Characterization of dissolved organic matter in the rhizosphere of hyperaccumulator Sedum alfredii and its effect on the mobility of zinc

Pot experiments were performed to investigate the characteristics of dissolved organic matter (DOM) in the rhizosphere soil of hyperaccumulating ecotype (HE) and a non-hyperaccumulating ecotype (NHE) of Sedum alfredii and its effects on the mobility of zinc (Zn). DOM was fractionated using XAD resins into six fractions. The acid fraction was the predominant component of DOM in the rhizosphere of S. alfredii, with hydrophilic acid (HiA), hydrophilic base (HiB), and hydrophilic neutral (HiN) in HE-DOM being 1.6, 1.9, and 1.2 times higher respectively, as compared to NHE-DOM. ATR-FTIR results showed that DOM in the rhizosphere of S. alfredii consisted of a mixture of hydroxylated and carboxylic acids, and HE-DOM exhibited more CO, OH, CC and CO functional groups than NHE-DOM. Resin equilibration experiment results indicated that DOM from the rhizosphere of both ecotypes of S. alfredii had the ability to form complexes with Zn, whereas the degree of complexation was significantly higher for HE-DOM (60%) than NHE-DOM (42%). The addition of HE-DOM significantly (P < 0.05) increased the solubility of four Zn minerals while NHE-DOM was not as effective at the same concentration. It was concluded that DOM derived from the rhizosphere of hyperaccumulating ecotype of S. alfredii could significantly increase Zn mobility through the formation of soluble DOM-metal complexes, this might be one of the important mechanism by which S. alfredii is involved in activating metal in rhizosphere.     

Effects of cadmium and zinc on larval growth and survival in the ground beetle,Pterostichus oblongopunctatus

Carabid beetles, like Pterostichus oblongopunctatus, living in metal contaminated areas may be exposed to elevated levels of metals within their diets. However, when compared to other second order consumers, they have one of the lowest observed levels of metals, indicating methods of detoxification to deal with such toxicants. In this study, we investigated if chronic, multigenerational exposure to metals leads to resistance to toxic metal concentrations, and if so, what are the costs associated with them. Adult organisms were collected from two sites, a polluted and a reference site near Olkusz, in southern Poland. These adults were immediately mated, and eggs were collected twice weekly to assess the effects in the larvae of the F(1) generation. Larvae were randomly exposed to one of four artificial mediums: control, 50 mg kg(-1) Cd, 500 mg kg(-1) Zn, and a combined treatment of 50 mg kg(-1) Cd and 500 mg kg(-1) Zn to investigate possible interactions. Individuals were sacrificed at 10, 30, and 40 days. Although metals were not accumulated in larvae (p>0.05), larvae fed the Cd or the Zn treatment grew significantly slower, and had the lowest survival rate (p<0.05) in respect to control. Out of metal treated animals, those on the combined treatment of CdZn grew the quickest and had the highest observed survival (p<0.05). Although previous studies have demonstrated changes in adult population parameters under chronic, multigeneration exposure to toxic metal concentrations, our study did not reveal any changes in the larval stage.     

The toxicity of copper,cadmium and zinc to four different Hydra (Cnidaria: Hydrozoa)

An acute toxicity study of three metals to Hydra species carried out using two different assessment methods, (i) determination of the LC50 and (ii) measurement of progressive morphological changes, demonstrated that relative toxicity decreased from copper to cadmium with zinc the least toxic for all species. The latter method revealed more details of the effect on Hydra in terms of physical damage to the polyp but both methods indicated that H. viridissima was more sensitive to copper and cadmium than H. vulgaris¹ (Zurich strain, male clone), H. vulgaris² (a dioecious strain reproducing sexually and asexually) and H. oligactis (dioecious, reproducing sexually and asexually). The responses to zinc were similar for all Hydra. The possible role of metabolic interactions between H. viridissima and its symbiotic green algae in contributing to the greater sensitivity of this polyp is discussed.     

