电感耦合等离子体发射光谱法测定石化废水中的重金属

建立了硝酸加热消解后采用电感耦合等离子体发射光谱(ICP-OES)测定石化废水中重金属(As,Cd,Cr,Cu,Zn,Pb,Mn)的方法,优化了仪器工作参数,得到了线性回归方程,并对该方法进行了评价。优化后的仪器工作参数为射频功率1 150 W、雾化器流量0.70 L/min、辅助气流量0.50 L/min。各重金属元素回归方程的相关系数均在0.999 9以上,检出限为0.000 18~0.007 00 mg/L,相对标准偏差为0.1%~2.0%,加标回收率为96.3%~102.2%。该方法具有线性关系好、检出限低、精密度和准确度高、分析速度快等优点。     

Effect of the allelochemicals from the macrophyte Egeria densa on the competitive interactions of pelagic and littoral cladocerans

Macrophytes release allelochemicals, which affect pelagic cladocerans such as Daphnia. Using population growth experiments, we analysed the effects of allelochemicals from the macrophyte Egeria densa on the interaction between Daphnia mendotae and three littoral cladocerans (Diaphanosoma birgei, Macrothrix triserialis and Simocephalus mixtus). We found that allelochemicals from E. densa increased the abundance of all the tested cladocerans in spite of the presence of a competitor. This effect was stronger (nearly three to four times higher than in controls) for D. birgei and M. triserialis in the absence of D. mendotae. Independent of the presence of allelochemicals, S. mixtus, but not D. birgei and M. triserialis, reduced the abundance of D. mendotae as compared to controls. The rate of population increase (r) per day was significantly elevated due to the presence of Egeria’s allelochemicals (from 0.07–0.16?d^?1 without allelochemicals against 0.12–0.24?d^?1 with allelochemicals). In our competition experiments, the rates of population increase of the cladocerans were lower than those in single-species cultures when cultured in the absence of allelochemicals. However, in the presence of allelochemicals this trend was not consistent. Thus, the positive effects of Egeria’s allelochemicals over the cladoceran populations may enhance the grazing pressure on phytoplankton.     

Low uptakes of Cd,Cu, and Zn in Dugesia japonica,a freshwater planarian with higher tolerance to metals

Although a freshwater planarian is proposed as a potential model for studying toxicities of environmental pollutants, they are less sensitive to metal exposures, compared to other freshwater invertebrates. We hypothesised that the metal uptake is low in treated planarians, which may lead to their higher tolerance to metals. The acute toxicities of Cu and Zn to Dugesia japonica were determined. The 24- and 48-h median lethal concentrations were 4.50 and 3.46?mg?L^?1, respectively, for Cu, and 41.97 and 37.79?mg?L^?1, respectively, for Zn. Accordingly, combining with the data on Cd in our previous study, higher tolerance of planarians to metals was revealed. Also, tissue levels of Cd, Cu, and Zn in treated D. japonica were determined, and their dissolved uptake rate constants (k₁) were calculated. Results showed that bioaccumulations of these metals in D. japonica were, indeed, lower than that in other freshwater invertebrates having higher susceptibilities to these metals.     

Evidence of new particle formation during post monsoon season over a high-altitude site of the Western Ghats,India

The formation of ultrafine particles, their growth, and associated characteristic features has been studied during new particle formation events over a high-altitude station of the Western Ghats during the 2014 post-monsoon season. Most of the events were observed during noon time where particle bursts in the nucleation-mode size range from 5 to 25 nm followed by sustained growth in size. This phenomenon persists for ～4–8 h with a growth rate of 1–2 nm h^–1. Peak concentrations of nucleation-mode particles during the event generally vary from 2300 to 5000 cm^–3. The mean growth rate is 1.4 ± 0.42 nm h^–1, particle formation rate is 1.14 ± 0.22 cm^–3 s^–1, coagulation sink is 0.35 ± 0.22 cm^–3 s^–1, and condensational sink is 15.4 ± 2.6?×?10^–3 s^–1. All these values are comparable with earlier results from Indian region. Comparison of size-segregated particle number concentration during days of new particle formation events and those without new particle formation were carried out showing a distinct variation in nucleation and Aitken mode with least variability associated with the accumulation mode.     

