松散煤体渗流传热试验装置研制

为研究松散煤体低温氧化及通风供氧下的渗流传热规律,研发了渗流传热试验装置。试验装置由气体加湿系统、气体加热系统、煤样反应系统、数据采集系统和安全保护系统组成;本装置可实现自动加湿、控温、自动采集数据及处理数据。为解决装置使用和运行中的安全问题,设计了断电保护、有害气体检测等措施,保障试验装置的安全、可靠。     

锅炉变频调速给水系统节能作用分析

变频调速在锅炉给水系统中应用，可以调节给水流量，降低能耗，减少厂用电压波动，减轻工人的劳动强度，降低操作机构的维修费用。     

A very simple yet accurate solution to the thermal explosion problem

A very simple solution to the thermal explosion problem for one-dimensional solids is presented. The solution produces analytical expressions for the criticality condition. Two different solutions are used. One solution gives higher answers than those known from exact solutions and the second solution gives lower answers. This allows bracketing the expected answer with a determined tolerance. The results obtained compare quite favorably with those obtained from known exact numerical solutions. This allows the utilization of the present method for many a practical problem with an acceptable tolerances.     

锅炉温控炉拱的设计及燃烧技术性能

论述了将小型链条炉排工业锅炉的炉拱设计成在运行中可以全量调节的结构,以适应燃用多种煤种的需要,并减少与固定拱操作有关的意外伤亡事故。这项技术有创新性,适用性和推广价值     

锅炉烟尘排放浓度超标成因分析及控制对策

分析了锅炉燃烧排出的危害人类健康的污染物烟尘及ＳＯ２超标的成因,以及长庆油田燃煤锅炉烟道气的监测结果。提出了控制锅炉烟尘排放浓度的对策及消烟措施。例如：推行煤炭洗选,改进燃料结构,限制烟尘超标的锅炉产品制造、安装,改进燃烧方式,强化炉内燃烧,改造除尘器。     

锅炉型煤质量的影响因素分析

分析了配煤组分、成型工艺条件、型料粒度等方面对工业型煤质量的影响，指标合理确定惰性组分含量、成型水分和型料粒度组成是型煤生产的关键，并对实际生产提供帮助。     

基于机器学习的电热防除冰表面温度变化趋势预测

针对飞机部件周期控制律电加热防除冰的应用,提出基于机器学习以预测电加热防除冰表面温度的变化趋势.依靠大型结冰风洞及其电加热防除冰控制系统完成防除冰试验,获得有效的试验数据,以通、断电周期为分割单元,将试验数据划分成验证集和训练集.根据电热防除冰过程的换热情况,构建样本的特征参数,利用机器学习的有监督学习方式,选择KNN近邻回归算法和局部线性加权回归算法预测温度变化率,再转换为温度,得到的温度变化与测量数据的线性相关性达到80％以上的高相似度结果,表明使用机器学习可快速预测电热防除冰部件的表面温度变化趋势,且不同的回归算法针对模型不同测温点位置的预测效果存在差异.     

燃煤手烧炉有害气体生成特征研究

本文对燃煤手烧炉烟气生成特征进行了分析和研究 ,对燃烧过程二氧化硫、一氧化碳及一氧化氮等有害气体的生成规律和浓度值进行了测定和分析     

中国山东电网燃煤锅炉NOx排放状况和治理技术试验研究

通过对山东电网所属发电厂锅炉NOx排放状况进行调查、测试,得出锅炉NOx排放量与煤种、炉型、燃烧器型式、运行中空气过剩系数、负荷等的关系.结果表明,山东省火力发电厂50 MW及以上容量机组2003年的NOx排放总量超过40万t(按NO2计算).控制和治理NOx排放已成为刻不容缓的重要工作.     

Effect of soil layering on NAPL removal behavior in soil-heated vapor extraction

Soil heating has been proposed as a method to enhance the vapor extraction of NAPLs from contaminated soils. Three-dimensional fluid flow and heat transfer simulations have been performed for soil-heated vapor extraction to determine the transient system performance for a hypothetical configuration. Soil layering has been considered in evaluation of the initial non-aqueous phase liquid (NAPL) distribution and in evaporation and transport to the vapor extraction location. Results from this layered model are compared with results for a homogeneous system with an initially uniform NAPL, indicating the influence of layering, the initial NAPL distribution, the type of NAPL, and the possibility of enhanced vapor diffusion. Not only is the NAPL removal time reduced significantly with the addition of heat, but the uncertainty in the removal time owing to a number of difficult to characterize in situ factors, such as layering and the initial NAPL distribution, is much less than for standard soil vapor extraction without heating, owing to the rise in temperature and increase in NAPL vapor pressure with time.