炼铜烟灰制取高纯度硫酸锌

采用炼钢烟灰制取高纯度硫酸锌,研究了制取条件对收率和产品质量的影响,试验结果表明,控制适宜的酸浸条件,锌浸取率≥９８％,铁浸取率可控制在０．０２％以下,当酸浸工艺条件液固比为３：１,温度８０－９０℃,硫酸加入量３９ｇ／Ｌ（酸浸液）滴酸时间１．５ｈ浸取时间２ｈ,再用空气和过氧化氢氧化除去溶液中的铁,产品中硫酸锌含量≥９９％,铁含量可降至０．５ｍｇ／Ｌ以下。     

Speciation of zinc in contaminated soils

The chemical speciation of zinc in soil solutions is critical to the understanding of its bioavailability and potential toxic effects. We studied the speciation of Zn in soil solution extracts from 66 contaminated soils representative of a wide range of field conditions in both North America and Europe. Within this dataset, we evaluated the links among the dissolved concentrations of zinc and the speciation of Zn(2+), soil solution pH, total soil Zn, dissolved organic matter (DOM), soil organic matter (SOM) and the concentrations of different inorganic anions. The solid-liquid partitioning coefficient (K(d)) for Zn ranged from 17 to 13,100Lkg(-1) soil. The fraction of dissolved Zn bound to DOM varied from 60% to 98% and the soil solution free Zn(2+) varied from 40% to 60% of the labile Zn. Multiple regression equations to predict free Zn(2+), dissolved Zn and the solid-liquid partitioning of Zn are given for potential use in environmental fate modeling and risk assessment. The multiple regressions also highlight some of the most important soil properties controlling the solubility and chemical speciation of zinc in contaminated soils.     

Desorption characteristics of kaolin clay contaminated with zinc from electrokinetic soil processing

A number of bench scale laboratory column tests were carried out using a newly designed and developed electrokinetic cell to investigate the fundamental behavior of zinc-spiked kaolin clay subjected to an electric field. Laboratory investigations focused on (i) zinc migration by the combined effects of electromigration and electro-osmosis and (ii) the electrically induced desorption characteristics of zinc-contaminated kaolin that occurred during processing. The correlations of the applied voltage gradient, electro-osmotic flow rate, and the development of a pH gradient were examined and evaluated. The results showed that the removal efficiency was high during the early stage of processing due to rapid desorption by electrokinetic effects in the cathode region. However, the majority of zinc migrating from the anode was precipitated due to the high pH environment in the cathode region.     

典型因素对含锌废盐酸制备磷酸锌的影响机制研究

以含锌废盐酸为原料制备磷酸锌［Zn3(PO4)2］,探讨含锌废盐酸中Zn、Fe、Cr、Ni等重金属质量分数、TOC质量浓度、磷酸体积分数和反应时间等典型因素对Zn3(PO4)2纯度及化学组成结构的影响,并用XRD及SEM表征Zn3(PO4)2的物相结构。结果表明,含锌废盐酸可制备纯度较高、结构较为稳定的Zn3(PO4)2产品,制备过程中废盐酸中的Fe对Zn3(PO4)2产出纯度的影响较大;Zn3(PO4)2的产出纯度随TOC质量浓度的升高而下降;当磷酸体积分数低于85%时,对Zn3(PO4)2产出纯度总体呈正相关趋势,而高于85%后,产出纯度则有所降低;反应时间为5 h时制备Zn3(PO4)2的效率最高。     

Monitoring, assessment and modelling using water quality data in the Saale River Basin, Germany

