垃圾渗滤液特性分析及Fenton预处理研究

利用Fenton—混凝沉淀法预处理广西某垃圾焚烧发电厂和垃圾填埋场的垃圾渗滤液,对Fenton试剂以及混凝沉淀进行了单因素分析,分别研究了垃圾渗滤液在不同的n[Fe2+]/n[H2O2]、H2O2投加量、FeSO4投加量、pH值、反应时间、PAC投加量等条件下的处理效果。结果表明:垃圾渗滤液经Fenton—混凝预处理,对COD、色度、SS处理效果好,对NH3—N去除效果不明显;渗滤液的可生化性有所提高,可进行后续生化处理。     

纸基复合包装中铝塑分离的湿法工艺条件研究

纸基复合包装中的纸基部分通过水力碎浆分离后可直接用于生产再生纸. 其铝塑部分由1层0.02～0.03 mm厚的铝箔和2层0.03～0.08 mm厚的低密度聚乙烯膜层压复合而成,主要对铝塑的湿法分离进行研究.比较了甲酸、乙酸、盐酸3种剥离剂的分离效果; 用甲酸作为铝塑剥离剂时, 考察了剥离剂的浓度、反应温度、液固比及破碎尺寸对铝塑分离的影响; 根据铝塑分离时间、分离率、铝的损失率等指标,通过正交试验及方差分析优化铝塑分离的工艺条件. 结果表明,甲酸分离铝塑的最优条件: 剥离剂浓度为4 mol/L, 反应温度为60 ℃,液固比为60 L/kg, 破碎尺寸为5 cm×5 cm. 在该条件下, 铝塑的分离率达到100%.      

磁絮凝高效处理高浊度废水的性能及机理研究

自来水供水厂在运行过程会产生大量高浊度废水,其中富集了许多微生物、有机物及无机杂质,若直接排放会严重污染河流水体及周边土壤.采用磁絮凝工艺处理自来水厂供水过程中产生的高浊度废水,通过单因素和正交试验考察了聚合氯化铝(PAC)投加量、磁种(Fe3O4)投加量、废水初始pH值和沉降时间对废水中浊度、COD和UV254去除效...     

Incentive compatibility tests of choice experiment value elicitation questions

This paper uses laboratory experiments with induced values to address fundamental issues related to the incentive compatibility of choice experiment value elicitation questions. In particular, we compare two- versus three-option choice sets and the effect of using alternative provision rules, including one where the outcome is influenced by both participant and “regulator” votes. We find the overall proportion of choices that are inconsistent with induced preferences is rather low. However, there are more deviations from induced preferences for two-option choice sets, and for alternatives to a simple plurality vote implementation rule. A multinomial probit analysis of choices in tandem with a mixed logit welfare analysis suggests there is a statistically significant but modest degree of bias towards selecting the status quo option.     

湍球塔内气流分布优化的数值计算及试验

通过对湍球塔 (TCA)内三维流场的数值计算 ,找到了较佳的结构参数 ,在此基础上进行的试验表明 ,计算结果与试验结果相吻合。计算程序可为 TCA的设计及保证其长期安全经济运行提供理论依据。     

VALIDATION OF THE SWAT MODEL ON A LARGE RWER BASIN WITH POINT AND NONPOINT SOURCES1

ABSTRACT: The State of Texas has initiated the development of a Total Maximum Daily Load program in the Bosque River Watershed, where point and nonpoint sources of pollution are a concern. Soil Water Assessment Tool (SWAT) was validated for flow, sediment, and nutrients in the watershed to evaluate alternative management scenarios and estimate their effects in controlling pollution. This paper discusses the calibration and validation at two locations, Hico and Valley Mills, along the North Bosque River. Calibration for flow was performed from 1960 through 1998. Sediment and nutrient calibration was done from 1993 through 1997 at Hico and from 1996 through 1997 at Valley Mills. Model validation was performed for 1998. Time series plots and statistical measures were used to verify model predictions. Predicted values generally matched well with the observed values during calibration and validation (R²≥ 0.6 and Nash‐Suttcliffe Efficiency ≥ 0.5, in most instances) except for some underprediction of nitrogen during calibration at both locations and sediment and organic nutrients during validation at Valley Mills. This study showed that SWAT was able to predict flow, sediment, and nutrients successfully and can be used to study the effects of alternative management scenarios.     

SAMPLING FRAME FOR IMPROVING PEBBLE COUNT ACCURACY IN COARSE GRAVEL‐BED STREAMS1

ABSTRACT: Improved sampling techniques are needed to increase the accuracy of pebble‐count particle‐size distributions used for stream studies in gravel‐bed streams. However, pebble counts are prone to operator errors introduced through subjective particle selection, serial correlation, and inaccurate particle‐size measurements. Errors in particle‐size measurements can be minimized by using a gravel template. Operator influence on particle selection can be minimized by using a sampling frame, 60 by 60 cm, in which sampling points are identified by the cross points of thin elastic bands. Serial correlation can be minimized by adjusting the spacing between the cross points and setting it equal to the dominant large particle size (=D₉₅). In a field test in a cobble‐bed stream, the sampling frame developed in this study produced slightly coarser size distributions, particularly in the cobble range, than the traditional heel‐to‐toe walk that selects particles with a blind touch at the tip of the boot. The sampling frame produced more similar sampling results between two operators than heel‐to‐toe walks. The difference between the two sampling methods is attributed to an unbiased selection of fine and coarse particles when using the sampling frame.     

制革废水试验研究

采用预处理-混凝沉淀-微滤组合工艺对制革废水进行试验研究.结果表明,制革废水经预处理后用硫酸亚铁酸洗废液作混凝剂是行之有效的,经此工艺处理后,COD、BOD5、SS和色度去除率分别为80.4%、87.2%、88.6%和91.7%,处理后废水水质达到排放标准且可回用于生产.在较低温度下,用硫酸亚铁作混凝剂仍能较好地完成混凝沉淀,验证了硫酸亚铁的低温混凝效果.此工艺具有很好的应用前景,尤其适合北方寒冷地区.     

氧化塘底泥对作物生长影响的研究

本文通过农田试验 ,得出氧化塘底泥可以改良土壤结构、增加有机质含量、微生物数量、提高作物产量的结论。因此 ,底泥可以作为一种有机肥应用于农业。     

医疗废物焚烧过程中脱氯机理和试验

医疗废物中包括含有大量的PVC,焚烧时会产生HCl从而污染环境,因此医疗废物在焚烧处理时需要进行脱氯。经热力学计算可知,医疗废物焚烧炉内喷入脱氯吸收剂在燃烧过程脱氯,效果最好的脱氯剂是Ca(OH)2、CaO、CaCO3、MgCO3、Mg(OH)2和MgO。在固定床上进行的医疗废物焚烧过程中脱氯试验结果表明:温度对脱氯有着重要的影响,最佳脱氯温度为800℃左右;吸收剂粒径越小,脱氯效率越高;随着Ca/Cl值的增大脱氯率增大,但增加的速度却趋于平缓,所得最佳Ca/Cl值为2.5~3。