茅草添加与温度变化对餐厨垃圾厌氧水解产酸的影响

比较了茅草添加在温度变化条件下对餐厨垃圾厌氧水解过程小分子有机酸产量的影响,提出一种新型餐厨垃圾的资源化方式。研究结果显示,餐厨垃圾在55℃条件下厌氧水解主要产物为乳酸,达到25．7g／L,其干物质转化率可以达到32．1％（gTS）,而餐厨＋茅草处理在同样条件下的乳酸产量为20．1g／L,干物质转化率为25．1％。温度下降为37℃后继续进行的的厌氧水解,得到的主要产物是乙酸、丙酸和丁酸,餐厨处理和餐厨＋茅草处理这两者的峰值分别为6．5、2．8、8．0和6．1g／L、2．7g／L和5．9g／L。结果显示茅草添加可以在一定程度上调节水解产物的比例,而温度变化可以调控小分子有机酸的产量。本研究结果表明,厌氧水解是一种有潜力的小分子有机酸生产与餐厨垃圾资源化处理途径。     

水环境中腐殖酸与镉离子结合作用的影响因素

通过测定不同化学条件下腐殖酸与镉离子作用后的游离态镉离子浓度及其结合率,研究各因素对腐殖酸与镉离子作用的影响。研究结果表明,pH值、离子强度、投加镉离子总浓度、腐殖酸浓度和反应温度均影响腐殖酸与镉离子的结合。pH值在4.5~6.5范围内,随pH值升高,腐殖酸与Cd²⁺的结合率增大,游离态Cd²⁺浓度减少。溶液的离子强度增大对结合反应有抑制作用。投加Cd²⁺总浓度的增大会导致结合态Cd²⁺浓度和游离态Cd²⁺浓度逐渐增加,而其结合率逐渐减小。腐殖酸浓度逐渐增大,使Cd²⁺和腐殖酸的结合率逐渐增大。在20℃~50℃范围内时,随反应温度升高,游离态Cd²⁺浓度逐渐减小,其结合率逐渐增加。     

几种印染助剂对壳聚糖稳定纳米铁去除酸性品红的影响

以氯化铁为铁源,硼氢化钠为还原剂,壳聚糖为稳定剂,采用液相还原法制备壳聚糖稳定纳米铁（CS-nZⅥ）;研究了印染废水中常见助剂NaNO₃、Na₂SO₄、NaH₂PO₄、K₂Cr₂O₇、EDTA二钠盐存在下,超声波辅助CS-nZⅥ对酸性品红（AF）降解的影响。结果表明,反应15 min,0.01 g CS-nZⅥ对25 mL、100 mg/L AF的去除率高达99.9%;各种助剂的存在使得纳米铁表面不同程度失活,阻碍反应的进行,使得AF的去除率下降。NaNO₃、K₂Cr₂O₇、EDTA二钠盐与纳米铁发生反应,与AF存在明显的竞争作用。重复利用实验表明,CS-nZⅥ重复利用7次仍具有一定的反应活性。此外,CS-nZⅥ对加标（50 mg/L）实际废水中AF的去除率达到99%以上,表明CS-nZⅥ是一种潜在的环境修复材料。     

一种新型Fenton-流化床催化剂的制备及表征

非均相Fenton-流化床体系主要使用石英砂作为催化剂载体,该技术的实际应用由于催化剂活性寿命低、制备困难等原因而受到限制.提出了一种新型的Fenton-流化床催化剂——负载氧化铁陶粒.使用循环浸泡法制备的负载陶粒对苯甲酸模拟废水的处理效果良好.表征结果分析表明,载体表面铁含量大幅度上升,负载的氧化铁紧紧包裹在陶粒表面,且表面有大量缝隙,利于增加反应比表面积,而密度变化不大.该催化剂的催化活性重复性良好,重复使用4次后对苯甲酸模拟废水依然有较好的处理效果.使用该催化剂进行垃圾渗滤液的降解实验能在一定程度上减少亚铁的投加量,具有较好的实际应用前景.     

改性蚁酸木质素的制备与应用

采用加拿大一枝黄花茎杆为原料提取蚁酸木质素,通过氧化或接枝复合的方法对蚁酸木质素进行改性,对改性产物进行了FTIR和SEM表征。实验结果表明：接枝复合改性产物中存在-CONH的接枝复合链,氧化改性产物基本保持了蚁酸木质素原来的吸收峰;采用接枝复合改性产物处理初始质量浓度为50 mg/L的亚甲基蓝废水,在废水pH 7、吸附时间4 h、改性产物加入量22 mg/mL的条件下,亚甲基蓝去除率为90.94%;采用氧化改性产物处理相同亚甲基蓝废水,在废水pH 10、吸附时间12 h、改性产物加入量22 mg/mL的条件下,亚甲基蓝去除率为81.93%。     

