Characterization and Identification of the Sources of Chromium, Zinc, Lead, Cadmium, Nickel, Manganese and Iron in Pm10 Particulates at the Two Sites of Kolkata, India

Monitoring of ambient PM₁₀ (particulate matter which passes through a size selective impactor inlet with a 50% efficiency cut-off at 10 μm aerodynamic diameter) has been done at residential (Kasba) and industrial (Cossipore) sites of an urban region of Kolkata during November 2003 to November 2004. These sites were selected depending on the dominant anthropogenic activities. Metal constituents of atmospheric PM₁₀ deposited on glass fibre filter paper were estimated using Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES). Chromium (Cr), zinc (Zn), lead (Pb), cadmium (Cd), nickel (Ni), manganese (Mn) and iron (Fe) are the seven toxic trace metals quantified from the measured PM₁₀ concentrations. The 24 h average concentrations of Cr, Zn, Pb, Cd, Ni, Mn and Fe from ninety PM₁₀ particulate samples of Kolkata were found to be 6.9, 506.1, 79.1, 3.3, 7.4, 2.4 and 103.6 ng/m³, respectively. The 24 h average PM₁₀ concentration exceeded national ambient air quality standard (NAAQS) as specified by central pollution control board, India at both residential (Kasba) and industrial (Cossipore) areas with mean concentration of 140.1 and 196.6 μg/m³, respectively. A simultaneous meteorology study was performed to assess the influence of air masses by wind speed, wind direction, rainfall, relative humidity and temperature. The measured toxic trace metals generally showed inverse relationship with wind speed, relative humidity and temperature. Factor analysis, a receptor modeling technique has been used for identification of the possible sources contributing to the PM₁₀. Varimax rotated factor analysis identified four possible sources of measured trace metals comprising solid waste dumping, vehicular traffic with the influence of road dust, road dust and soil dust at residential site (Kasba), while vehicular traffic with the influence of soil dust, road dust, galvanizing and electroplating industry, and tanning industry at industrial site (Cossipore).     

Water Quality during Development and Apportionment of Pollution from Rivers in Tapeng Lagoon, Taiwan

This work investigated water samples collected from Tapeng Lagoon, Taiwan. Factor analysis was conducted to explain the characteristics and the variation in the quality of water during the disassembly of oyster frames and fishery boxes. The result shows that the most important latent factors in Tapeng Lagoon are the ocean factor, primary productivity factor, and the fishery pollution factor. Canonical discriminant analysis is applied to identify the source of pollution in neighboring rivers outside Tapeng Lagoon. The two constructed discriminant functions (CDFs) showed markedly contribution to all discriminant variables, and that total nitrogen, algae, dissolved oxygen and total phosphate, combined in the nutrient effect factor. The recognition capacities in these two CDFs were 95.6%, 4.4%, respectively. The water quality in the Kaoping river most strongly determined that in the Tapeng Lagoon the best is. And disassembling the oyster frames and fishery boxes improves the water quality markedly. However, environmental topographic conditions indicate that strengthening stream pollution prevention and to constructing another entrance to the ocean are the best approaches for improving the quality of water in Tapeng Lagoon, especially by reducing eutrophication. These approaches and results yield useful information concerning habitat recovery and water resource management.     

乌鲁木齐市采暖季空气质量变化趋势分析

为了定量评价乌鲁木齐市采暖季空气污染近五年的治理成效,给环境治理决策提供科学依据,运用回归分析方法,对乌鲁木齐市采暖季空气质量的浓度、级别和变化规律进行回归分析。分析结果表明,PM10、SO2、NO2三项污染物的浓度都有所下降,空气质量级别的污染天数呈现明显的月变化规律。乌鲁木齐市采暖季空气的重污染状况有所遏制,但SO2污染凸现,在下一步的治理工作中,加强尘污染治理的同时要加大对SO2的治理力度。     

The Metallic Composition of Aerosols at Three Monitoring Sites in Korea During Winter 2002

