为了提高能源回收效率,采用大米、土豆、生菜、瘦肉、花生油和榕树叶作为实验原料,模拟有机垃圾中普遍存在的淀粉、膳食纤维、蛋白质、脂肪和木质纤维类成分,进行厌氧发酵产氢以及对其剩余物厌氧发酵产甲烷.结果表明.在厌氧发酵产氢阶段,整个过程没有甲烷生成,大米、土豆、生菜、瘦肉、花生油和榕树叶的氢气产率分别为125、103、35、0、5和0 mL g-1(VS),能源回收效率分别为7.9%、6.8%、1.9%、0、0.1%和0.大米、土豆和生菜的氢气浓度分别为34%～59%、41%～56%和37%～70%,整个产氢阶段没有甲烷生成.在厌氧发酵产甲烷阶段,上述原料的甲烷产率分别为232、237、148、278、866和50 mL g-1(VS),生物气中甲烷含量分别为42%～70%、57%～71%、73%～77%、59%～73%、68%～80%和54%～74%.厌氧发酵联产氢气和甲烷整个过程上述原料的能源回收效率分别为56.3%、58.4%、28.8%、39.2%、81.2%和8.8%,总COD去除率分别为72.30%、81.70%、32.63%、47.59%、97.46%和11.29%.图4表5参35 相似文献
The effects of nitrate on fermentative hydrogen production and soluble metabolites from mixed cultures were investigated by varying nitrate concentrations from 0 to 10 g N/L at 35°C with an initial pH of 7.0. The results showed that the substrate degradation rate, hydrogen production potential, hydrogen yield, and average hydrogen production rate initially increased with increasing nitrate concentrations from 0 to 0.1 g N/L, while they decreased with increasing nitrate concentrations from 0.1 to 10 g N/L. The maximum hydrogen production potential of 305.0 mL, maximum hydrogen yield of 313.1 mL/g glucose, and maximum average hydrogen production rate of 13.3 mL/h were obtained at a nitrate concentration of 0.1 g N/L. The soluble metabolites produced by the mixed cultures contained only ethanol and acetic acid (HAc) without propionic acid (HPr) and butyric acid (HBu). This study used the Modified Logistic model to describe the progress of cumulative hydrogen production in batch tests. A concise model was proposed to describe the effects of nitrate concentration on average hydrogen production rate. 相似文献
Hexavalent chromium contamination in water is an issue of huge concern due to its use at a high scale, toxicity and non-biodegradability. Biosorption is a cost effective and unconventional strategy for the elimination of Cr(VI). Here, a novel biosorbent Senna siamea seed pod biomass and its chemically activated form have been investigated for the elimination of hexavalent chromium from aqueous solution. The biosorbent was characterized by using BET, FTIR, FESEM-EDX and TGA techniques. Parameters controlling the biosorption process were optimized as pH 2.0, temperature 30°C, initial Cr(VI) concentration 500?mg/L, biosorbent dose 0.5?g/L. Optimized contact time was 210 and 180 min for pristine biomass and activated carbon, respectively. Langmuir isotherm correlated well with experimental data revealing that the biosorption occurred in monolayer pattern. Maximum biosorption capacity calculated by Langmuir biosorption isotherm was 119.18 and 139.86?mg/g for S. siamea pristine biomass and activated carbon, respectively. Pseudo-second order kinetic model correlated well with experimental data. Thermodynamic studies suggested that the biosorption process occurs in a non-spontaneous, stable and endothermic manner. These interesting findings on Cr(VI) biosorption by S. siamea seed pod biomass and S. siamea zinc chloride activated carbon vouches for its potential application as an unconventional biosorbent. 相似文献
Investigation of demulsification of polybutadiene latex (PBL) wastewater by polyaluminum chloride (PAC) indicated that there was an appropriate dosage range for latex removal. The demulsification mechanism of PAC was adsorption-charge neutralization and its appropriate dosage range was controlled by zeta potential. When the zeta potential of the mixture was between -15 and 15 mV after adding PAC, the demulsification effect was good. Decreasing the latex concentration in chemical oxygen demand (COD) from 8.0 g/L to 0.2 g/L made the appropriate PAC dosage range narrower and caused the maximum latex removal efficiency to decrease from 95% to 37%. Therefore, more accurate PAC dosage control is required. Moreover, adding 50 mg/L sulfate broadened the appropriate PAC dosage range, resulting in an increase in maximum latex removal efficiency from 37% to 91% for wastewater of 0.2 g COD/L. The addition of sulfate will favor more flexible PAC dosage control in demulsification of PBL wastewater.
