Temperature Effect on Migration of Zn and Cd Through Natural Clay

To investigate the effect of temperature on effective diffusion coefficients and retardation factors for Zn and Cd, combined diffusion and sequential extraction analyses were conducted at 15 ^˚C and 55 ^˚C. The effective diffusion coefficients of the metals increased up to ten times according to the increased temperature. On the other hand, the effect of temperature on the retardation factor depended on the retention mechanisms of the metals. The distribution coefficient for Zn, which was mainly partitioned in the carbonate phase, increased up to two times with the increase in temperature. On the other hand, the distribution coefficient for Cd, which was mainly partitioned in the exchangeable phase, was hardly affected by the temperature change. Results of combined diffusion and sequential extraction analysis showed that the effect of temperature on the heavy metals’ (Zn and Cd) migration through the compacted natural clay was influenced by the combined effects of the diffusion coefficient and the retardation factor. Additionally, we could also observe the change in retention mechanism for the metals with the change in pore water concentration.     

Comparison of Nitrate Levels in Raw Water and Finished Water from Historical Monitoring Data on Iowa Municipal Drinking Water Supplies

Nitrate contamination of water sources is a concern where large amounts of nitrogen fertilizers are regularly applied to soils. Ingested nitrate from dietary sources and drinking water can be converted to nitrite and ultimately to N-nitroso compounds, many of which are known carcinogens. Epidemiologic studies of drinking water nitrate and cancer report mixed findings; a criticism is the use of nitrate concentrations from retrospective drinking water data to assign exposure levels. Residential point-of-use nitrate data are scarce; gaps in historical data for municipal supply finished water hamper exposure classification efforts. We used generalized linear regression models to estimate and compare historical raw water and finished water nitrate levels (1960s--1990s) in single source Iowa municipal supplies to determine whether raw water monitoring data could supplement finished water data to improve exposure assessment. Comparison of raw water and finished water samples (same sampling date) showed a significant difference in nitrate levels in municipalities using rivers; municipalities using other surface water or alluvial groundwater had no difference in nitrate levels. A regional aggregation of alluvial groundwater municipalities was constructed based on results from a previous study showing regional differences in nitrate contamination of private wells; results from this analysis were mixed, dependent upon region and decade. These analyses demonstrate using historical raw water nitrate monitoring data to supplement finished water data for exposure assessment is appropriate for individual Iowa municipal supplies using alluvial groundwater, lakes or reservoirs. Using alluvial raw water data on a regional basis is dependent on region and decade.     

Characterization and Identification of the Sources of Chromium, Zinc, Lead, Cadmium, Nickel, Manganese and Iron in Pm10 Particulates at the Two Sites of Kolkata, India

Monitoring of ambient PM₁₀ (particulate matter which passes through a size selective impactor inlet with a 50% efficiency cut-off at 10 μm aerodynamic diameter) has been done at residential (Kasba) and industrial (Cossipore) sites of an urban region of Kolkata during November 2003 to November 2004. These sites were selected depending on the dominant anthropogenic activities. Metal constituents of atmospheric PM₁₀ deposited on glass fibre filter paper were estimated using Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES). Chromium (Cr), zinc (Zn), lead (Pb), cadmium (Cd), nickel (Ni), manganese (Mn) and iron (Fe) are the seven toxic trace metals quantified from the measured PM₁₀ concentrations. The 24 h average concentrations of Cr, Zn, Pb, Cd, Ni, Mn and Fe from ninety PM₁₀ particulate samples of Kolkata were found to be 6.9, 506.1, 79.1, 3.3, 7.4, 2.4 and 103.6 ng/m³, respectively. The 24 h average PM₁₀ concentration exceeded national ambient air quality standard (NAAQS) as specified by central pollution control board, India at both residential (Kasba) and industrial (Cossipore) areas with mean concentration of 140.1 and 196.6 μg/m³, respectively. A simultaneous meteorology study was performed to assess the influence of air masses by wind speed, wind direction, rainfall, relative humidity and temperature. The measured toxic trace metals generally showed inverse relationship with wind speed, relative humidity and temperature. Factor analysis, a receptor modeling technique has been used for identification of the possible sources contributing to the PM₁₀. Varimax rotated factor analysis identified four possible sources of measured trace metals comprising solid waste dumping, vehicular traffic with the influence of road dust, road dust and soil dust at residential site (Kasba), while vehicular traffic with the influence of soil dust, road dust, galvanizing and electroplating industry, and tanning industry at industrial site (Cossipore).     