The European Water Framework Directive (WFD) is the overall driver for this environmental study and currently requires the identification of patterns and sources of pollution (monitoring) to support objective ecological sound decision making and specific measures to enhance river water quality (modelling). The purpose of this paper is to demonstrate in a case study the interrelationship between (1) hydrologic and water quality monitoring data for river basin characterization and (2) modelling applications to assess resources management alternatives. The study deals with monitoring assessment and modelling of river water quality data of the main stem Saale River and its principal tributaries. For a period of 6 years the data, which was sampled by Environmental Agencies of the German states of Thuringia, Saxony and Saxony-Anhalt, was investigated to assess sources and indicators of pollution. In addition to the assessment a modelling exercise of the routing of different pollutants was carried out in the lower part of the test basin. The modelling is a tool to facilitate the evaluation of alternative measures to reduce contaminant loadings and improve ecological status of a water body as required by WFD. The transport of suspended solids, salts and heavy metals was modelled along a selected Saale reach under strong anthropogenic influence in terms of contaminants and river morphology between the city of Halle and the confluence with the Elbe River. The simulations were carried out with the model WASP5 which is a dynamic flood-routing and water quality model package developed by the US Environmental Protection Agency.     

Selective recovery of Cu(II) from strongly acidic wastewater by zinc dimethyldithiocarbamate: Affecting factors, efficiency and mechanism

The selective recovery of copper from strongly acidic wastewater containing mixed metal ions remains a significant challenge. In this study, a novel reagent zinc dimethyldithiocarbamate (Zn(DMDC)₂) was developed for the selective removal of Cu(II). The removal efficiency of Cu(II) reached 99.6% after 120 min reaction at 30°C when the mole ratio Zn(DMDC)₂/Cu(II) was 1:1. The mechanism investigation indicates that the Cu(DMDC)₂ products formed as a result of the displacement of Zn(II) from the added Zn(DMDC)₂ by Cu(II) in wastewater, due to the formation of stronger coordination bonds between Cu(II) and the dithiocarbamate groups of Zn(DMDC)₂. Subsequently, we put forward an innovative process of resource recovery for strongly acidic wastewater. Firstly, the selective removal of Cu(II) from actual wastewater using Zn(DMDC)₂, with a removal efficiency of 99.7%. Secondly, high-value CuO was recovered by calcining the Cu(DMDC)₂ at 800°C, with a copper recovery efficiency of 98.3%. Moreover, the residual As(III) and Cd(II) were removed by introducing H₂S gas, and the purified acidic wastewater was used to dissolve ZnO for preparation of valuable ZnSO₄·H₂O. The total economic benefit of resource recovery is estimated to be 11.54 $/m³. Accordingly, this study provides a new route for the resource recovery of the treatment of copper-containing acidic wastewater.     

Refinery wastewater degradation with titanium dioxide,zinc oxide,and hydrogen peroxide in a photocatalytic reactor

This paper presents the photo-catalytic degradation of real refinery wastewater from National Refinery Limited (NRL) in Karachi, Pakistan, using TiO₂, ZnO, and H₂O₂. The pretreatment of the refinery effluent was carried out on site and pretreated samples were tested at 32–37 °C in a stirrer bath reactor by using ultra-violet photo oxidation process. The degradation of wastewater was measured as a change in initial chemical oxygen demand (COD) and with time. Optimal conditions were obtained for catalyst type, and pH. The titanium dioxide proved to be very effective catalysts in photo-catalytic degradation of real refinery wastewater. The maximum degradation achieved was 40.68% by using TiO₂ at 37 °C and pH of 4, within 120 min of irradiations. When TiO₂ was combined with H₂O₂ the degradation decreased to 25.35%. A higher reaction rate was found for titanium dioxide. The results indicate that for real refinery wastewater, TiO₂ is comparatively more effective than ZnO and H₂O₂. The experiments indicated that first-order kinetics can successfully describe the photo-catalytic reaction. The ANOVA results for the model showed satisfactory and reasonable adjustment of the second-order regression model with the experimental data. The ANOVA results also showed that pH is significant than reaction time and catalyst dosage of TiO₂; and in case of ZnO, reaction time is significant than pH and catalyst dosage. This study proves that real refinery wastewater reacts differently than synthetic refinery wastewater, oil field produced water or oil water industrial effluent.