In the present study, the distribution patterns of various metals were analyzed and compared using PM samples collected concurrently from three monitoring sites located in Korea (Seoul, Busan, and Jeju island) in December 2002. As these sites can represent metal pollution with different degrees of anthropogenic activities, their concentration levels were distinguished in a systematic manner in the order of Jeju, Busan, and Seoul. By comparing the present data sets with those measured previously from other locations in Korea and around the world, we attempted to diagnose the general status of elemental pollution on the Korean peninsula. Through an application of different statistical approaches, the major processes controlling elemental levels were assessed for each of the three study sites. The results indicated the importance of both crustal and anthropogenic sources in all sites with their relative roles varying significantly from each other. The results of the metal analysis data, when examined in relation to back trajectory analysis, confirmed that their concentration changes are affected quite sensitively with air mass movement patterns. The overall results of this study consistently indicated the contribution of a strong anthropogenic source area (e.g., China) to the observed metal concentration levels in the study area, but the strengths of such signals vary considerably across the Korean peninsula.     

Validation of the Polish version of the World Health Organization Disability Assessment Schedule (WHODAS 2.0) in an elderly population (60–70 years old)

Purpose. To assess the reliability and validity of the Polish version of the 36-point World Health Organization Disability Assessment Schedule (WHODAS 2.0) in an elderly population. Method. One thousand randomly selected individuals, aged 60–70 years, living in south-eastern Poland were assessed using the Polish version of the WHODAS 2.0. Results. The analysis confirmed the high reliability and validity of the tool. Cronbach’s α index was 0.89. The tool had high stability, and the correlation between test and retest results was high. The relevance of the domain selection was high or very high. A factor analysis confirmed the relevance of assigning questions to domains. High theoretical relevance was also demonstrated. Statistically significant differences between those who were and were not suffering from health problems were observed. An analysis of the internal structure of the WHODAS 2.0 revealed strong correlations between the components of each domain and the final result. Conclusion. The Polish version of the WHODAS 2.0 showed high reliability and validity; thus, it can be used to assess health, functioning and disability in the elderly population of Poland.     

Safe speed limits for a safe system: The relationship between speed limit and fatal crash rate for different crash types

Objective: The objective of this article is to provide empirical evidence for safe speed limits that will meet the objectives of the Safe System by examining the relationship between speed limit and injury severity for different crash types, using police-reported crash data.

Method: Police-reported crashes from 2 Australian jurisdictions were used to calculate a fatal crash rate by speed limit and crash type. Example safe speed limits were defined using threshold risk levels.

Results: A positive exponential relationship between speed limit and fatality rate was found. For an example fatality rate threshold of 1 in 100 crashes it was found that safe speed limits are 40 km/h for pedestrian crashes; 50 km/h for head-on crashes; 60 km/h for hit fixed object crashes; 80 km/h for right angle, right turn, and left road/rollover crashes; and 110 km/h or more for rear-end crashes.

Conclusions: The positive exponential relationship between speed limit and fatal crash rate is consistent with prior research into speed and crash risk. The results indicate that speed zones of 100 km/h or more only meet the objectives of the Safe System, with regard to fatal crashes, where all crash types except rear-end crashes are exceedingly rare, such as on a high standard restricted access highway with a safe roadside design.     

Field effectiveness evaluation of advanced driver assistance systems

Abstract

Objective: Advanced driver assistance systems (ADAS) are a class of vehicle technologies designed to increase safety by providing drivers with timely warnings and autonomously intervening to avoid hazardous situations. Though laboratory testing suggests that ADAS technologies will greatly impact crash involvement rates, real-world evidence that characterizes their effectiveness is still limited. This study evaluates and quantifies the association of ADAS technologies with the likelihood of a moderate or severe crash for new-model BMWs in the United States.