Sediment and Suspended Matter Lead Contamination in the Gulf of Kavala, Greece

Sediment and suspended particulate matter samples from 24 stations in the Gulf of Kavala have been examined for lead contamination. Grain size analysis and organic matter content were also performed. Total – anthropogenic sediment lead concentrations and enrichment factors at stations close to harbors and chemical industries were found higher (up to 209–135μg/g and 4.12 respectively), in relation to concentrations from the rest of the coastal zone. In the above areas, increased suspended particulate lead in the bottom of the water column was also recorded (up to 109μg/g). Total sediment lead concentrations composed of high natural Pb background increased with decreasing grain size, suggesting their association with the fine fractions of the sediments (31.1–66.0% mud presence) and the organic matter content (6–9% higher values). Overall, higher total lead concentrations in the sediments, determined by this work, appear to be significantly different from those reported for the Gulf of Kavala in previous studies and similar to those detected in other highly contaminated eastern Mediterranean coastal areas.     

Water Quality during Development and Apportionment of Pollution from Rivers in Tapeng Lagoon, Taiwan

This work investigated water samples collected from Tapeng Lagoon, Taiwan. Factor analysis was conducted to explain the characteristics and the variation in the quality of water during the disassembly of oyster frames and fishery boxes. The result shows that the most important latent factors in Tapeng Lagoon are the ocean factor, primary productivity factor, and the fishery pollution factor. Canonical discriminant analysis is applied to identify the source of pollution in neighboring rivers outside Tapeng Lagoon. The two constructed discriminant functions (CDFs) showed markedly contribution to all discriminant variables, and that total nitrogen, algae, dissolved oxygen and total phosphate, combined in the nutrient effect factor. The recognition capacities in these two CDFs were 95.6%, 4.4%, respectively. The water quality in the Kaoping river most strongly determined that in the Tapeng Lagoon the best is. And disassembling the oyster frames and fishery boxes improves the water quality markedly. However, environmental topographic conditions indicate that strengthening stream pollution prevention and to constructing another entrance to the ocean are the best approaches for improving the quality of water in Tapeng Lagoon, especially by reducing eutrophication. These approaches and results yield useful information concerning habitat recovery and water resource management.     

Cancer and Non-Cancer Health Risk from Eating Cassava Grown in Some Mining Communities in Ghana

Food crops such as cassava, cocoyam and other tuber crops grown in mining communities uptake toxic or hazardous chemicals such as arsenic, and cadmium, from the soil. Cassava is a stable food for Ghanaians. This study evaluated human health risk from eating cassava grown in some mining communities in Ghana such as Bogoso, Prestea, Tarkwa and Tamso, which are important mining towns in the Western Region of Ghana. The study evaluated cancer and non-cancer health effects from eating cassava grown in the study areas in accordance with US Environmental Protection Agency’s Risk Assessment guidelines. The results of the study revealed the following: cancer health risk for Tamso, 0.098 (RME – Reasonable Maximum Exposure) and 0.082 (CTE – Central Tendency Exposure). This means that approximately 10 and 8 out of 100 resident adults are likely to suffer from cancer related cases by RME and CTE parameters respectively. For Prestea, we have 0.010 and 0.12, which also means that approximately 1 out of 100 and 10 resident adults out of 100 are also likely to suffer from cancer related diseases by RME and CTE parameters. The results of the study obtained were found to be above the acceptable cancer risk range of 1× 10⁻⁶ to 1× 10⁻⁴, i.e., 1 case of cancer out of 1 million or 100,000 people respectively.     

The Metallic Composition of Aerosols at Three Monitoring Sites in Korea During Winter 2002

In the present study, the distribution patterns of various metals were analyzed and compared using PM samples collected concurrently from three monitoring sites located in Korea (Seoul, Busan, and Jeju island) in December 2002. As these sites can represent metal pollution with different degrees of anthropogenic activities, their concentration levels were distinguished in a systematic manner in the order of Jeju, Busan, and Seoul. By comparing the present data sets with those measured previously from other locations in Korea and around the world, we attempted to diagnose the general status of elemental pollution on the Korean peninsula. Through an application of different statistical approaches, the major processes controlling elemental levels were assessed for each of the three study sites. The results indicated the importance of both crustal and anthropogenic sources in all sites with their relative roles varying significantly from each other. The results of the metal analysis data, when examined in relation to back trajectory analysis, confirmed that their concentration changes are affected quite sensitively with air mass movement patterns. The overall results of this study consistently indicated the contribution of a strong anthropogenic source area (e.g., China) to the observed metal concentration levels in the study area, but the strengths of such signals vary considerably across the Korean peninsula.     

