氢电池及锂电池）的产生量、再生处理处置情况及管理政策导向。并在目录一批筛选原则的基础上利用权重分析法,筛选评估废弃电池能否进入废弃电器电子产品处理目录（第二批）管理的可能,研究显示铅酸电池已具备进入管理目录的资质。     

Minimizing leakage from a smelter off-gas system by enhanced control

The off-gas handling system is a vital component of a smelter and it is essential that it operates in accordance with environmental regulations. A key feature of the off-gas management system is maintaining a slightly negative system pressure to prevent gas leakage, such as SO₂, out into the work and external environments. To enhance sustainable development, there is also growing interest in capturing and reusing the significant amount of heat and CO₂ contained within off-gas. The potential incorporation of heat and CO₂ recovery systems places importance on enhancing control to minimize the risk of both gas leakage and disturbance of the smelting process. With these requirements in mind, an easily implementable feedforward control enhancement to existing control schemes is proposed to help provide improved performance.     

Environmental and economic assessment of a greenhouse waste heat exchange

As the economic costs of energy and the negative externalities associated with the combustion of fossil fuels threaten the economic viability of greenhouses in northern climates there is a renewed interest in the use of waste heat. This paper presents a technical and economic methodology to determine the viability of establishing waste heat greenhouses using the waste heat from industrial processes in northern climates. A case study is presented of an exchange between a tomato greenhouse and a flat glass manufacturing plant, which found the waste heat system is significantly more economic to operate than a purely natural gas system.     

Recycling of FRP composites: reusing fine GFRP waste in concrete mixtures

Fibre reinforced polymer (FRP) materials are being increasingly used in several applications, but especially in the construction and transportation industries. The composites industry is now producing a wide range of FRP products that include strengthening strips and sheets, reinforcing bars, structural profiles, sandwich panels, moulded planks and piping. The waste management of FRP materials, in particular those made with thermosetting resins, is a critical issue for the composites industry because these materials cannot be reprocessed. Therefore, most thermosetting FRP waste is presently sent to landfill, in spite of the significant environmental impact caused by disposing of it in this way. Because more and more waste is being produced throughout the life cycle of FRPs, innovative solutions are needed to manage it. This paper first presents a state-of-the-art review of the present alternatives available to manage FRP waste. It then describes an experimental study conducted on the technical feasibility of incorporating the fine waste generated during the manufacturing of glass fibre reinforced polymer (GFRP) composites in concrete mixtures. Tests were carried out to evaluate the fresh-state and hardened-state properties of concrete mixes in which between 0% and 20% of sand was replaced by GFRP fine waste. Although the incorporation of high proportions of GFRP waste was found to worsen concrete performance in terms of both mechanical and durability-related properties, it seems feasible to incorporate low proportions and reuse GFRP fine waste in concrete, particularly in non-structural applications such as architectural concrete or pavement slabs, where good mechanical properties are less important.     

广东省荔枝园土壤农药残留现状研究

荔枝收获完毕后在广东省荔枝主产区采集208个荔枝园土壤样本,检测了9种荔枝常用农药甲霜灵、代森锰锌、多菌灵、溴氰菊酯、氯氰菊酯、三氟氯氰菊酯、敌百虫、乐果和敌敌畏的残留含量.结果表明,农药检出率为氯氰菊酯(59.1%)多菌灵(51.0%)代森锰锌(11.1%)甲霜灵(6.7%)三氟氯氰菊酯(3.4%).乐果和敌敌畏仅在个别果园检出,溴氰菊酯和敌百虫均未检出.土壤同时检出不同种类农药果园的百分数为只检出1种农药(40.4%)同时检出2种(31.3%)未检出(18.8%)同时检出3种(8.2%)同时检出4种(1.4%).检出的7种农药中,代森锰锌残留平均含量最高达39.05μg·kg-1,氯氰菊酯次之为7.83μg·kg-1.其它5种农药平均含量为0.19～1.65μg·kg-1.整体上广东省荔枝园土壤农药残留状况较轻.     

戊唑醇残留分析方法实验室内质量控制研究

文章确立了小麦、香蕉中戊唑醇残留检测方法,小麦样品加水10 mL用丙酮为萃取溶剂,石油醚液液分配,中性氧化铝柱层析净化,用气相色谱(GC-NPD)检测。香蕉样品加水5 mL用丙酮为萃取溶剂,石油醚液液分配,浓缩后用气相色谱(GC-NPD)检测。分别设置不同时间批次,同一批次间的平行样及实验室内人员分析,分别从方法灵敏度、方法准确度、方法精密度及其质量控制图、标准工作液的稳定性来探讨该方法的可靠性,结果表明该方法可以作为香蕉和小麦种戊唑醇残留检测的标准分析方法。