Methods: Vehicle ADAS option information for the cohort of model year 2014 and later BMW passenger vehicles sold after January 1, 2014 (n?=?1,063,503), was coded using VIN-identified options data. ADAS technologies of interest include frontal collision warning with autonomous emergency braking, lane departure warning, and blind spot detection. BMW Automated Crash Notification system data (from January 2014 to November 2017) were merged with vehicle data by VIN to identify crashed vehicles (n?=?15,507), including date, crash severity (delta V), and area of impact. Using Cox proportional hazards regression modeling, the study calculates the adjusted hazard ratio for crashing among BMW passenger vehicles with versus without ADAS technologies. The adjusted percentage reduction in moderate and severe crashes associated with ADAS is interpreted as one minus the hazard ratio.

Results: Vehicles equipped with both autonomous emergency braking and lane departure warning were 23% less likely to crash than those not equipped (hazard ratio [HR]?=?0.77; 95% confidence interval [CI], 0.73–0.81), controlling for model year, vehicle size and body type. Autonomous emergency braking and lane departure warning generally occur together, making it difficult to tease apart their individual effects. Blind spot detection was associated with a 14% reduction in crashes after controlling for the presence of autonomous emergency braking and lane departure warning (HR =0.86; 95% CI, 0.744–0.99). Differences were observed by vehicle type and crash type. The combined effect of autonomous emergency braking and lane departure warning was greater in newer model vehicles: Equipped vehicles were 13% less likely to crash (HR =0.87; 95% CI, 0.79–0.95) among 2014 model year vehicles versus 34% less likely to crash (HR =0.66; 95% CI, 0.57–0.77) among 2017 model year vehicles.

Conclusion: This robust cohort study contributes to the growing evidence on the effectiveness of ADAS technologies.     

供水管网震后流量监测点的动态分级优化布局研究

为了提高管网地震监测点布局的准确性和合理性,基于管网微观水力计算模型和动态分级法,提出供水管网震后流量监测点的动态分级优化布局模型。首先,利用管网微观水力计算模型计算管段流量的影响系数,构建管段的影响系数矩阵,并利用信息熵确定管段权重;其次,标准化处理影响系数矩阵,通过聚类迭代提出供水管网地震流量监测点优化布局的动态分级方法,对供水管网震后流量监测点进行优化布置分级评定;最后,根据工程实例进行方法实践,结果表明:供水管网中的管线分类较为科学合理,地震监测点在供水管网上分布也比较均匀,而且该模型在一定程度上消除了人为因素的影响,保障了震时管网的监控效果和日常建设的合理性。     

不同类型压力对飞行员安全绩效的影响规律研究

为探究各类型压力对飞行员安全绩效的影响规律,为飞行员日常工作管理提供依据,选取某航空公司200名飞行员进行压力测试,并调取其近6 a的飞机品质(QAR)数据,通过相关性分析和线性回归分析将飞行员压力数据与其QAR数据进行对比分析,探究飞行员压力对飞行安全绩效的影响规律。研究结果表明:工作负荷压力、家庭压力、人际关系压力和组织管理压力会显著负向影响飞行员安全绩效;角色压力和专业发展压力会显著正向影响飞行员安全绩效。     

不同煤层煤氧化自燃性实验分析

为研究不同煤层煤自然发火特征的异同性及规律,以淮南矿区1号、3号、6号、13号煤层为研究对象,通过自然发火实验,对不同煤层煤的自然发火期周期、煤样70℃时放热强度和R70值进行分析。研究结果表明:4个不同煤层煤样自燃性由强到弱依次为:3煤>6煤>1煤>13煤;变质程度相近的4个煤层,3煤自然发火期最短,这与煤体中硫分和水分含量高有关;13煤变质程度较高,且前期放热强度、耗氧速率增长缓慢,其自燃性较弱;4个不同煤层煤的耗氧速率、CO,CO2产生率,以及C2H4/C2H6值随煤温升高具有相似的变化规律;煤中CH4气体大量解吸出现于煤温60℃之前,煤中灰分在80~120℃开始逐渐吸热融化,解析和融化均会抑制煤氧接触并且减小煤氧反应放热总量。