Software as a bridge between theory and practice in life cycle assessment

Three mutually dependent elements are required for the application of life cycle assessment: methodology, data and software. Obviously, the design of software is determined by the methodology and the type of data available. Conversely, the development of software dictates the way in which data should be collected and recorded, and improves the theoretical framework, as it forces one to state the principles clearly and unambiguously. The influence of the development of software on both data and methodology is addressed and illustrated by examples, with reference to two key terms: transparency and explicitness. Three types of influence are distinguished: the design of a protocol, the formulation in terms of recipes, and the presentation of data.     

消油剂乳化率检验中标准曲线的选择

本文经过比实验，详细研究了添加双象１号消油剂对原油标线的影响，并对乳化率检验中的两种标准曲线进行了统计检验。结果表明：不添加消油剂制作的原油标线可使乳化率结果降低１￣３％左右，甚至个别消油剂的乳化率结果可相差２０％左右，两条标线的统计差异非常显著。所以制作标准曲线时必须按比例添加消测剂才能确保执法数据的可靠性。     

GJB 150A淋雨试验强化试验程序数值模拟和试验装置设计研究

目的 研究GJB 150.8A—2009《军用装备实验室环境试验方法第8部分:淋雨试验》中强化试验程序的工程实现方法.方法 在标准解读的基础上,以强化试验程序用喷嘴为对象,建立数值模型,分析喷嘴在强化试验程序过程中的流场分布,并基于分析结果给出强化试验程序试验装置设计的思路和方法.结果 在喷嘴内,压力变化剧烈,极短距离内由276 kPa迅速降至101 kPa.水流经过喷嘴经历了激烈的加速过程,从距离喷嘴出口0.01～0.4 m,水流速度从251 m/s迅速降至17.8 m/s,到远场趋于稳定.结论 分析结果对指导强化试验程序的试验装置的设计和试验实施具有重要参考意义.     

渣油－水乳化液作为路面抑尘剂的研究

为了有效抑制汽车运输路面的扬尘，选择低浓度渣油－水乳化液作为抑尘剂，通过在实验室大量的试验，掌握了一组渣油乳化的最佳配方及其制备工艺，即渣油３％－６％，乳化剂约０．５％，水９３．５％－９６．５％，制备温度＞７０℃．经过室内和现场大规模试验表明，当路面喷洒量达到２．２ｋｇ／ｍ２时，其有效抑生时间达到１０ｄ以上，并且在一定程度起到养路的作用，长期使用可取得显著的综合经济效益．     

The application of life cycle assessment to design

This paper explores the practical application of life cycle assessment (LCA) to product system development. While life cycle assessment methods have been studied and demonstrated extensively over the last two decades, their application to product design and development has not been critically addressed. Many organizational and operational factors limit the integration of the three LCA components (inventory analysis, impact assessment and improvement assessment) with product development. Design of the product system can be considered a synthesis of individual decisions and choices made by the design team, which ultimately shape the system's environmental profile. The environmental goal of life cycle design is to minimize the aggregate environmental impacts associated with the product system. Appropriate environmental information must be supplied to decision makers throughout each stage of the development process to achieve this goal. LCA can serve as a source of this information, but informational requirements can vary as the design moves from its conceptual phase, where many design choices are possible, to its detailed design and implementation. Streamlined approaches and other tools, such as design checklists, are essential. The practical use of this tool in product development also depends on the nature and complexity of the product system (e.g. new vs. established), the product development cycle (time-to-market constraints), availability of technical and financial resources, and the design approach (integrated vs. serial). These factors will influence the role and scope of LCA in product development. Effective communication and evaluation of environmental information and the integration of this information with cost, performance, cultural and legal criteria will also be critical to the success of design initiatives based on the life cycle framework. An overview of several of these design initiatives will be presented.     

生态农业建设中的水资源生命周期及系统功能响应

论文从生命周期角度，对原先自然环境恶劣、通过生态农业建设取得了良好效果的3个生态农业县的水资源利用进行了全过程研究。结果表明，水资源生命周期过程的进展情况受多种因素影响。目前，各生态农业县水资源生命周期过程仍处在发育的初级阶段。这一过程的完整性与系统生态、经济和社会功能的提高成正比。     

聚合氯化铝铁检验方法研究

聚合氯化铝铁是一种新型净水剂,它结合铝系和铁系净水剂的优点,有助于减少水中铅含量。利用《水处理剂聚合氯化铅(GB15892-1995)》和《净化剂聚合氯化铁(GB14591-93)》的方法,对聚合氯化铅铁主要技术指标的检验做了探索。经反复实验,取得了较好的效果。     

通信电缆、光缆及材料环境试验研究

简述了通信电缆、光缆及材料环境试验研究概况,进行了线缆 土壤腐蚀数据积累及规律性研究,取得了大量数据和研究成果,将 成果应用到国民经济建设中,为线缆的护层结构设计、材料选择、生 产维护和制定标准规范提供了科学依据。     

铸态珠光体基体球墨铸铁 S195曲轴的研制

针对生产实际要求,研究了微量元素加入量、开箱时间等对铸态球墨铸铁珠光体量及性能的影响,试验了铸态球墨铸铁曲轴的各种常规性能.     

上海市在用车推行I/M制度中检测方法的研究

对在用车实施I/M制度，采用底盘测功机模拟道路工况检测汽车排放污染物，按美国国家环保局（EPA）推荐的方法有3种：瞬态短工总法（IM240）、稳态加速模拟工况法（ASM）和瞬态短工部简易质量分析检测法（VMAS）。根据上海市的试验结果，对上述3种方法的检测精度、设备投资以及运行维护诸方面进行分析比较，阐明上海市采用VMAS方法的依据和应注意的问题，并对应采用的模拟道路工况提出了看法。