Effects of soil nematodes communities on litter decomposition in urban forest of Dalian北大核心CSCD

In order to further expound the effect of soil nematodes on litter decomposition in urban forest, this study investigated the responses of soil nematodes communities to litter decomposition by litterbags technology at different mesh sizes in Dalian National Forest Park. Soil nematodes community composition, decomposition rate of litter and nutrient release were also analyzed. It found a total of 4 418 nematodes from 39 genera. Higher relative density of soil nematodes was found in the bags with 0.1 mm mesh size (1.55 individuals and 7.34 orders per g of dry litter) compared to the bags with 0.02 mm mesh size (0.21 individuals and 0.49 orders per g of dry litter). There were very few soil nematodes in the 0.02 mm litter bags. Thus we regarded that soil nematodes only affected the 0.1 mm litter bags. The mass loss rates as well as C and P release rates was higher in litter bags with 0.1 mm mesh size than in those with 0.02 mm mesh size, indicating a significant influence of soil nematodes on mass loss and nutrient release. The contribution of soil nematodes to the litter mass loss was about 24%. The effect of soil nematodes on the nutrient release rates differed among elements. The soil nematodes had a bigger influence on the release rate of N than that of other elements, whereas the influence on K release rate was the lowest. The results showed that soil nematodes communities has a significant effect on the litter decomposition and nutrient release of the forest litter in Dalian city, especially promoting the mass loss rates and N release rates.     

升温速率对医疗垃圾热解机理的影响

用TGA-DTA差热失重联用分析仪研究升温速率对输液瓶、一次性医用手套、敷料内心和白鼠肌肉4种典型医疗垃圾热解过程的影响规律.结果表明:在其他试验条件都相同的情况下,随着升温速率的提高,热解反应起始温度、终止温度、峰温升高,反应区间ΔT变宽,发生最大热失重速率的温度也升高,热失重峰的峰高也随之增加;升温速率对热失重率的影响随医疗垃圾种类而不同,对较难分解的医疗垃圾（如敷料内心和白鼠肌肉等）影响大,对容易分解的医疗垃圾（如输液瓶和一次性医用手套等）影响较小.      

On Assessing Decomposition Rates of Plant Debris and Standard Cellulose Samples in Tundra Communities

Russian Journal of Ecology -     

催化分解臭氧的方法及催化剂性能概述

臭氧作为一种有毒物质广泛存在于人们生活环境中,当其浓度超过0.06mg/m^3时,对人体就有害了。因此对臭氧的分解十分必要。本文介绍了多种分解臭氧的方法,并着重介绍 催化分解法。对各种氧分解催化剂的组成、制备方法及活性作一综述。     

Analysis and decomposition of condensed tannins in tree leaves

The decomposition of leaf litter is controlled by several factors. One factor that may play an important role is the content of condensed tannins (proanthocyanidins). Here we designed a combined method to isolate proanthocyanidins from leaf extracts, to convert them to anthocyanidins, and to quantify individual anthocyanidins exactly with a new, simple, but sensitive high-performance liquid chromatography method. We used this method to show composition of proanthocyanidins and to monitor degradation of proanthocyanidins and individual constituents in leaf litter in an aquatic environment over time. Despite the rapid decrease in the initial concentrations, a fraction of the proanthocyanidins remained detectable for several weeks.     

氟里昂12(CCl2F2)燃烧分解催化剂性能的研究

本文对贵金属、氧化物和复合氧化物体系催化剂上氟里昂_(12)(F_(12))燃烧分解反应进行了活性评价和稳定性研究.结果表明:TiO_2,ZrO_2/TiO_2催化剂对氟里昂_(12)燃烧分解反应具有良好的低温催化活性和较好的稳定性,ZrO_2/TiO_2催化剂具有一定的臭氧-催化氧化活性     

负载金属活性碳纤维对NO催化分解性能的研究

碳纤维用于环境保护,污染治理是个重要课题,采用浸渍法研制系列钯负载活性碳纤维,研究了它们对NO的歧化分解性能,并与其它载体催化剂进行比较,实验结果表明负载钯活性碳纤维在300℃以上能催化NO的歧化分解。负载钯活性炭和负载钯炭黑分解NO的能力明显比前者弱,石墨和分子筛载体负载钯催化剂在400℃仍没有催化分解NO的作用。催化反应温度升高,NO流量降低,钯负载量增加有利于NO分解率提高,采用钯－铜混合物负载活性碳纤维可以减少钯的使用量。     

中美贸易模式变化对中国大气汞排放的影响

在全球贸易体系中,美国是中国大气汞排放的主要外部消费驱动力之一。现有研究多核算国际贸易驱动的大气汞排放,识别主要的贸易驱动关系,缺乏中美贸易模式变化对中国大气汞排放的影响分析。本文基于环境扩展型投入产出模型和结构分解分析方法,计算了1997—2017年中美贸易驱动的中国大气汞排放量,并深入分析了贸易相关的社会经济因素对中国大气汞排放变化的相对贡献。研究结果表明:1997—2007年,中美贸易驱动的中国大气汞排放从13.5 t增至32.8 t,2007年后开始回落,2017年回落至13.6 t。贸易规模扩大是推动大气汞排放增加的最主要因素(62.6 t),排放强度降低是大气汞排放减少的最大驱动因素(-67.0 t)。生产技术水平变化和贸易结构变化的贡献相对较小,近年来逐渐起到促进大气汞排放减少的作用,但其贡献不稳定。根据研究结果,提出了加快产业创新升级,优化、稳定贸易结构,提升产品竞争力等建议。     

垃圾填埋场有机污染物的生物降解机理

概述了垃圾填埋场中微生物的作用特性，微生物对有机污染物的降解及其影响因素，介绍了有机污染物降解的两种生化动力学模型：“速度指数模型”和“双曲线速度模型”，以及垃圾降解的动力学方程。     

奥克托今在丙酮中的热安全性研究

奥克托今(HMX)作为爆速高和耐热性好的炸药被广泛应用,其制备提纯工艺均在丙酮中进行。为研究HMX在丙酮中的热安全性,用差示扫描量热-热重(DSC-TG)同步热分析仪研究HMX的热分解过程。测得升温速率为5,10,15,20℃/min的DSC和热重-微商热重法(TG-DTG)曲线,并得出分解峰温分别为279.8,282.5,284.5和288.8℃。用自行设计的临界爆温测试装置,通过小容量法测定HMX、丙酮以及HMX的丙酮溶液的临界爆炸温度。结果表明,在试验条件下,HMX的丙酮溶液的临界爆炸温度高于纯HMX的临界爆炸温度,说明丙酮抑制了HMX的热分解反应,当HMX溶液质量分数为10%时,临界爆炸温度最高,热安全性最好。