中国碳排放强度的时空演进及跃迁机制

面对气候变化所带来的生存危机以及环境治理的复杂状况,对中国碳排放强度时空演进的动态监测与预警治理的研究是实现碳排放强度下降目标的关键。文章测算1997—2015年中国大陆30个省区碳排放强度的空间面板数据,采用探索性时空数据分析(ESTDA)方法对中国碳排放强度的空间相关性、集聚特征及其时空跃迁进行空间统计分析,借助分位数回归与时空跃迁嵌套模型,揭示在时间和空间推移的双重作用下中国各省区碳排放强度的时空跃迁机制。研究结果表明:(1)中国30个省区的碳排放强度在时空分布上并不是完全随机状态,各个省区碳排放强度之间具有显著的空间相关性特征,碳排放强度的变动趋势会受到其相临近省区碳排放强度的影响,省域间的碳排放强度在空间分布上呈现"集聚"与"分异"并存的时空演进特征。(2)中国碳排放强度空间集聚趋势增强,具有高度的凝固性和较低的流动性,10个高碳排放强度省区碳排放强度的稳定性将成为制约中国碳排放强度整体跃迁的重点省区,相关省区的跃迁性将成为驱动中国碳排放强度整体跃迁的关键省区。(3)各省区的碳排放强度空间集聚过程中存在时空跃迁的驱动模式和制约模式,分位数回归模型能够很好地解释各驱动因素对碳排放强度时空跃迁的驱动机制,不同响应阶段的驱动因素的分位数与碳排放强度时空跃迁类型之间具有很强的嵌套性。(4)根据各省区碳排放强度时空演进及其跃迁机制的分析结果,进一步提出加强对关键省区碳排放强度的有效监测与治理,加大碳排放的约束力度等差异化的碳减排调控措施。     

京津冀产业碳排放强度变化及驱动因素研究

为探讨京津冀地区温室气体排放强度变化的影响因素,采用对数平均迪式分解模型及归因分析(LMDI-Attribution)方法,基于1996—2014年数据从细分行业角度进行研究。针对温室气体排放强度作产业结构、能源强度和排放因子三因素LMDI乘法分解,对温室气体排放强度变化的影响效应作归因分析,量化4个行业对分解因素影响效应的贡献,得到以下主要结论:1996—2014年京津冀地区温室气体排放强度主要呈现下降趋势,累计下降23.05%。其中,能源强度是温室气体排放强度下降的主导因素,其影响效应为-61.18%,对这一影响效应贡献最大的是工业,并且四大经济部门均通过能源强度在不同程度上使得温室气体排放强度有所减小,可见"阶梯电价"、"千家企业节能项目"、"十大重点节能项目"等相关政策在工业发展中对提高能源效率的作用明显。产业结构使得温室气体排放强度增加23.53%,其主要贡献者是工业,说明"工业产品出口退税率调整"等一系列政策的效果不明显;然而农业则使得温室气体排放强度降低,贡献值为3.09%。碳排放因子在1996—2014年间对温室气体排放强度的影响为60.47%,是京津冀地区温室气体排放强度增加的主要因素,说明京津冀地区的能源结构不合理。工业对这一效应的贡献最大为55.97%。可见,工业在京津冀地区的温室气体减排工作中起到最为关键的作用。     

中国工业碳排放达峰的情景预测与减排潜力评估

实现2030年碳排放达峰不仅是中国为应对全球气候变化向国际社会做出的郑重承诺,也是中国未来经济结构转型与可持续发展的必然选择。基于中国实现2030年碳排放达到峰值的宏观目标为背景,本文以中国碳排放的主要行业工业为研究对象,首先运用拓展的STIRPAT模型对工业及其9个细分行业的碳排放达峰进行了情景预测,然后基于公平和效率的双重视角对工业细分行业的减排潜力进行评估。研究表明:(1)仅有低碳情景和抑制排放情景2可以实现中国碳排放2030年达峰,低碳情景是实现中国工业碳排放达峰的最佳发展模式,达峰时间最早(2030年),峰值最低(140.43亿t)。激进排放情景则是最差的发展模式,达峰时间最晚(2036年),峰值也最高(150.09亿t)。(2)工业内部各细分行业碳排放的最优达峰情景差别较大。建材和纺织制造业能够实现提前达峰,可以在这类行业率先实施达峰管理措施,使其带动其他行业陆续达峰。(3)最具减排潜力的行业是石油制造业,其次是电力行业,这些减排潜力较大的行业应该成为国家节能减排的重点对象。(4)基于工业各细分行业在减排公平性和效率性上的差异将工业9个细分行业分为四类。其中,石油、钢铁制造业和电力行业属于"高效高公平行业";化工、建材制造业属于"低效高公平行业";采掘业属于"高效不公平行业";纺织、轻工和机电制造业属于"低效不公平行业"。中国应针对不同类型的行业制定出相应的减排战略,将减排重点放在各行业最具潜力的方面。最后,文章对实现中国工业碳排放达峰管理提出了几点政策建议。     

Carbon dioxide emissions from cities in China based on high resolution emission gridded data

