煤炭自燃指标性气体确定的实验研究

矿井火灾是矿井五大灾害之一,煤炭自燃则是矿井火灾最主要的起因。为了了解煤炭氧化、自燃规律,本文采用TG-DSC技术研究了不同煤种在水分蒸发、吸氧增重、受热分解及燃烧等不同氧化阶段的氧化特征值;并采用TG-DSC-GC联用技术研究了不同煤种在整个氧化阶段的气体产物生成规律及其特征。在煤的低温氧化阶段,找出了CO等可作为判别煤自燃的指标性气体及C2H4等辅助指标性气体;并得出了各煤种氧化阶段的耗氧规律。     

炼钢精炼渣气固碳酸化反应吸附CO2

采用炼钢精炼渣,通过气固碳酸化反应吸附CO₂,考察了不同吸附温度下精炼渣对纯CO₂和模拟高炉煤气中CO₂的吸附能力。实验结果表明：吸附温度对精炼渣吸附CO₂反应有显著的影响,升高温度可以提高精炼渣对CO₂的吸附能力;在400 ℃时,精炼渣吸附纯CO₂和模拟高炉煤气中CO₂的量分别为4.7 mg/g和9.8 mg/g;吸附温度升高到500 ℃和550 ℃时,精炼渣对纯CO₂的吸附能力强于高炉煤气中CO₂;在550 ℃时,精炼渣吸附纯CO₂和模拟高炉煤气中CO₂的量达到最高,分别为14.7 mg/g和12.9 mg/g。     

超润湿性油水分离膜的研究进展

近年来,根据仿生原理,科研人员通过在材料表面构建微纳米结构成功研制出超润湿性材料,并将其用于含油污水的处理,展示出巨大的应用潜力。本文综述了以金属网、有机微滤膜为基材,改性制备超亲水/超疏油和超疏水/超亲油油水分离膜的方法;总结了这些超润湿性材料在分离含油污水方面的优势、劣势及发展现状;展望了超润湿性油水分离膜领域的发展趋势。指出,超亲水/水下超疏油膜分离材料是未来重要的研究方向。     

电子制冷预浓缩仪-气相色谱-质谱法测空气中含硫化合物

建立电子制冷预浓缩仪-气相色谱-质谱法测定空气中10种含硫化合物的方法。经考察不同采样容器、优化预处理条件、研究样品保存等获得了最佳实验条件,并通过实际样品的测定,考察了方法的适用性。结果表明:硫化氢、甲硫醇和乙硫醇3种高活性含硫化合物校准曲线线性回归系数在0.990以上,另外7种含硫化合物在0.995以上;高、中、低空白加标样品相对标准偏差均为9.5%以内,乙硫醇由于具有高活性和吸附性,低浓度空白加标回收率为63%,其余组分回收率范围为83%~110%;当进样体积为400 mL时,各目标化合物的方法检出限为0.2×10^-3~1.1×10^-3 mg/m³。分析污水处理厂无组织排放监控点的空气结果显示,该方法具有较低的检出限及较强的抗干扰能力,能较好地满足目前监测工作的要求。     

Experimental investigation on the effect of liquid phase and vapor phase separation over performance of falling film evaporator

Energy, cost, and environmental concerns play a vital role in understanding governing parameters of distributor design in falling film evaporators. Distributor design is a hidden parameter in many experimental papers. The uniform distribution of liquid refrigerant over the tube bundle mostly depends on two-phase liquid refrigerant and vapor refrigerant. This work conducted experiments with two distribution systems with and without separation of liquid-vapor refrigerant after expansion valve for the same evaporator capacity with R134a as a refrigerant. Results reveal that; separating vapor refrigerant has a positive impact on the approach of the evaporator with an open system distributor arrangement. The highest delta T and lowest practice are found at a heat flux of 13.97 kW/m² with an available system distributor compared to a closed system with a heat flux of 14.25 kW/m². The open system arrangement in the distributor is the novel parameter for distributor design, ensuring uniform distribution with minimum pressure drop and dry suction. An open system distributor has an average 16.1% capacity increase over a closed system. The experimental analysis helps to understand different parameters for the design of distributors in falling film evaporators for uniform distribution.     

