废旧电脑主板元器件拆卸技术概述

拆卸废旧电脑主板上的元器件是废旧电脑板卡资源化的一个重要工序。介绍了电脑主板的组成及元器件贴装技术，分析了国内外电路板元器件拆卸技术的发展，并对研究高效无损的元器件拆卸技术提出了建议。     

The Merseyside Accident Information Model (MAIM) can reveal components of accidents that lead to attendance at fracture clinics and cause disability: a new approach to accident prevention

The objectives of this study were to identify components of accidents that cause the most disability and to discover the principal sources of injuries treated in the fracture clinics. Patients attending fracture clinics of the Royal Liverpool University Hospital were interviewed using a portable computer-based questionnaire, the Merseyside Accident Information Model (MAIM). Patients were followed up by telephone interview or letter to enquire about disability continuing after discharge. Disability was measured by the pre-accident to post-discharge changes in scores for 11 normal functions. Of the 1326 patients interviewed, 900 (68%) were successfully followed up and 37% reported disability after discharge. First events ‘tripping’, ‘slipping’ and ‘other underfoot events’ accounted for 433 patients (194 reporting disability), and ‘collapsed/fainted — no other event' for 66 patients (27 reporting disability). Activities at the time of accident most frequently associated with disability involved moving about on foot. Among first event objects, ground surfaces and underfoot hazards were reported in 35%. Sources of injuries included underfoot accidents (48%), sport (13%), and transport accidents (12%.). Underfoot accidents contributed to 58% of patients reporting disability, sport 6% and transport accidents 11%. Underfoot accidents together with ‘collapsed/fainted — no other event’ accounted for 79% of female patients reporting disability and 50% of men. Such data could be used for cost-effective targeting of preventative measures, and to study the effectiveness of accident prevention initiatives.     

State-of-the-art of ecological modelling with emphasis on development of structural dynamic models

The paper deals with two major problems in ecological modelling today, namely how to get reliable parameters? and how to build ecosystem properties into our models? The use of new mathematical tools to answer these questions is mentioned briefly, but the main focus of the paper is on development of structural dynamic models which are models using goal functions to reflect a current change of the properties of the biological components in the models. These changes of the properties are due to the enormous adaptability of the biological components to the prevailing conditions. All species in an ecosystem attempt to obtain most biomass, i.e. to move as far away as possible from thermodynamic equilibrium which can be measured by the thermodynamic concept exergy. Consequently, exergy has been proposed as a goal function in ecological models with dynamic structure, meaning currently changed properties of the biological components and in model language currently changed parameters. An equation to compute an exergy index of a model is presented. The theoretical considerations leading to this equation are not presented here but references to literature where the basis theory can be found are given. Two case studies of structural dynamic modelling are presented: a shallow lake where the structural dynamic changes have been determined before the model was developed, and the application of biomanipulation in lake management, where the structural dynamic changes are generally known. Moreover. it is also discussed how the same idea of using exergy as a goal function in ecological modelling may be applied to facilitate the estimation of parameters.     

丹东市区酸雨状况综述

通过对丹东市区降水时间及空间变化趋势的分析,总结酸雨污染现状,找出丹东市区酸雨变化特征。     

生物破乳菌XH-1的破乳有效成分研究

对破乳菌XH-1（Bacillus mojavensis）的破乳效能进行研究,并对该菌所产生的破乳剂有效成分及其理化性质进行考察。结果表明,破乳菌XH-1全培养液针对O／w型模型乳状液24h破乳率为86．0％,48h破乳率可达100％;XH-1菌的破乳有效成分为胞外分泌物质,该物质耐低温、不耐高温、经胃蛋白酶、胰蛋白酶及尿素处理后其基本失活;采用不同蛋白质粗体方法对破乳活性物质进行处理,发现粗提产物均具有较好的破乳功能,说明该物质具有蛋白质的特性;经可见-紫外分光光度法扫描及红外光谱扫描分析发现该生物破乳剂的有效成分为破乳菌株XH-1发酵产生的胞外蛋白类物质。     

废弃电子元器件酸性浸出液中铜的萃取研究

利用国产新型铜萃取剂DZ988,以PEG-NO2/H2SO4混酸溶液氧化浸取废弃电子元器件得到的酸浸液为萃取原液(含铜浓度CCu=3.132 g/L),进行铜的萃取研究,考察各因素对铜的萃取及反萃取的影响。试验结果表明,铜的萃取率随萃取剂浓度、O/A比、萃取温度及pH的提高而提高;在萃取剂浓度设定为25%,萃取料液浓度用氨水调至pH=2,油水比O/A=1:1,常温的条件下,对废弃电子元器件的PEG-NO2/H2SO4混酸浸出液中的铜的萃取率可达99.45%,铜、铁分离系数达1 151;以硫酸作反萃剂,对负载铜的萃取剂进行反萃取研究,在硫酸溶液浓度为250 g/L,相比O/A=1:1时,铜的反萃率接近100%。同时,DZ988基本不萃取Co、Ni,后续可从铜萃余液中继续回收Co、Ni。     

