浅谈在用工业管道的壁厚测定

某企业的在用压力管道发生爆裂事故,经事故调查组现场调查分析主要原因是管道壁厚减薄,承受不了内部正常工作压力所致.本文根据分析结果,提出了开展日常在线定点测厚、年度检查测厚和定期检验测厚的处理措施,预防此类事故的再次发生.     

用示踪气体稀释法测量房间换气速度

本文介绍了用示踪气体稀释法监测大亚湾核电站附近六类居室换气速度的实验。本法用SF_6作示踪气,气相色谱分析浓度,以示踪气体浓度下降和时间关系,求出换气次数和换气速度。结果表明,六类民房换气速度都较大,换气次数取值老式民房为1.0h~(-1)和2.8h~(-1);新式民房为2.5h~(-1);单身集体宿舍为0.60h~(-1);职工公寓为1.9h~(-1);招待所房间为0.96h~(-1)。     

Health implication among occupational exposed workers in a chromium alloy factory, Thailand

IntroductionNationalStatisticalOffice ,Thailand (NSO ,2 0 0 0 )reportedthattheneedformetalmanufacturingindustriesandassociatedproductionsectorhasincreasedatanextremelyrapidrate ,especiallyinthecentralpartofThailand .Itisestimatedthattherearemorethan 10 0 …     

Benzene and lead exposure assessment among occupational bus drivers in Bangkok traffic

IntroductionAirpollutionproblemsasaresultoffastgrowthinthetotalnumberofvehiclesinurbancitiesareontheincrease .PreliminaryepidemiologicalexposureassessmentsuggestthatthedetrimentaleffectofairpollutiongeneratedbyvehiculartrafficindevelopingcitieslikeBangkok…     

点火延迟时间对粉尘最大爆炸压力测定影响的研究

根据粉尘云形成时颗粒分散及沉降的时间效应,指出目前国际通行的球型爆炸装置采用固定点火延迟时间测定粉尘最大爆炸压力的方法具有不确定性,并以煤粉为介质在20 L标准爆炸球装置上进行系列爆炸实验,研究装置点火延迟时间对粉尘爆炸压力的影响。结果表明:点火延迟时间对粉尘爆炸压力测定有十分显著的影响,不同粒径粉尘的最大爆炸压力有不同点火延迟时间,目前仅以气相湍流度所确定的固定点火延迟时间下,所测粉尘最大爆炸压力可能严重偏离实际。     

Validation of the driver ecological glare test

IntroductionThe present study proposes to validate the Driver Ecological Glare Test (DEGT), a test developed to measure the benefit of a headlight glare Advanced Driver Assistance System (ADAS), by comparing it to a laboratory glare test. Method: Twenty-four participants, aged from 55 to 70 years, were recruited to complete a visual examination, including monocular halo size measurement for both eyes using Vision Monitor device (MonCv3; Metrovision). An on-field evaluation took place at night at the UTAC CERAM test track to obtain disability glare measures using the DEGT. Results: A significant correlation was found between the two glare tests and Bland-Altman analysis reveals a good agreement with a bias of 73.7 arcmin between the halo size measurements obtained from the DEGT and Vision Monitor. The results of the present study demonstrate that the DEGT is a valid method to test halo size and is adapted to evaluate the benefits of an antiglare device for drivers in an ecological situation.     

How have we,do we,and will we measure time perspective? A review of methodological and measurement issues

Despite the demonstrated importance of time perspective on key outcomes, its growing popularity, and its wide reach in terms of samples and disciplines, the construct has been plagued with definitional and measurement problems since its inception. Given the historical and current confusion regarding both conceptualization and operationalization, the purpose of this article is to provide an overview of methodological and measurement issues related to time perspective. Clearly, definitional and measurement clarity are critical for the success of future research. Through integrating the fragmented and eclectic time perspective literature fraught with ambiguity, we help to clarify measurement options and their psychometric evidence for future researchers. Specifically, we provide an in-depth comparison of four (and their offshoots) commonly used, scale-based measures of time perspective with respect to their dimensional content, psychometric properties, and validation evidence. We end with recommendations for time perspective research.     

基于Matlab的短路熔痕凝固过程中熔体温度测算方法*

为解决无法对瞬时凝固的熔痕高温熔体进行测温,从而致使火灾物证鉴定界对短路熔痕组织形成规律无法达成共识的问题,使用高速摄像机采集熔痕形成时熔体的彩色影像,运用Matlab图像色温识别技术,对熔体凝固时的色彩变化进行识别与分析,从而建立测算短路熔痕凝固速率的方法。结果表明:该方法的平均标准差为9.63,标准不确定度为2.55 K,计算结果满足测试要求;在测算的10个熔痕中,灭弧瞬间熔体温度为1 734.03~2 759.15 K,初始冷却速率为-255.16~-86.61 K/ms,凝固时长为46.45~87.99 ms;灭弧时熔体温度与初始冷却速率呈近似正相关关系,与熔痕体积无关。通过此方法测算短路发生时高温熔体的温度变化,可为研究短路故障迸溅熔痕引燃、熔痕组织变化规律提供方法支持。     

NaI（Tl）多道谱仪测量固体样品时实验数据准确性分析

通过对同一样品中的放射性核素含量进行多次等精度测量,对结果的可靠性进行分析和出现离散的数据进行数据舍弃检验。在放射性测量过程中除考虑统计误差外,同时也应考虑仪器的、人为的及偶然因素导致的系统误差,从而提高测量精度。     

Feasibility of On-line Measurement of Sewage Components Using the UV Absorbance and the Neural Network

The objective of this study was to test the feasibility of a new method to improve the accuracy in the estimation of sewage components. Adding to the regression of sewage components with UV (ultraviolet) absorbance values, a proposed method considered an unclear but existing relationship among characteristic of sewage production. Sewage production showed very defined profiles due to the daily human activities. So the main idea was the combination of measuring the UV absorbance values and analyzing the characteristics of the sewage production. For this purpose, 446 sewage samples taken at every 2-h interval for 51 days at a wastewater treatment plant were statistically analyzed using neural network (NN). NN was trained with 350 data sets (about 29 days) of UV absorbance values, flow rate and time. And as a result, it could predict 96 data (12 days) as a validation, indicating that estimation accuracies were improved to higher level than those of the linear regressions. The proposed method could estimate concentrations of total nitrogen (TN) and total phosphate (TP) within practical accuracies as well as total suspended solid.