一起瓦斯事故后的思考

介绍了峰峰集团公司小屯矿14443回采工作面基本情况和瓦斯事故发生及处理经过,分析了事故原因,针对该事故从5个方面提出值得思考的问题.     

不同瓦斯压力下煤体力学特性试验研究

为研究瓦斯对煤体力学特性的影响,设计不同瓦斯压力条件下煤体单轴压缩试验,研究煤样力学参数及变形特征随瓦斯压力的变化趋势,探讨瓦斯对煤体力学性质的影响机制,得出单轴压缩下煤样力学参数,并记录煤样的破坏形态.研究结果表明:随瓦斯压力增大,应力-应变曲线压实阶段增大,弹性阶段缩小,失稳破坏后曲线缓慢下降,抗压强度和弹性模量单...     

基于FA-BAS-ELM的海洋油气管道外腐蚀速率预测

为提高海洋油气管道外腐蚀速率预测的精度和效率,建立基于因子分析(FA)和天牛须搜索算法(BAS)的极限学习机(ELM)腐蚀速率预测模型。利用FA对影响因素数据集进行降维处理,确定预测模型的输入变量;建立ELM预测模型,并采用BAS对ELM模型的参数进行优化,避免参数取值随机性对模型预测性能的影响;以实海挂片试验为例,通过建模仿真评价模型的预测性能,并与其他模型进行对比分析。结果表明：FA-BAS-ELM预测模型的平均绝对误差(MAPE)仅为1.92%,决定系数R²高达0.994 9,相比于其他模型,该模型具有更优的预测性能。     

毛细管气相色谱法测定烟草中有机氯农药残留

研究了烟草中六六六及滴滴涕异构体含量的气相色谱分析方法.样品以石油醚 丙酮在索氏提取器中提取,提取液以浓硫酸净化.采用DB-5弹性石英毛细管柱分离样品,GC-ECD检测农药六六六、滴滴涕的残留量.方法的线性范围为2.27×10-13～7.66×10-11g;最小检测量为1.3×10-8～3.0×10-7 μg,加标平均回收率为95.3%～103.3%,RSD为2.8%～4.5%.     

光学检测法用于工业气体检测的研究

开展基于特定物质吸收光谱及其谐波检测技术的气体检测装置的实验研究.检测装置采用频率稳定措施,使激光频率始终控制在待测气体的吸收谱线上,对环境的抗干扰能力强,不会产生误判.不需要经常标定,不需要采样.     

液化天然气(LNG)瞬时泄漏扩散的模拟研究

对液化天然气泄漏扩散过程进行了分析,考虑其泄漏后发生闪蒸时的液滴夹带以及混合空气量,将闪蒸完的状态作为箱模型的初始状态,考虑空气的湿度影响建立了重气扩散过程的箱模型,并应用实例进行了验证,得出了泄漏后有火灾爆炸危险性的区域以及距离泄漏源的位置,为应急救援预案的制定提供参考,模拟结果显示了重气扩散过程中的重力沉降,空气夹带等一般特征,同时云团初始闪蒸时的液滴夹带对云团的扩散行为具有一定的影响,不能忽略.最后提出了今后的研究方向.     

煤气生产车间CO气体浓度监控技术的研究

根据某化工厂煤气生产工艺流程,研究预防CO气体泄漏引起的火灾、爆炸和中毒事故的监控系统,分析监控系统的工作原理及电路图,对CO监控技术的研究和气体传感器的研制有重要的参考价值.     

燃气爆炸作用下房屋裂缝开展的分形模拟

烯气爆炸灾害下房屋裂纹开展有的模式与受均布压力破坏时的相同,在参照实验所得混凝土裂缝的分形维数资源的基础上编制了相应的软件,利用分形插值的方法实现裂缝开展的模拟,模拟结果较好地反映了裂缝发展的真实情况,且较以往的模拟方法节约了大量存储空间。     

隐伏断裂的地气测量及其意义

传统概念的地气测量是指地下上升到地表并扩散到大气空间的天然状态气体 ,如CO2 、CH4 、Rn、Hg、H2 等。近十多年的研究证实地气还包含着新的内涵 ,即地壳岩石以及地表土壤中还存着痕量的金属与非金属气体 ,通过捕集这些气体 ,可以获得更多的深部地质构造、矿床信息。据报导 ,国内外的研究主要是在已知矿床上做的正演研究。本文是在已知隐伏断层构造上方地表 ,试验金属与非金属地气存在的可能性。     

Suspended Particulate Matter Distribution in Rural-Industrial Satna and in Urban-Industrial South Delhi

An air quality sampling program was designed and implemented to collect the baseline concentrations of respirable suspended particulates (RSP = PM₁₀), non-respirable suspended particulates (NRSP) and fine suspended particulates (FSP = PM_2.5). Over a three-week period, a 24-h average concentrations were calculated from the samples collected at an industrial site in Southern Delhi and compared to datasets collected in Satna by Envirotech Limited, Okhla, Delhi in order to establish the characteristic difference in emission patterns. PM_2.5, PM₁₀, and total suspended particulates (TSP) concentrations at Satna were 20.5 ± 6.0, 102.1 ± 41.1, and 387.6 ± 222.4 μg m⁻³ and at Delhi were 126.7 ± 28.6, 268.6 ± 39.1, and 687.7 ± 117.4 μg m⁻³. Values at Delhi were well above the standard limit for 24-h PM_2.5 United States National Ambient Air Quality Standards (USNAAQS; 65 μg m⁻³), while values at Satna were under the standard limit. Results were compared with various worldwide studies. These comparisons suggest an immediate need for the promulgation of new PM_2.5 standards. The position of PM₁₀ in Delhi is drastic and needs an immediate attention. PM₁₀ levels at Delhi were also well above the standard limit for 24-h PM₁₀ National Ambient Air Quality Standards (NAAQS; 150 μg m⁻³), while levels at Satna remained under the standard limit. PM_2.5/PM₁₀ values were also calculated to determine PM_2.5 contribution. At Satna, PM_2.5 contribution to PM₁₀ was only 20% compared to 47% in Delhi. TSP values at Delhi were well above, while TSP values at Satna were under, the standard limit for 24-h TSP NAAQS (500 μg m⁻³). At Satna, the PM₁₀ contribution to TSP was only 26% compared to 39% in Delhi. The correlation between PM₁₀, PM_2.5, and TSP were also calculated in order to gain an insight to their sources. Both in Satna and in Delhi, none of the sources was dominant a varied pattern of emissions was obtained, showing the presence of heterogeneous emission density and that nonrespirable suspended particulate (NRSP) formed the greatest part of the particulate load.