活性污泥胞外聚合物(EPS)的分层组分及其理化性质的变化特征研究

针对活性污泥的胞外聚合物(EPS),采用阳离子交换树脂(CER)法和离心/超声波法对总EPS和分层EPS(由外至内依次为slime,LB-EPS,TB-EPS)分别进行提取,测定EPS中多糖(PS)、蛋白质(PN)和DNA的含量,并对各EPS溶液的理化特性随溶液条件的变化特征进行了探讨.结果表明,EPS的化学组分(PS、PN和DNA)在TB-EPS层中含量最高,其亲水性组分的含量高于疏水性组分,但PN的疏水比高于PS.各层EPS中PS/PN的值对其Zeta电位和等电点有重要的影响.其中,PS/PN越高,各层EPS的Zeta电位越小,分层EPS的等电点越高.各种EPS溶液pH的增加导致其Zeta电位基本呈下降趋势,对应的等电点分别为pH总EPS=2.9、pHslime=2.2、pHLB-EPS=2.3、pHTB-EPS=1.3.离子强度的增加可以导致EPS溶液的电导率呈直线上升,对应的Zeta电位却迅速增加然后趋于稳定,但并未出现电位逆转现象.此外,升高温度(<40℃)可以降低各种EPS溶液的表观黏度,并在40～60℃之间时逐渐趋于稳定.     

Development pattern and enhancing system of automotive components remanufacturing industry in China

Along with the increasing number of automotive output and End-of-Life vehicles (ELVs) in China, resources shortage and environmental pollution are aggravating, so the tremendous need to reuse automotive components gives birth to the industry. The Chinese government becomes to realize that it is necessary to build a conservation-oriented and environment-friendly harmonious society. As the ultimate form of recycling, remanufacturing will be an effective method to promote the development of Chinese circular economy. The automotive remanufacturing industry in China is just at the preliminary stage, this paper presents some problems before remanufacturing, during remanufacturing and after remanufacturing, and then it points out several barriers, such as restrictive policies and regulations, consumer acceptance, scarcity of technologies, etc. Like many other developed countries, Chinese remanufacturing industry will also experience the primary stage, growth stage and developed stage. while the emphasis of resources input will not be the same. By analyzing the resources input characteristics at different development stages, three development patterns, such as the Government Incenting Pattern, Technology Driving Pattern and Market Leading Pattern, are put forward. At present, the cooperation of the government, industry, universities and research institutes, etc, will jointly construct the enhancing system of automotive components remanufacturing industry in China. Finally, it concludes with a summary and some suggestions in the field.     

Climate, canopy conductance and leaf area development controls on evapotranspiration in a boreal coniferous forest over a 10-year period: A united model assessment

The aim of this work was to test a process-based model (hydrological model combined with forest growth model) on the simulation of seasonal variability of evapotranspiration (ET) in an even-aged boreal Scots pine (Pinus sylvestris L.) stand over a 10 year period (1999-2008). The water flux components (including canopy transpiration (E_t) and evaporation from canopy (E_c) and ground surface (E_g) were estimated in order to output the long-term stand water budget considering the interaction between climate variations and stand development. For validation, half-hourly data on eddy water vapor fluxes were measured during the 10 growing seasons (May-September). The model predicted well the seasonal course of ET compared to the measured values, but slightly underestimated the water fluxes both in non-drought and drought (2000, 2003 and 2006) years. The prediction accuracy was, on average, higher in drought years. The simulated ET over the 10 years explained, on average, 58% of the daily variations and 84% of the monthly amount of ET. Water amount from E_t contributed most to the ET, with the fractions of E_t, E_c and E_g being, on average, 67, 11 and 23% over the 10-year period, respectively. Regardless of weather conditions, the daily ET was strongly dependent on air temperature (T_a) and vapor pressure deficit (D_a), but less dependent on soil moisture (W_s). On cloudy and rainy days, there was a non-linear relationship between the ET and solar radiation (R_o). During drought years, the model predicted lower daily canopy stomatal conductance (g_cs) compared with non-drought years, leading to a lower level of E_t. The modeled daily g_cs responded well to D_a and W_s. In the model simulation, the annual LAI increased by 35% between 1999 and 2008. The ratio of E_c: ET correlated strongly with LAI. Furthermore, LAI reduced the proportion of E_g as a result of the increased share of E_c and E_t and radiation interception. Although the increase of LAI affected positively E_t, the contribution of E_t in ET was not significantly correlated with LAI. To conclude, although the model predicted reasonably well the seasonal course of ET, the calculation time steps of different processes in the model should be homogenized in the future to increase the prediction accuracy.     

电化学处理黄姜生化尾水研究

黄姜提取皂素过程中会产生大量废水,传统的生化方法难以去除这些废水中的难降解有机污染物.因此,本文以黄姜皂素生化尾水为研究对象,分别采用DSA+铁电极组合、不锈钢+铁电极组合、单独钛钌网电极(DSA)对其进行深度处理.结果表明,在原水CODCr为150mg.L-1,色度为200度,Cl-浓度为3338mg.L-1的情况下,不锈钢+铁电极组合、单独DSA电极处理后CODCr去除率分别为35%和43%,色度去除率分别为78.7%和84.6%.相较而言,DSA+铁电极组合在电流密度为95A.m-2、初始pH=7.28时处理30min后,CODCr和色度的去除率分别达到62%和99.5%.采用紫外光谱、三维荧光光谱和凝胶色谱对水质变化进行了详细分析.结果表明,水中难降解有机组分被降解矿化,生成分子量较小的脂肪酸.