Insights into metals in individual fine particles from municipal solid waste using synchrotron radiation-based micro-analytical techniques

Excessive inter-contamination with heavy metals hampers the application of biological treatment products derived from mixed or mechanically-sorted municipal solid waste (MSW). In this study, we investigated fine particles of < 2 mm, which are small fractions in MSW but constitute a significant component of the total heavy metal content, using bulk detection techniques. A total of 17 individual fine particles were evaluated using synchrotron radiation-based micro-X-ray fluorescence and micro-X-ray diffraction. We also discussed the association, speciation and source apportionment of heavy metals. Metals were found to exist in a diffuse distribution with heterogeneous intensities and intense hot-spots of < 10 μm within the fine particles. Zn-Cu, Pb-Fe and Fe-Mn-Cr had significant correlations in terms of spatial distribution. The overlapped enrichment, spatial association, and the mineral phases of metals revealed the potential sources of fine particles from size-reduced waste fractions (such as scraps of organic wastes or ceramics) or from the importation of other particles. The diverse sources of heavy metal pollutants within the fine particles suggested that separate collection and treatment of the biodegradable waste fraction (such as food waste) is a preferable means of facilitating the beneficial utilization of the stabilized products.     

Synergistic effect of ozonation and ionizing radiation for PVA decomposition

Ozonation and ionizing radiation are both advanced oxidation processes (AOPs) without chemical addition and secondary pollution. Also, the two processes'' efficiency is determined by different pH conditions, which creates more possibilities for their combination. Importantly, the combined process of ozonation and ionizing radiation could be suitable for treating wastewaters with extreme pH values, i.e., textile wastewater. To find synergistic effects, the combined process of ozonation and ionizing radiation mineralization was investigated for degradation of polyvinyl alcohol (PVA) at different pH levels. A synergistic effect was found at initial pH in the range 3.0–9.4. When the initial pH was 3.0, the combined process of ozonation and ionizing radiation gave a PVA mineralization degree of 17%. This was 2.7 times the sum achieved by the two individual processes, and factors of 2.1 and 1.7 were achieved at initial pH of 7.0 and 9.4, respectively. The combined process of ozonation and ionizing radiation was demonstrated to be a feasible strategy for treatment of PVA-containing wastewater.     

热沉技术在高低温低气压试验箱中的应用

在高低温低气压试验中,由于空气稀薄,其温度均匀性试验已经无法用空气对流来实现了,只能通过的辐射和传导来实现和达到试验温度的均匀。在这种试验状况下,往往试验所得的温度、湿度的均匀性偏差很大。要实现较好的温度均匀性十分困难。我们将高真空领域中的热沉技术即辐射换热方式,运用到高(低)温低气压试验箱中,通过多个几何平面的辐射和传导,达到较为理想的试验参数。     

GSM移动通信基站电磁辐射环境影响分析

本文阐述了电磁辐射的相关理论、电磁辐射环境的评价标准以及基站的工作原理,对电磁环境进行了理论预测,对不同的天线增益下的电磁辐射功率密度值进行了计算,得到了在天线增益15dBi、17dBi和18dBi三种情况下与天线不同直线距离的预测点的功率密度预测值,并对功率密度预测值进行了分析。     

对定标用标准紫外辐射光源性能指标的探讨

紫外辐射是模拟环境条件测试的重要组成部分,对紫外辐射强度、剂量等的定标对于老化耐久实验数据的准确性和可靠性具有重要意义。本文通过实验手段对目前常见的定标用紫外标准光源的技术指标进行分析,同时对该类光源的性能指标未来的改进方向进行探讨,并提出了改进设计方案。     

Effect of Tinospora cordifolia on the reduction of ultraviolet radiation‐induced cytotoxicity and DNA damage in PC12 cells

