An Assessment on Variation of Sulphur Dioxide and Particulate Matter in Erzurum (Turkey)

Sulphur dioxide and PM₁₀ levels are investigated in Erzurum during the periods of 1990–2000 heating season to assess air pollution level. For that reason, emissions of sulphur dioxide and particulate matter were calculated by using consumption of fuels and Turkish emission factors. These emission values were evaluated together with air pollution levels, which were measured at six stations in Erzurum atmosphere during 1990–2000 winter periods. Results reveal that in 1990–1994 heating period, there is an increasing trend in the emissions and air pollution levels over Erzurum, and the air quality limits were not met. The daily 24 h limit (short-term limit) was exceeded 127 days in 1992–1993 winter period. The reason for this increase was found to be the switching to use of low-quality fossil fuels instead of cleaner ones. Results also indicated that there was a considerable decrease in emissions of air pollutants and air pollution levels after 1995. This can be explained by the consumption of more high-quality fossil fuels. The correlation coefficient of SO₂ with PM₁₀ is obtained as r² = 0.85, which is a high value supporting the idea that both pollutants are emitted from the same source.     

Multipoint source method in air pollution modelling of cold start emission

The paper presents a new method of air pollution modelling on a micro scale. For estimation of concentration of car exhaust pollutants, each car is treated as an instantaneous moving emission source. This approach enables us to model time and spatial changes of emission, especially during cold and cool start of an engine. These stages of engine work are a source of significant pollution concentration in urban areas. In this work, two models are proposed: one for the estimation of emission after cold start of the engine and another for the prediction of pollutant concentration. The first model (defined for individual exhaust gas pollutants) enables us to calculate the emission as a function of time after the cold or cool start, ambient temperature and average speed of motion. This model uses the HBEFA database. The second mathematical model is developed in order to calculate the pollutant dispersion and concentrations. The finite volume method is applied to discretise the set of partial differential equations describing wind flow and pollutant dispersion in the domain considered. Models presented in this paper can be called short-term models on a small spatial scale. The results of numerical simulation of pollutant emission and dispersion are also presented.     

Removal of high concentrated ammonia nitrogen from landfill leachate by landfilled waste layer

The landfill of municipal solid waste(MSW) could be regarded as denitrification reactor and involved in ammonia nitrogen biological removal process. In this research, the process was applied to municipal solid waste collected in Shanghai, China, which was characterized by high food waste content. The NH4^ removal efficiency in the system of SBR nitrifying reactor followed by fresh and matured landfilled waste layer in series was studied. In the nitrifying reactor, above 90% of NH4^ in leachate was oxidized to NO2^- and NO3^- . Then high concentrated NO2^- and NO3^- were removed in the way of denitrification process in fresh landfilled waste layer. At the same time, degradation of fresh landfilled waste was accelerated. Up to the day 120, 136.5 gC/(kg dry waste) and 17.9 gN/(kg dry waste) were converted from waste layer. It accounted for 50.15 % and 86.89 % of the total carbon and nitrogen content of preliminary fresh waste, which was 4.42 times and 5.17 times higher than that of reference column respectively. After filtering through matured landfilled waste, BOD5 concentration in leachate dropped to below 100 mg/L, which would not affect following nitrification adversely. Because the matured landfilled waste acted as a well methanogenic reactor, 23% of carbon produced accumulatively from fresh landfilled waste degradation was converted into CH4.     

GHG emission reductions and costs to achieve Kyoto target

Emission projection and marginal abatement cost curves (MACs) are the central components of any assessment of future carbonmarket, such as CDM (clean development mechanism) potentials, carbon quota price etc. However, they are products of very complex,dynamic systems driven by forces like population growth, economic development, resource endowments, technology progress and so on. The modeling approaches for emission projection and MACs evaluation were summarized, and some major models and their results were compared.Accordingly, reduction and cost requirements to achieve the Kyoto target were estimated. It is concluded that Annex I Parties‘ total reduction requirements range from 503--1304 MtC with USA participation and decrease significantly to 140--612 MtC after USA‘ s withdrawal. Total costs vary from 21--77 BUSD with USA and from 5--36 BUSD without USA if only domestic reduction actions are taken. The costs would sharply reduce while considering the three flexible mechanisms defined in the Kyoto Protocol with domestic actions‘ share in the all mitigation strategies drons to only 0--16%.     

