Potential particulate pollution derived from UV-induced degradation of odorous dimethyl sulfide

UV-induced degradation of odorous dimethyl sulfide (DMS) was carried out in a static White cell chamber with UV irradiation. The combination of in situ Fourier transform infrared (FT-IR) spectrometer, gas chromatograph-mass spectrometer (GC-MS), wide-range particle spectrometer (WPS) technique, filter sampling and ion chromatographic (IC) analysis was used to monitor the gaseous and potential particulate products. During 240 min of UV irradiation, the degradation e ciency of DMS attained 20.9%, and partially oxidized sulfur-containing gaseous products, such as sulfur dioxide (SO2), carbonyl sulfide (OCS), dimethyl sulfoxide (DMSO), dimethyl sulfone (DMSO2) and dimethyl disulfide (DMDS) were identified by in situ FT-IR and GC-MS analysis, respectively. Accompanying with the oxidation of DMS, suspended particles were directly detected to be formed by WPS techniques. These particles were measured mainly in the size range of accumulation mode, and increased their count median diameter throughout the whole removal process. IC analysis of the filter samples revealed that methanesulfonic acid (MSA), sulfuric acid (H2SO4) and other unidentified chemicals accounted for the major non-refractory compositions of these particles. Based on products analysis and possible intermediates formed, the degradation pathways of DMS were proposed as the combination of the O(1D)- and the OH- initiated oxidation mechanisms. A plausible formation mechanism of the suspended particles was also analyzed. It is concluded that UV-induced degradation of odorous DMS is potentially a source of particulate pollutants in the atmosphere.     

Experimental study on filtration and continuous regeneration of a particulate filter system for heavy-duty diesel engines

This study investigated the filtration and continuous regeneration of a particulate filter system on an engine test bench, consisting of a diesel oxidation catalyst（DOC） and a catalyzed diesel particulate filter（CDPF）. Both the DOC and the CDPF led to a high conversion of NO to NO2 for continuous regeneration. The filtration efficiency on solid particle number（SPN） was close to100%. The post-CDPF particles were mainly in accumulation mode. The downstream SPN was sensitively influenced by the variation of the soot loading. This phenomenon provides a method for determining the balance point temperature by measuring the trend of SPN concentration.     

Compositions and sources of organic acids in fine particles (PM2.5) over the Pearl River Delta region, south China

Organic acids as important constituents of organic aerosols not only influence the aerosols' hygroscopic property, but also enhance the formation of new particles and secondary organic aerosols. This study reported organic acids including C14–C32fatty acids, C4–C9dicarboxylic acids and aromatic acids in PM2.5collected during winter 2009 at six typical urban, suburban and rural sites in the Pearl River Delta region. Averaged concentrations of C14–C32fatty acids, aromatic acids and C4– C9 dicarboxylic acids were 157, 72.5 and 50.7 ng/m3, respectively. They totally accounted for 1.7% of measured organic carbon. C20–C32fatty acids mainly deriving from higher plant wax showed the highest concentration at the upwind rural site with more vegetation around, while C14–C18fatty acids were more abundant at urban and suburban sites, and dicarboxylic acids and aromatic acids except 1,4-phthalic acid peaked at the downwind rural site. Succinic and azelaic acid were the most abundant among C4–C9dicarboxylic acids, and 1,2-phthalic and 1,4-phthalic acid were dominant aromatic acids. Dicarboxylic acids and aromatic acids exhibited significant mutual correlations except for 1,4-phthalic acid, which was probably primarily emitted from combustion of solid wastes containing polyethylene terephthalate plastics. Spatial patterns and correlations with typical source tracers suggested that C14–C32fatty acids were mainly primary while dicarboxylic and aromatic acids were largely secondary. Principal component analysis resolved six sources including biomass burning, natural higher plant wax, two mixed anthropogenic and two secondary sources; further multiple linear regression revealed their contributions to individual organic acids. It turned out that more than 70% of C14–C18fatty acids were attributed to anthropogenic sources, about 50%–85% of the C20–C32fatty acids were attributed to natural sources, 80%–95% of dicarboxylic acids and 1,2-phthalic acid were secondary in contrast with that 81% of 1,4-phthalic acid was primary.     