The safety of Tinospora cordifolia and its potential to protect against ultraviolet radiation‐induced cytotoxicity and DNA damage in PC12 cells were investigated. To evaluate the safety of T. cordifolia, cell viability and agarose gel electrophoresis were carried out using PC12 cells treated with 0 to 100 μg mL^?1 of methanol extract of T. cordifolia. T. cordifolia extracts did not show cytotoxicity ranging 0 to 100 μg mL^?1. In addition, T. cordifolia extracts significantly increased cell viability at 1 ng, 10 ng and 1 μg mL^?1 concentrations in serum‐deprived medium compared to control. To confirm the protective role against UV‐induced damage, PC12 cells alone or in the presence of 10 ng, 100 ng, or 1 μg mL^?1 of T. cordifolia extract were exposed to 250, 270 and 290 nm of UV radiation, which corresponded to doses of 120, 150 and 300 mJ cm^?2, respectively. Treatment with T. cordifolia extracts significantly increased the cell survival rate irradiated at 290 nm. In addition, T. cordifolia extracts significantly reduced cyclobutane pyrimidine dimer formation induced by UV irradiation at all wavelengths. In conclusion, T. cordifolia is not toxic and safe for cells. Our findings can support its application as phototherapy in the medical sector.     

放射源在线监控系统设计与应用

为了防止在使用放射源时发生脱落、丢失、超标使用、私自转移等情况,最大限度避免辐射安全事故,有必要设计建立放射源在线监控系统,对放射源放射性指标(辐射剂量率)及所处位置(经纬度)实行连续的自动监测。并通过各级监管平台设置放射源超标、异动等报警程序,全面提升放射源科学监管水平。     

紫外辐射对小球藻混凝效果作用途径探讨

针对藻类在常规水处理过程中难以被有效去除的现状,采用紫外辐射对藻类混凝过程进行强化处理.结果表明,随着紫外照射时间的增加,混凝后对藻细胞和浊度的去除均呈先上升后下降的趋势,并在照射50 min时达到最大值.PAC(聚合氯化铝)投加量为5 mg·L~(-1)时,照射样的除藻率和去浊率达到最大,分别比空白样高20.1%和18%左右.pH值在6~9范围内,紫外辐射强化混凝效果的变化较小.溶液pH=8、紫外照射50 min,混凝后的除藻率和去浊率分别达到了93.5%和90.6%.此时,藻细胞Zeta电位最大,同时释放出藻黏液,有利于混凝沉降.而当紫外照射超过60 min后,出现细胞膜破裂,胞内有机物渗出,使得溶液中的有机物浓度急剧上升,Zeta电位开始下降,不利于后续混凝的进行.     

气象因素对香港地区臭氧污染的影响

基于2000~2015年香港地区的臭氧监测数据和气象数据,分析了香港的臭氧污染特征及气象因素对臭氧污染的影响.结果表明:(1)香港地区臭氧浓度呈现明显的季节变化特征,其中秋季春季冬季夏季,臭氧超标日集中在夏季和秋季,超标日发生在冬季和春季的情形极少.(2)2000~2015年香港臭氧日最大8h平均浓度(MDA8)年均浓度呈增长趋势,平均增长速率为0.77μg·(m3·a)-1,臭氧MDA8第90百分位数浓度同样呈增长趋势,增长速率为1.49μg·(m3·a)-1.(3)较高的气温是香港地区臭氧污染发生的必要条件,气温越高越容易导致更高浓度的臭氧污染.(4)绝大多数情况下,臭氧浓度与相对湿度间呈负相关关系,相对湿度越高,香港地区的臭氧MDA8平均浓度及第90百分位数浓度均会降低.(5)当香港发生臭氧污染时,盛行风往往从偏北风或偏东风转为偏西风.随着风速的增大,臭氧平均浓度变化不大,但是臭氧第90百分位数浓度会明显降低.(6)降水和云量是影响臭氧浓度的重要因素,连续多日的无雨或少雨天气是臭氧污染事件发生的必要条件,而随着云量的增加,臭氧平均浓度和第90百分位数浓度会持续降低.(7)在太阳总辐射量≤20 MJ·m-2或日照时长≤10 h的情况下,臭氧浓度与太阳辐射及日照时长呈正相关关系.然而,在太阳辐射强烈的情况下(太阳总辐射量 20 MJ·m-2或日照时长 10 h),随着太阳辐射增强或日照时长的增加地面臭氧浓度反而降低,这是因为太阳辐射强烈的情况常出现在雨后天晴的背景下,并盛行来自海洋的偏南风,使得臭氧污染不易形成.(8)香港臭氧超标日的出现往往伴随着一系列气象条件的共同改变,包括晴天少雨、辐射增强、边界层高度增加、相对湿度降低、风速变小以及气温升高等气象特征,污染结束则伴随着相反的气象变化.