Warm forming die design,Part II: Parting surface temperature response characterization of a novel thermal finite element modeling code

The majority of the research activities in the area of warm forming are concentrated on demonstrating or simulating the improved formability associated with forming lightweight materials such as aluminum alloys at elevated temperatures. However, the ability to design the proper thermal management system within the forming tool is a critical aspect to delivering this technology as a viable, stable production alternative to traditional stamping. This work begins to address the thermal stability issues of this process by examining the impact of process cycle time on the parting surface temperature response. Cycle times of 10, 15, 30, and 300 s were evaluated using a reciprocating surface and a self-heated experimental block of 1020 steel fitted with resistance cartridge heaters. The presented results indicate that cycle time does not significantly impact the steady-state temperature response at the parting surface for a well-insulated die that has proper thermal management. Parting surface experimental results were compared to values obtained numerically and through the use of the novel thermal finite element analysis software PASSAGE/Forming^®.     

时间因素对钻屑瓦斯解吸指标K1值测定的影响分析

针对时间因素对钻屑瓦斯解吸指标K1测定结果的影响,采用恒温瓦斯放散试验深入分析钻屑瓦斯解吸指标K1测定理论的准确性,总结因时间因素导致K1值测定误差所带来的现场问题。研究结果表明:K1值的测定误差与时间关系密切,测定启动时间越晚,误差越大;测定启动时间由第1 min延后至第2 min,绝对误差和相对误差最大值分别增加0.081 cm3/(g·min1/2)和2.20%;高瓦斯压力条件矿井或煤层的局部高瓦斯压力区域、构造煤发育区的钻屑瓦斯解吸指标K1值测定结果偏低,测定误差偏大。研究结果可为煤与瓦斯突出预测水平的提升提供技术支撑。     

Point Sampling Digital Imagery with ‘Samplepoint’

Measuring percent occurrence of objects from digital images can save time and expense relative to conventional field measurements. However, the accuracy of image analysis had, until now, not reached the level of the best conventional field measurements. Additionally, most image-analysis software programs require advanced user training to successfully analyze images. Here we present a new software program, ‘SamplePoint,’ that provides the user a single-pixel sample point and the ability to view and identify the pixel context. We found SamplePoint to allow accuracy comparable with the most accurate field-methods for ground-cover measurements. Expert use of the program requires minimal training and its ease of use allows rapid measurements from image data. We recommend SamplePoint for calibrating the threshold-detection level of image-analysis software or for making direct measurements of percent occurrence from digital images.     

Monitoring Biofilm Thickness Using A Non-Destructive, On-Line, Electrical Capacitance Technique

Abstact The present study was designed to evaluate indirect, non-invasive, on-line measurement of biofilm thickness using an electrical capacitance technique. Several assays were carried out and the results showed that, at a frequency of 1 kHz, electrical capacitance could be used to measure biofilm thickness indirectly (with a correlation coefficient of 0.9495). The reproducibility revealed by the assays was also highly satisfactory.However, in contrast to what was expected, there was an inverse relationship between electrical capacitance and biofilm thickness, i.e. electrical capacitance diminished with the increase in the biofilm thickness.The tests were also carried out at different frequencies (1 kHz, 10 kHz and 100 kHz)     

卫星光学反射膜光谱反射率空间综合环境退化研究

对玻璃基底和金属基底的铝反射膜在紫外、低能电子、低能质子的综合环境作用下的光谱反射率退化进行了实验研究。试验结果表明两种铝反射膜的光谱反射率均发生了退化,且光谱反射率的退化主要集中在可见光波段,在近红外波段退化很小;玻璃基底铝反射膜退化在420 nm左右出现峰值点,2种金属基底铝反射膜的退化的峰值点在450 nm左右。由于电荷沉积在玻璃中后会抑制带电粒子入射,因此玻璃基底铝反射膜的退化要小于金属基底铝反射膜。     

街道峡谷内汽车排放污染物浓度分布的观测与数值模拟

在上海某典型街道峡谷内按一定的空间布点,在一定时段内同时对各布点进行采样并做一氧化碳浓度分析,同时记录车辆种类、车流量、气象条件等,分析街道峡谷内污染物浓度的分布.运用风向频率加权(WDFW)方法,结合大气流动和污染物扩散的CFD模型进行数值模拟计算.结果表明,数值模拟结果和现场观测结果较吻合,建筑物低的一侧污染物浓度远高于建筑物高的一侧污染物浓度,两侧的污染物浓度随着高度的增加而降低.     