An evaluation scheme for assessing the effectiveness of intersection movement assist (IMA) on improving traffic safety

Objective: Intersection movement assist (IMA) has been recognized as one of the prominent countermeasures to reduce angle crashes at intersections, which constitute 22% of total crashes in the United States. Utilizing vehicle-based sensors, vehicle-to-vehicle (V2V), and vehicle-to-infrastructure (V2I) communications, IMA offers extended vision to provide early warning for an imminent crash. However, most of IMA-related research implements their methods and strategies only in simulations, test tracks, or driving simulator studies that have quite a few assumptions and limitations and hence the effectiveness evaluations reported may not be transferable or comparable.

Methods: This study seeks to develop a generalized evaluation scheme that can be used not only to assess the effectiveness of IMA on improving traffic safety at intersections but to facilitate comparisons across similar studies. The proposed evaluation scheme utilizes the concepts of traffic conflict in terms of time-to-collision (TTC) as a crash surrogate. This approach avoids the issue of having insufficient crash frequency data for system evaluation. To measure the effectiveness of IMA on reducing traffic conflicts, a relative risk is calculated for comparing the risk of with/without using the IMA. As a proof-of-concept study, this study applied the proposed evaluation scheme and reported the effectiveness of IMA on improving traffic safety in a field operation test (FOT). Seven test scenarios were conducted at 4 intersections, and a total of 40 participants were recruited to use the IMA for 6 months.

Results: It was estimated that IMA users have 26% fewer conflicts with TTC less than 5 s and have 15% fewer conflicts with TTC less than 4 s. However, the results vary across different sites and different definitions of conflicts in terms of TTC.

Conclusions: Overall, IMA is promising to effectively reduce angle crashes related to sight obstruction and has potential to reduce not only crash frequency but crash severity.     

The sex disparity in risky driving: A survey of Colombian young drivers

Objective: The overrepresentation of young drivers in poor road safety outcomes has long been recognized as a global road safety issue. In addition, the overrepresentation of males in crash statistics has been recognized as a pervasive young driver problem. Though progress in road safety evidenced as a stabilization and/or reduction in poor road safety outcomes has been made in developed nations, less-developed nations contribute the greatest road safety trauma, and developing nations such as Colombia continue to experience increasing trends in fatality rates. The aim of the research was to explore sex differences in self-reported risky driving behaviors of young drivers, including the associations with crash involvement, in a sample of young drivers attending university in Colombia.

Methods: The Spanish version of the Behaviour of Young Novice Drivers Scale (BYNDS-Sp) was applied in an online survey to a sample of 392 students (225 males) aged 16–24 years attending a major university. Appropriate comparative statistics and logistic regression modeling were used when analyzing the data.

Results: Males reported consistently more risky driving behaviors, with approximately one quarter of all participants reporting risky driving exposure. Males reported greater crash involvement, with violations such as speeding associated with crash involvement for both males and females.

Conclusion: Young drivers in Colombia appear to engage in the same risky driving behaviors as young drivers in developed nations. In addition, young male drivers in Colombia reported greater engagement in risky driving behaviors than young female drivers, a finding consistent with the behaviors of young male drivers in developed nations. As such, the research findings suggest that general interventions such as education, engineering, and enforcement should target transient rule violations such as speeding and using a handheld mobile phone while driving for young drivers in Colombia. Future research should investigate how these interventions could be tailored specifically for the Colombian cultural context, including how their effects can be evaluated, prior to implementation.     

A comparative study of vocational education and occupational safety and health training in China and the UK

In order to enhance Chinese workers’ occupational safety awareness, it is essential to learn from developed countries’ experiences. This article investigates thoroughly occupational safety and health (OSH) in China and the UK; moreover, the article performs a comparison of Chinese and British OSH training-related laws, regulations and education system. The following conclusions are drawn: China’s work safety continues to improve, but there is still a large gap compared with the UK. In China a relatively complete vocational education and training (VET) system has been established. However, there exist some defects in OSH. In the UK, the employer will not only pay attention to employees’ physiological health, but also to their mental health. The UK’s VET is characterized by classification and grading management, which helps integrate OSH into the whole education system. China can learn from the UK in the development of policies, VET and OSH training.