北京东南化工区土壤有机氯农药污染特征和分布规律

采集北京原东南化工区表层土壤样品,测定了土壤有机氯农药(滴滴涕、六六六和六氯苯)残留浓度,结果表明化工区土壤有机氯农药浓度较高,滴滴涕和六六六平均浓度高达5470ng/g和2110ng/g,比一般农业和城市土壤中的浓度高出很多;某些点位甚至超过国家土壤三级标准,高浓度的点位主要集中在原农药厂的生产车间和存储点。六氯苯由于来源和挥发性跟滴滴涕和六六六不同,所以六氯苯残留在化工区土壤中的分布相对比较均匀。化工区土壤滴滴涕和六六六的异构体组成特征表明工业区土壤的有机氯农药降解速度较慢,滴滴涕残留来源于工业滴滴涕和三氯杀螨醇,而六六六主要来源于工业六六六。化工区的有机氯农药污染主要来自于原农药厂的生产和存储,重污染点位对周围化工厂的有机氯残留有一定的影响。由于高残留浓度和较低的降解速度,化工区土壤有机氯农药残留的环境风险值得进一步关注。     

煤炭非燃料利用与洁净煤技术

煤炭是中国的主要能源和资源，也是主要的污染源。煤炭燃料利用的不洁净使得其能源主导地位受到石油、天然气和新能源越来越大的挑战。寻求合理、高效、洁净的煤炭非燃料利用新途径应当成为煤化工发展的重要方向。本文在分析了煤炭燃料利用存在问题和前景的基础上，强调煤炭非燃料利用应当成为洁净煤技术的一种主要形式，并指出煤炭非燃料利用的合理途径。     

重铬酸钾法测定化学需氧量的几点体会

重铬酸钾法是测定工业废水中化学需氧量的国家标准方法，通过大量的实验对CODCr的实验进行探索，提出几点体会，在CODCr的测定中有一定的实用性。     

Soil properties and crop productivity as influenced by flyash incorporation in soil

Field experiments were carried out during 1996–97at Gulawathi, Muthiani and Salarpur Villages, IARI Farm, NewDelhi and NCPP Campus, Dadri to evaluate changes in soilcharacteristics and growth of wheat (Triticum aestivum L.),mustard (Brassica juncea L.), lentil (Lence esculentaMoench.), rice (Oryza sativa L.) and maize (Zea mays L.) byvarying amounts of flyash addition (up to 50t ha^-1) in soils atsowing/transplanting time of crops. Flyash addition in areasadjoining NCPP Thermal Power Plant, Dadri, Ghaziabad, U.P.ranged from 5–12 t ha^-1 yr^-1 in 1995–96. Shoot and root growthand yield of test crops at different locations after flyashincorporation resulted in beneficial effects of flyashaddition in most cases. The silt dominant texture of flyashimproved loamy sand to sandy loam textures of the surfacesoils at the farmers' fields. The increased growth in yield ofcrops with flyash incorporation was possibly due tomodifications in soil moisture retention and transmissioncharacteristics, bulk density, physico-chemical characterssuch as pH and EC and organic carbon content. The response offlyash addition in the soil on soil health and cropproductivity needs to be evaluated on long-term sustainableaspects.     

采油废水处理方法与技术研究进展

采油废水具有成分复杂、可生化性差、含盐量高等特点,直接排放可对环境造成严重影响。对近年来国内外采油废水的特点和处理技术方法研究进展进行了综述,分析各类处理方法的特点,并提出了今后研究方向。     

微波消解-分光光度法测定COD的研究

通过试验研究,提出了测定COD的新方法——微波消解-分光光度法。该方法准确度、精密度符合分析要求,与国标中回流法的测定结果没有显著差异。而且采用该方法测定COD可克服回流法、微波消解-滴定法及HACH-COD测定法的操作复杂、耗时长等缺点。     

从废水中回收磷的主要方法和常见工艺

磷污染是引起水体富营养化的重要原因,磷资源紧缺是我们即将面对的事实,同时解决这两方面问题的办法就是必须从含磷废水中回收磷。文章叙述从废水中回收磷的主要方法和原理,并介绍常见工艺流程。     

皂素工业废水CODCr排放限值的研究

皂素工业是近几年来迅速发展的一个重要生物医药化工行业,我国皂素主产区位于南水北调中线工程水源汉江上游,其排放的大量高浓度含酸有机废水给水源保护带来严重威胁,急需制定我国的皂素工业水污染物排放标准.采用三段式两相厌氧为核心的二级生化组合工艺技术从实验室试验、现场工业性试验和示范工程三方面对皂素工业废水COD_Cr排放限值进行了研究,皂素废水二级生化处理出水中残留COD_Cr总量(以质量浓度计)约为400～500 mg/L,其中溶解性微生物代谢产物(SMP)质量浓度约为240～280 mg/L.综合考虑技术可达性和经济可行性,将现有企业COD_Cr排放限值规定为400 mg/L;为引导企业对废液综合利用,推进皂素行业清洁生产,规定新建企业和现有企业的第二时段的限值为300 mg/L.提出了丹江库区相应的COD_Cr总量指标及皂素规模限额.执行该标准后,全国每年可削减COD_Cr 71　400 t,其中南水北调中线工程水源汉江上游至少可削减60　690 t,可以满足中线调水水源区的环境保护要求.      

固体和液体危险化学品仓库火灾风险分析方法探讨

固体和液体化学品仓库火灾是企业安全面临的经常性威胁之一,需考虑火灾中毒性燃烧产物释放和非燃烧产生的毒性物质释放。结合火灾风险分析方法,阐述火灾场景中各要素及相互关系,主要包括火灾场景、物质、燃烧速率、源项、毒性、扩散、概率和风险之间的关系,火灾场景考虑持续时间、面积和通风率的影响,物质中考虑平均结构式和燃烧方程,源项中考虑形成的产物、燃烧物质每千克的散发和活性物质百分比,毒性中考虑HCl,NO2,SO2和非燃烧产生的物质。基于储存物质平均结构式,建立燃烧关系方程。燃烧速率计算取决于可用的氧气量和需要的氧气量,分为面积受限的燃烧速率和氧气受限的燃烧速率。最后给出毒性燃烧产物HCl,NO2,SO2释放量和非燃烧产生的毒性物质释放量的计算方法,同时以毒性燃烧产物释放场景后果模拟为例说明仓库发生火灾的后果严重性,为仓库火灾风险分析提供借鉴。     

Modelling spills of water-reactive chemicals

This paper describes part of a programme of work undertaken at the Health and Safety Laboratory (HSL) to investigate the behaviour of selected water-reactive chemicals. Following an accidental release, such substances react exothermically with any water present, generating acidic vapours. The STAWaRS (Source Term Assessment of Water Reactive Substances) software was developed for the Health and Safety Executive (HSE) by ESR Technology to model this complex process. The aims of the study described here were to provide experimental validation of the heats of hydrolysis used within STAWaRS, and to perform sensitivity studies on selected STAWaRS input parameters.The heat of hydrolysis of acetyl chloride was measured and showed good correlation with the value used within STAWaRS. Some of the variables that influence the severity of acetyl chloride spills are examined, with reference to predictions made by the STAWaRS model. The heats of hydrolysis of titanium tetrachloride previously measured at HSL are also discussed, and the effect of adopting these experimentally derived values for modelling spills is shown for a hypothetical land use planning case. This study demonstrates the importance of using experimentally validated values for STAWaRS input parameters.