北京市PM5.0可吸入颗粒物反演及其时空分布分析

分析城市可吸入颗粒物的空间特征及影响因素对于制定更为有效的可吸入颗粒物污染控制政策具有重要的现实意义.本研究在实际采样和遥感数据处理基础上,构造差值植被指数(DVI),通过建立TM影像与对应PM5.0颗粒物实测值之间的相关关系模型,对北京市2008~2010年3 a的PM5.0的分布进行了反演计算和精度分析;研究了NDBI和NDMI对PM5.0浓度的影响,进一步揭示了北京五环区域范围内可吸入颗粒物的时空分布特征.结果表明,采用DVI反演PM5.0分布的方法可行,反演精度在可接受范围内;整体上研究区2008年PM5.0颗粒物污染最轻,西南三环和四环以及东南三四环之间为颗粒物污染的高值区,西北五环附近颗粒物污染较轻;NDBI(归一化建筑指数)、NDMI(归一化水汽指数)与PM5.0可吸入颗粒物的分布分别呈现显著的负相关和正相关关系,且二者对PM5.0的影响相近.     

2012年春季京津冀地区一次沙尘暴天气过程中颗粒物的污染特征分析

本研究表征了2012年春季一次沙尘暴天气过程中京津冀地区大气可吸入颗粒物(PM10)的污染特征.借助PM10的水溶性元素、有机碳和元素碳的浓度,分析推断沙尘暴天气过程中矿物气溶胶对城市气溶胶污染的交汇叠加作用.使用中流量大气颗粒物采样器,于2012年4月1日～5月24日,在北京市西三环、天津空港经济区和张家口火车南站附近同时采集可吸入颗粒物(PM10),采用离子色谱和元素碳/有机碳分析仪分析获取其水溶性离子、元素碳和有机碳浓度.结果表明,采样期间北京、天津和张家口这3个采样点PM10质量浓度的日均值分别为233.82、279.64和238.13μg·m-3.4月27～29日,3个地区发生了沙尘暴天气,PM10质量浓度的最大日均值分别达755.54、831.32、582.82μg·m-3.沙尘暴期PM10的有机碳(OC)浓度、二次有机碳(SOC)/OC的比值、硝酸根(NO-3)和硫酸根(SO2-4)浓度均高于非沙尘暴期间.采用电荷平衡计算证明沙尘暴期间大气颗粒物表明呈碱性,说明外来沙尘暴与本地污染相互叠加,矿物元素改变了颗粒物表面的酸碱性,沙尘暴和有机物发生耦合,促进了二次有机物的转化.     

东莞市大气亚微米粒子PM1及其中水溶性无机离子的污染特征

2011年8月—2012年7月期间,利用中流量(100 L·min-1)大气采样器对东莞市A和B两点(A:生活区,B:工业区)进行PM1、PM1~2.5、PM2.5~10采样,并定量分析颗粒物上F-、Cl-、NO-3、SO2-4、NH+4、Na+、K+、Ca2+、Mg2+等9种水溶性无机离子.分析结果显示,工业区B点的细粒子污染较生活区A点严重,B点PM1质量浓度年均值为48μg·m-3,其浓度是A点的1.2倍.A、B两点PM1对PM2.5和PM10的质量贡献率无明显差异,平均贡献率分别高达69%和45%.二次离子SO2-4、NO-3、NH+4及与燃烧行为有关的K+、Cl-等5种离子在细粒子PM1上富集,这5种离子对PM1质量的贡献率分别为18.82%~19.76%、4.98%~5.47%、3.98%~4.12%、2.03%~2.27%和3.39%~3.78%.而其他4种离子,Ca2+、Mg2+、F-和Na+积聚在粗粒子PM2.5~10上.PM10/PM2.5/PM1三种粒子中,PM1粒子酸性值AE/CE(阴离子当量浓度/阳离子当量浓度)比值和硫转化率SOR、氮转化率NOR值均是最高.     