交联壳聚糖/沸石复合吸附剂的制备及性能

用沸石负载由缩水甘油基三乙基氯化铵交联的壳聚糖,制得了性能良好的交联壳聚糖/沸石复合吸附剂。研究了该吸附剂应用性能的影响因素,探讨了该吸附剂的吸附性、沉降性和重复使用性,利用FTIR仪和高倍透射电子显微镜对该吸附剂的结构进行了表征。实验结果表明:壳聚糖的交联度为0.93、交联壳聚糖与沸石的质量比为0.045时,制得的交联壳聚糖/沸石复合吸附剂对腐殖酸的去除率可达81.4%,吸附量为4.07mg/g;交联壳聚糖/沸石复合吸附剂对腐殖酸的吸附性能较沸石有显著提高,沉降时间较交联壳聚糖明显缩短;经二次洗脱后腐殖酸去除率仍可达80.2%,腐殖酸吸附量为4.01mg/g。     

紫外辐照-催化湿式过氧化氢氧化技术处理酸性大红GR染料废水

采用自制的负载型CuO-ZnO-CeO2/γ-Al2O3催化剂,常温常压下通过紫外辐照-催化湿式氧化技术处理酸性大红GR模拟染料废水。考察了催化剂加入量、H2O2加入量、废水pH、反应时间、初始酸性大红GR质量浓度等对废水脱色率的影响。实验得到最佳工艺条件为初始酸性大红GR质量浓度200mg/L,催化剂加入量10.0g/L,H2O2加入量2.0mL/L,废水pH4,反应时间2h。最佳工艺条件下废水脱色率达99.33%。     

盐析分相微萃取—高效液相色谱法测定水中含氯除草剂

采用盐析分相微萃取—高效液相色谱法同时测定水中3种含氯除草剂,建立并优化了反相离子对液相色谱条件,考察了萃取剂种类、盐析剂的种类和加入量及试样pH对萃取效果的影响。对氯苯氧乙酸、2,4-二氯苯氧乙酸和2,4-滴丁酯的质量浓度在0.1~100.0mg/L内与色谱峰面积呈良好的线性关系,相关系数不低于0.9992。平均回收率分别为96.29%、79.16%和70.21%,相对标准偏差小于5.3%。该方法操作简便、绿色环保,适合于水中含氯除草剂的测定。     

Electrochemical oxidation of herbicide bifenox acid in aqueous medium using diamond thin film electrode

The electrochemical oxidation of bifenox acid was studied at a boron-doped diamond thin film by cyclic voltammetry and galvanostatic electrolysis. The course of the electrolysis was monitored by measurement of chemical oxygen demand (COD) and by gas chromatography/mass spectrometry (GC / MS) analysis. It was found that exhaustive electrolysis leads to degradation and, ultimately, to mineralization of the starting herbicide. The degradation intermediates were identified showing that the oxidation process begins with the fragmentation of the molecule followed by reactions involving the hydroxyl radical, which is generated by the discharge of water. The study of the effect of current density and concentration showed that the degradation efficiency increases with decreasing current densities and increasing concentrations. The whole results were interpreted in a mechanistic scheme involving two oxidation pathways, the first is a direct oxidation at the electrode and the second uses hydroxyl radical as mediator of the oxidation. Finally, a kinetic study based on spectrophotometric measurements showed that the degradation process is pseudo first order.     

Sorption–desorption of imidacloprid onto a lacustrine Egyptian soil and its clay and humic acid fractions

Sorption–desorption of the insecticide imidacloprid 1-[(6-chloro-3-pyridinyl)-methyl]-N-nitro-2-imidazolidinimine onto a lacustrine sandy clay loam Egyptian soil and its clay and humic acid (HA) fractions was investigated in 24-h batch equilibrium experiments. Imidacloprid (IMDA) sorption–desorption isotherms onto the three sorbents were found to belong to a non-linear L-type and were best described by the Freundlich model. The value of the IMDA adsorption distribution coefficient, Kd_ads, varied according to its initial concentration and was ranged 40–84 for HA, 14–58 for clay and 1.85–4.15 for bulk soil. Freundlich sorption coefficient, Kf_ads, values were 63.0, 39.7 and 4.0 for HA, clay and bulk soil, respectively. The normalized soil Koc value for imidacloprid sorption was ～800 indicating its slight mobility in soils. Nonlinear sorption isotherms were indicated by 1/n_ads values <1 for all sorbents. Values of the hysteresis index (H) were <1, indicating the irreversibility of imidacloprid sorption process with all tested sorbents. Gibbs free energy (ΔG) values indicated a spontaneous and physicosorption process for IMDA and a more favorable sorption to HA than clay and soil. In conclusion, although the humic acid fraction showed the highest capacity and affinity for imidacloprid sorption, the clay fraction contributed to approximately 95% of soil-sorbed insecticide. Clay and humic acid fractions were found to be the major two factors controlling IMDA sorption in soils. The slight mobility of IMDA in soils and the hysteresis phenomenon associated with the irreversibility of its sorption onto, mainly, clay and organic matter of soils make its leachability unlikely to occur.