有无隔膜槽中成对电解脱色活性艳蓝性能比较

分别采用有/无隔膜电解槽,以活性炭纤维(ACF)为阳极和阴极,研究了不同电流密度下蒽醌染料活性艳蓝KN-R的电化学脱色。在染料脱除量、电耗、脱除当量等方面比较了两种电解槽的脱色性能。结果表明,1.0～1.5 mA/cm2时,两种电解槽中均发生阳极电氧化和阴极电还原同时进行的成对电解脱色,无隔膜槽脱色性能优于隔膜槽。     

论中国环境预警制度的法治化--以行政权力的规制为核心

环境预警制度蕴含了一项使行政权力合法扩张的"对应性架构",即预警级别与"强制型"或"限制型"措施之间的充分必要关系。在制度运行过程当中,环境行政权力却出现了"选择性失语"和"运动式肆意"的问题,具体表现为:一是预警级别发布时的"隐匿"与"从轻",从而对公民健康权益保护不足;二是预警状态下环境行政权力的扩张过度,使得对个人自由与企业经济自由侵害过度。由于环境治理领域"被害人-加害人"二元对立关系的模糊化、趋同化甚至同一化,传统公法学体系中的权力制约理论无法对预警状态下多样化和多层次性的行政权力进行有效地规制。那么,便有必要对现有的环境预警制度进行修正与纠偏。因此,可以从"对应性架构"的载体及其前后两端入手,对环境预警制度进行法治化建构。具体而言,对环境预警的载体"应急预案"进行形式改造,提高环境应急预案的规范层级,完善环境应急预案制定、修改等程序性规定;明确不同预警级别设定的规范层级,将作为被宪法所保护的客观利益——生态环境利益与经济利益的边界——通过"前端"预警标准予以划分;对预警状态下行政权力的"外部"制约程序予以完善。基于预警级别标准体系的划分,可以通过司法程序对"后端"环境应急预案进行"附带性审查",同时,赋予私主体直接针对预警状态下具有"外化"法效力的内部行政行为提起行政诉讼的诉权。     

区域城市化水平的综合测度研究--以江苏省为例

城市化是社会、经济、文化等多种因素综合发展的过程,是一个多维概念,而目前城市化水平常用的单一评价指标只能从某个方面反映一个地区的城市化水平,不能全面、科学地反映城市化的丰富内涵。以江苏省13个地级市为例,通过经济、空间、人口以及生活方式、生活质量等体现城市化内涵的四个方面构造城市化水平评价指标体系,应用多指标综合评价方法对13市的城市化水平进行综合评价研究。结果表明,江苏省城市化水平大致分为5个层次,南京、无锡和苏州城市化水平最高,常州和镇江居第二层次,扬州、南通和泰州属第三层次,徐州、盐城和连云港列第四层次,淮安和宿迁最低,城市化水平区域差异明显,从南向北,城市化水平呈梯度下降趋势;从东向西,城市化水平在某种程度上也呈下降趋势。     

智能家电的低待机功耗研究

从智能家电待机工作状态入手,分析电器产品中参与待机工作的各部分电路原理,提出降低潜在功耗设计思路和计算方法,从家电设计研发阶段对待机功耗进行控制,同时对待机功耗精确测量方法关键点进行解读以控制低功耗测试不确定度,有助于低待机功耗设计和测量的标准化和规范化。