北京大气颗粒物和重金属铅干沉降通量及季节变化

为了解大气颗粒物和重金属铅(Pb)干沉降通量的变化规律,采用聚氨酯泡沫膜片为代用面联合干湿沉降自动观测设备,于2013年12月~2014年11月在北京城区采集了颗粒物干沉降,利用微波消解和电感耦合等离子体质谱仪对样品中全量Pb和水溶性Pb进行了测试分析.结果表明,北京大气颗粒物和Pb干沉降通量分别为0.84 t·(hm~2·a)~(-1)和7.56mg·(m~2·a)~(-1),呈现出春季冬季秋季~夏季的特征.大气颗粒物中水溶性Pb干沉降通量为3.14 mg·(m~2·a)~(-1),占Pb干沉降总量的43%,这一比例呈现出冬春季高于夏秋季的特征.人为源排放不仅增加了大气颗粒物和Pb的干沉降通量,也改变了水溶性Pb干沉降通量的季节分布.研究结果对科学评估重金属沉降的生态影响和健康效应提供了科学基础,同时凸显了消减人为源重金属排放的重要性.     

紫色水稻土颗粒有机质对重金属的富集特征

在重庆合川区和铜梁区随机采集了20个紫色水稻土,将其分成颗粒有机质(0.053~2 mm,POM)、砂粒(0.053~2mm)和细土(0.053 mm)这3个组分,通过比较不同组分的有机碳及重金属(Cu、Zn、Pb、Cd)含量和分布状况,研究了紫色水稻土中POM对重金属的富集特征及其与土壤理化性质如pH、CEC、黏粒和土壤有机碳(SOC)等的关系.结果表明,采样区紫色水稻土的POM含量范围为7.31~44.76 g·kg~(-1),平均值为19.20 g·kg~(-1),有机碳含量为96.61~263.17 g·kg~(-1),平均值为151.34 g·kg~(-1),显著高于原土及其他组分,对土壤有机碳的贡献率为8.63%~48.62%,代表了一大部分土壤有机碳库.POM中的Cu、Zn、Pb和Cd平均富集系数分别为3.35、1.14、2.88和2.14,显著高于其他组分,表现出一定的富集作用,对上述重金属的贡献率分别为6.02%、2.22%、5.24%和3.21%,POM对Cu、Pb的富集能力和贡献率均显著大于Zn和Cd.相关分析结果表明,POM含量与SOC、pH、CEC、黏粒(0.002 mm)呈显著或极显著正相关,SOC是主要因素.POM-C含量与总量分别与黏粒含量、SOC呈显著相关.POM中重金属总量与SOC、pH、POM-C总量呈显著或极显著正相关,SOC是最关键因子;与其他重金属相比,Zn在POM中的总量与土壤性质的回归系数最高,关系最为密切.     

喷射时刻对柴油甲醇组合燃烧发动机颗粒物排放的影响

为了进一步减少甲醇掺烧后的柴油机颗粒物排放,在一台由增压中冷的高压共轨柴油机改造成的柴油甲醇组合燃烧(DMCC—diesel/methanol compound combustion)发动机上详细研究了柴油喷射时刻对两种燃料共燃时的颗粒物生成及其排放的影响.试验工况选择重型柴油机常用的A50工况.试验结果表明,当柴油在上止点后喷射时,颗粒物排放的数量浓度随着甲醇替代率的增加而减少,当上止点前喷射时,颗粒物的数量浓度先减少后增加.随着喷射时刻的提前,颗粒中超细颗粒所占比例增大.随着喷射时刻的推迟,甲醇替代率降低颗粒物质量浓度的作用增强,同时甲醇替代率降低颗粒物几何平均直径的作用减弱.     

贵阳市一居民区大气颗粒态汞的污染状况

2004年4、7、8、11、12月采用微型捕集管-冷原子荧光光谱法对贵阳市一个居民区大气中的痕量颗粒态总汞(TPM)进行了测定。结果表明:TPM日均浓度范围是0.149~4.853 ng.m-3,平均值是1.091 ng.m-3,显著高于背景参考值1~86 pg.m-3;TPM浓度采暖期大于非采暖期,夜间通常大于白昼;TPM与大气气态总汞(TGM)可能具有同源性;燃煤、垃圾焚烧以及周边工厂排放的含尘烟气可能是居民区大气颗粒态汞的主要人为来源。