燃煤锅炉烟气氨法脱硫技术的应用

电厂燃煤锅炉烟气脱硫是减少和控制酸雨的有效手段。LS氨法喷雾脱硫技术具有脱硫效率高、环境效益好、资源综合利用的特点。以合成氨生产装置回收的低浓度氨水为吸收剂,实施锅炉烟气脱硫技术改造．取得良好的应用效果。     

1991～2007年昆明市工业污染物排放状况分析与研究

通过对1991～2007年间昆明市工业污染物排放状况的分析,对未来污染物排放进行了预测,提出了降低工业污染物排放的几点对策。     

葫芦岛有色金属集团废气治理对环境空气质量的影响

在研究分析葫芦岛有色金属集团近年来废气治理情况的基础上,根据葫芦岛市工业区环境空气质量监测数据,通过环境空气综合污染指数评价和Spearman秩相关系数评价,分析了废气治理对环境空气质量的影响.     

Degradation of acid fuchsine by a modified electro-Fenton system with magnetic stirring as oxygen supplying

The current modified electro-Fenton system was designed to develop a more convenient and e cient undivided system for practical wastewater treatment. The system adopted a cathode portion that employed magnetic stirring instead of common oxygen gas di usion or gas sparging to supply oxygen gas for the electrolyte solution. Key factors influencing the cathode fabrication and activity were investigated. The degradation of acid fuchsine with a self-made graphite-polytetrafluorethylene cathode was studied using a spectrophotometer. It was found that the cathode generated hydrogen peroxide with high current e ciency and the hydrogen peroxide yield of the cathode did not decay after 10 times reuse. With the Pt anode at a ferrous ion concentration of 0.5 mmol/L, a pH of 3, and using magnetic stirring, dye decolorization could be rapidly accomplished but the destruction of benzene rings and intermediates was fairly di cult. With a Fe anode, dye degradation was more complete.     

Metal chlorides loaded on activated carbon to capture elemental mercury

Activated carbon (AC) was considered to be an effective sorbent to control mercury in combustion systems. However, its capture capacity was low and it required a high carbon-to-mercury mass ratio. AC loaded with catalyst showed a high elemental mercury (Hg0) capture capacity due to large surface area of AC and high oxidization ability of catalyst. In this study, several metal chlorides and metal oxides were used to promote the sorption capacity of AC. As a result, metal chlorides were better than metal oxides loaded on AC to remove gaseous mercury. X-ray diffractometer (XRD), thermogravimetric analyzer (TGA) and specific surface area by Brunauer- Emmett-Teller method (BET) analysis showed the main mechanisms: first, AC had an enormous surface area for loading enough MClx; second, Cl and MxOy were generated during pyrogenation of MClx; finally, there were lots of active elements such as Cl and MxOy which could react with elemental mercury and convert it to mercury oxide and mercury chloride. The HgO and HgCl2 might be released from AC’s porous structure by thermo regeneration. A catalytic chemisorption mechanism predominates the sorption process of elemental mercury. As Co and Mn were valence variable metal elements, their catalytic effect on Hg0 oxidization may accelerate both oxidation and halogenation of Hg0. The sorbents loaded with metal chlorides possessed a synergistic function of catalytic effect of valence variable metal and chlorine oxidation.     

二次富集气相色谱法测定环境中的痕量磷化氢

本文研究了富集柱类型、富集温度和色谱操作条件等因素对二次富集气相色谱法测定环境中痕量PH3的影响,并将其应用于青岛大气和东海陆架沉积物中PH3的测定,取得了较为满意的结果.该方法具有操作简单、灵敏度高、分析速度快、干扰少等优点,其检测限为0.02 pg、精密度2.0%、线性范围为0.56 pg～5.6 ng.用此方法测定了冬季东海大陆架表层沉积物中PH3含量为(0.51～23.10)×10-9,其分布明显受到人类活动的影响,研究结果还表明东海沉积物中的PH3是海洋中磷的潜在来源之一;青岛崂山大气中PH3日变化趋势说明大气中PH3明显受光照的影响.     

大连市水泥产业结构调整与节能减排工作探索

综述了大连市政府根据水泥工业自身的发展形势和需要,作出了关闭全市所有非新型干法生产工艺的中小型水泥厂29家的重大抉择,完成了540万t落后水泥产能淘汰任务,取得了削减烟、粉尘排放量1123万t的效果：介绍了大连市水泥工业在节能减排方面的一些具体做法;展望了利用水泥工业“新陈代谢”的特点,节约能源资源、大力发展循环经济的发展趋势,并对节能减排工作进行了探索。     

活性炭再生及其在水处理中的应用

活性炭的再生方法有很多,如热再生法、生物再生法、化学溶液再生法、湿式氧化再生法、超临界萃取再生法、电化学再生法、超声波再生法、微波辐照再生法等。不同的方法有不同的特点适用于不同的工业废水处理。     

气相色谱法测定变压器油中的多氯联苯

利用固相萃取法提取变压器油中的多氯联苯,采用浓硫酸净化、气相色谱法进行分析,根据峰型和保留时间,以多氯联苯的商业用混合物的形式进行定性、定量,可以定量检出变压器油中2mg/kg以下的多氯联苯。     

基于微观模拟的企业排污强度差异及区域特征

同一工业行业内的企业存在排污强度个体差异,从数量有限的企业环境统计数据得出行业平均排污强度,并用其代表该行业在区域层面的经济-环境水平,会带来一定偏差.因此以嵌入环境消耗投入的生产函数为基础,建立了企业运营决策的微观模拟模型,从机制上描述企业排污强度的差异.以2005年德阳市机械制造行业为案例,对模型的相关参数进行了率定,使其较好地描述了2005年环境统计口径内各企业的COD排放强度.模型的计算结果表明,由环境统计口径内企业计算的区域平均COD排放强度(万元固定资产排放0.002 6 t,万元工业产值排放0.001 5 t)小于由区域内全部企业计算的区域平均COD排放强度(万元固定资产排放0.003 0 t,万元工业产值排放0.002 3 t),市域内6个县级行政区的排污强度也体现出了明显差异.以上的排污强度区域特征主要源自行业内部结构(企业的规模分布,技术分布),及其空间差异.