A discussion to promote global sustainability techniques for motivating plastic waste to minimize carbon footprints

This paper emphasizes the significant challenges facing the sustainable environment, including managing and handling plastic waste and reducing carbon footprints. To tackle these challenges, it is essential to identify people's awareness levels of waste handling techniques and their pro-environmental behaviors. The study focuses on Guwahati, one of the most important cities in Northeast India, which generates increasing plastic waste daily. The paper aims to identify the factors contributing to the reduction of carbon footprints resulting from plastic waste management activities. The data collected from 1326 respondents was analyzed using factor analysis, and the reliability of the dataset was confirmed using Cronbach's alpha (0.84 for the awareness level of waste management techniques and 0.780 for the prevalent mode of plastic waste management techniques). KMO (0.796), Bartlett's test of sphericity (p < 0.001), and determinant score (0.019) were used to assess the data adequacy and factorability of the dataset, and the results were found to be satisfactory. Principal component analysis, exploratory factor analysis, and varimax orthogonal rotation method were used to identify high-loaded factors by reducing the number of variables. The results showed that two highly loaded components, namely awareness level of waste management techniques (AWMT) and prevalent mode of plastic waste management techniques (PWMT), explained 27.53% and 24.34% of the total variance, respectively, with eigenvalues of 3.35 and 2.88. The regression model confirmed the statistical significance of these factors (p < 0.001) and their relationship with the dependent variable, greenhouse reduction (GHGR). The study proposes that minimizing carbon footprints in the environment can be achieved by focusing on a limited number of controllable factors such as AWMT and PWMT. This study provides valuable insights to the authorities in controlling waste generation and achieving a pollution-free environment.     

软锰矿浆烟气脱硫反应器试验研究

研究了喷射鼓泡反应器 (JBR)的桨叶直径、桨叶埋深和气体喷射管分布等结构参数对脱硫率和锰浸出率的影响 ,从而优化了反应器结构。     

旋流气浮除油装置预处理含油污水

在河南油田开展旋流气浮除油装置的现场试验,考察进水流量和曝气量对旋流气浮除油装置除油效果的影响。试验结果表明:在进水流量为1.8 m³/h、曝气量为0.5 L/min时,除油率最高达到96.03%;在不添加任何药剂的条件下,装置处理效果稳定;连续运行6 d内,进水含油量为174.57~1 193.15 mg/L时,出水含油量可以保持在137.38 mg/L以下,除油率为58.58%~94.53%。     

Ce/Zr系列催化剂上碳颗粒物燃烧行为

分别在TG和TPO上考察了CeO₂,ZrO₂及不同Ce/Zr比的CexZr1-xO₂固溶体催化剂上soot的燃烧性能,同时考察了反应气氛对活性的影响.结果表明:Ce基催化剂能明显降低soot的起燃温度,Ce/Zr比的不同导致Ce_xZr_1-xO₂催化剂性能的差异.反应的速度控制步骤随O₂浓度的不同而改变;H₂O对Ce_0.5Zr_0.5O₂上soot的氧化活性基本没有影响;由于NO氧化产生的NO₂具有更强的的氧化能力,因此NO对soot的燃烧具有促进作用,起燃温度降低了30℃.催化剂上的β氧种参与了soot燃烧过程.     

纳滤膜分离技术在安全饮用水保障中的应用

纳滤膜分离技术在饮用水制备方面具有独特的作用,是保障安全饮用水生产的有效方法。本文详细综述了国内外纳滤膜技术在饮用水生产中应用研究的最新进展,以及纳滤膜对地表水或地下水中存在的各种无机、有机污染物的分离特性。