Based on the China high resolution emission gridded data (1 km spatial resolution), this article is aimed to create a Chinese city carbon dioxide (CO₂) emission data set using consolidated data sources as well as normalized and standardized data processing methods. Standard methods were used to calculate city CO₂ emissions, including scope 1 and scope 2. Cities with higher CO₂ emissions are mostly in north, northeast, and eastern coastal areas. Cities with lower CO₂ emissions are in the western region. Cites with higher CO₂ emissions are clustered in the Jing-Jin-Ji Region (such as Beijing, Tianjin, and Tangshan), and the Yangtze River Delta region (such as Shanghai and Suzhou). The city per capita CO₂ emission is larger in the north than the south. There are obvious aggregations of cities with high per capita CO₂ emission in the north. Four cities among the top 10 per capita emissions (Erdos, Wuhai, Shizuishan, and Yinchuan) cluster in the main coal production areas of northern China. This indicates the significant impact of coal resources endowment on city industry and CO₂ emissions. The majority (77%) of cities have annual CO₂ emissions below 50 million tons. The mean annual emission, among all cities, is 37 million tons. Emissions from service-based cities, which include the smallest number of cities, are the highest. Industrial cities are the largest category and the emission distribution from these cities is close to the normal distribution. Emissions and degree of dispersion, in the other cities (excluding industrial cities and service-based cities), are in the lowest level. Per capita CO₂ emissions in these cities are generally below 20 t/person (89%) with a mean value of 11 t/person. The distribution interval of per capita CO₂ emission within industrial cities is the largest among the three city categories. This indicates greater differences among per capita CO₂ emissions of industrial cities. The distribution interval of per capita CO₂ emission of other cities is the lowest, indicating smaller differences of per capita CO₂ emissions among this city category. Three policy suggestions are proposed: first, city CO₂ emission inventory data in China should be increased, especially for prefecture level cities. Second, city responsibility for emission reduction, and partitioning the national goal should be established, using a bottom-up approach based on specific CO₂ emission levels and potential for emission reductions in each city. Third, comparative and benchmarking research on city CO₂ emissions should be conducted, and a Top Runner system of city CO₂ emission reduction should be established.     

畜牧业“碳排放”到“碳足迹”核算方法的研究进展

全球变暖趋势日益加剧,不仅影响农业可持续发展,而且威胁到人类生存。畜牧业碳排放因其在农业碳排放中乃至全球碳排放中占比较大而日益备受关注。准确核算畜牧业碳排放是制定切实可行的碳减排政策的前提,也为我国在气候变化下承担共同但有差别的减排责任提供话语权。本文基于研究范式的演进,对畜牧业碳排放到碳足迹核算方法的研究发展进行了系统梳理,研究表明,在学者的不断研究与质疑下,畜牧业碳排放到碳足迹的核算方法经历了从OECD核算法、IPCC系数法到生命周期法与投入-产出法的演变与完善,学术界认为区域异质性、养殖规模与管理方式均影响碳足迹;散养比规模化养殖产生更多的碳排放,舍饲比户外放牧排放更多的碳。畜牧业碳足迹核算能够更加全面地反映畜牧业全生命周期的碳排放情况,但由于研究假设、研究方法及研究样本等差异导致不同区域、不同畜产品的碳排放核算结果存在不确定性。运用生命周期法和投入-产出法对欧盟成员国畜牧业碳排放的核算结果基本一致,但运用IPCC系数法和全生命周期法对中国畜牧业碳排放核算中,牛、猪和羊的碳排放量排序结果不尽一致。鉴于核算结果的差异性,本研究对不同核算方法的起源、最早采用时间、特点、局限性等方面进行了归纳总结,并建议后续研究探讨基于生命周期评价的畜牧业碳足迹研究边界的延伸性,标准化畜牧业碳排放或碳足迹核算,避免学者重复核算畜牧业碳排放,以便深入展开畜牧业碳排放其他方面的研究。     

中国新克强指数的构建与实证分析

随着中国经济进入新常态,英国《经济学人》杂志构建的克强指数已无法反映中国经济的全貌,如何客观地反映中国经济的真实状况成为一个迫切需要解决的现实问题。为更好地测度中国经济运行的真实状况,本文根据李克强总理提出的"未来会更加关注就业、居民收入和生态环境的持续改善"的愿景,在原有克强指数的基础上,增加年末就业人员数、农村居民家庭人均纯收入、城镇居民家庭人均可支配收入等就业和收入方面的指标,使用中国1995—2015年的相关数据和层次分析法构建了克强指数的修订版本即新克强指数,并将新克强指数与GDP增长率、克强指数进行了比较,发现新克强指数在反映中国经济波动和经济整体运行状态上有更为优良的性质。与GDP增长率相比,新克强指数克服了服务业比重提高带来的熨平效应,进而灵敏地反映中国经济波动情况,并对异常事件更加具有敏感性。相对于克强指数而言,新克强指数破除了因中国在第二产业上存在失衡性发展所带来的经济波动的杠杆效应,降低了经济增长中的虚假成分,从而与中国经济运行的整体关联度更为密切。此外,相对于克强指数而言,新克强指数在反映经济景气方面有着较好的时效性与关联性。采用时差相关分析法对新克强指数与宏观经济指标之间的关系进行分析,发现新克强指数在反映第一产业增加值、第三产业增加值、最终消费支出、资本形成总额、对外贸易、通货膨胀等方面具有优势。研究表明:新克强指数是更适宜测度中国经济的多元评价指标,为测度中国经济运行的真实状况提供了科学的参考依据。