On the determination of nitrous oxide emission factor during biomass burning

ＯｎｔｈｅｄｅｔｅｒｍｉｎａｔｉｏｎｏｆｎｉｔｒｏｕｓｏｘｉｄｅｅｍｉｓｓｉｏｎｆａｃｔｏｒｄｕｒｉｎｇｂｉｏｍａｓｓｂｕｒｎｉｎｇＣａｏＭｅｉｑｉｕ；ＺｈｕａｎｇＹａｈｕｉ（ＲｅｓｅａｒｃｈＣｅｎｔｅｒｆｏｒＥｃｏ－ＥｎｖｉｒｏｎｍｅｎｔａｌＳｃｉ...     

猪场粪便微生物处理技术研究

猪场粪便是重要污染源，但又是一类尚未充分利用的资源。采用生态工程与资源化综合技术处理猪场粪便，固态粪经堆肥发酵后转化成优质有机肥，粪水经厌氧产沼、光合细菌液肥化、水生植物氧化塘多级处理和资源化利用，出水可达排放标准，为猪场粪便的处置提供了一种可供选用的技术。     

用S型皮托管测固定污染源排气参数的方法探讨

针对固定污染源排气监测实际工作用S型皮托管测定静压方法有争议的问题进行了理论分析和低速风洞试验。结果表明,用S型皮托管测固定污染源排气静压的平行法和垂直法二方法都在不影响排气量和污染物排放量测定结果的范围内;用全压与平行法静压差作为动压来计算流速可影响较大。     

An overview on industrial waste management in China

Ａｎｏｖｅｒａｌｌｄｅｓｃｒｉｐｔｉｏｎｏｆｉｎｄｕｓｔｒｉａｌｗａｓｔｅｗａｓｇｉｖｅｎｆｒｏｍｇｅｎｅｒａｔｉｏｎ；ｔｒｅａｔｍｅｎｔ，ｄｉｓｐｏｓａｌａｎｄｅｍｉｓｓｉｏｎａｎｄｃｏｍｐｒｅｈｅｎｓｉｖｅｕｔｉｌｉｚａｔｉｏｎ．Ｉｎｓｐｉｔｅｏ...     

重庆城市餐厨垃圾管理对策的初步研究

餐厨垃圾对环境的污染和人们身心健康的危害日益显现,重庆市对餐厨垃圾的统一管理与处置基本还处于空白状态.本文介绍了国内外餐厨垃圾管理的政策和措施,剖析重庆城市餐厨垃圾污染的现状及原因,进而提出全市餐厨垃圾管理的总体思路,并着重从健全法律法规体系、转变政府管理职能、建立市场化机制及引导公众参与等方面提出了相应的对策建议.     

城市生活垃圾理化性质的动态特性分析

对太原市城市生活垃圾的组成、化学元素及重金属等进行了1年(每月2次)共24次的分析。结果表明,太原市生活垃圾的组成在焚烧过程中,能产生低位热值(Q低)的有机物占(44.28±2.24)％,不产生低位热值的无机物占(13.94±2.01)％,混合物(破碎的动植物碎片及粘附在其上面的灰、土、砂)占(43.36±8.67)％。垃圾中可燃物比例较高,水分含量较低,有利于焚烧和热解,低位热值(Q低)平均值为(5590.8±1252.3)kJ/kg,但低位热值随季节变化较大。垃圾中化学元素硫(S)、氯(Cl)、氮(N)、氢(H)、碳(C)、氧(O)的年平均值分别为(0.20±0.13)％、(0.48±0.11)％、(0.87±0.18)％、(2.56±0.76)％、(30.78±4.06)％、(16.42±5.17)％,与其他城市相比,S、N、Cl的含量较高。垃圾中的重金属铅(Pb)、镉(Cd)的年平均值分别为41.94mg/Kg和1.806mg/kg;汞(Hg)含量变化较大。焚烧后的灰渣中,Pb部分挥发,Cd得到富集,但几乎无Hg检出。