模拟盐水入侵及Fe(III)浓度增强对河口感潮淡水沼泽湿地土壤反硝化速率及理化特征的影响

以闽江河口塔礁洲感潮淡水野慈姑(Sagittaria trifolia Linn.)湿地为研究对象,于2016年2、4、7和9月每月均在连续2个小潮日内向研究样地施加人造海水和Fe(OH)_3溶液,研究短期的盐水入侵及Fe(III)浓度增强对河口感潮淡水湿地土壤反硝化速率及理化特征的影响.结果表明,短期的盐水入侵、Fe(III)浓度增强对河口感潮淡水沼泽湿地土壤反硝化速率的影响不显著,然而,盐水和Fe(III)共同施加会显著提高湿地土壤反硝化速率,与对照(CK)相比,盐水和Fe(III)共同施加可使土壤反硝化速率提高270.9%.盐水入侵、盐水和Fe(III)共同施加均可显著提高湿地土壤、间隙水的电导率及Cl~-、SO_4~(2-)的含量;Fe(III)浓度增强可显著降低土壤和间隙水pH值,同时显著提高土壤三价铁含量.     

基于空间适宜性评价和人口承载力的贵溪市中心城区城市开发边界的划定

城市开发边界的划定能够合理引导城市空间的有序发展,控制其无序蔓延。论文以典型的资源型城市贵溪市为研究区,从空间适宜性评价、人口承载力、城市规模以及城市总体规划和土地利用总体规划（简称“两规”）衔接等方面探索有效的城市开发边界划定方法。空间适宜性评价综合考虑自然、空间可达性和生态条件,运用聚类分析法确定区域内不宜作为开发建设的生态底线区域和适宜建设开发区域的高低等级,以此确定城市开发边界的发展方向。通过灰色预测GM(1,1)模型预测研究区2020年人口总量,并基于土地资源和水资源承载力验证当地所能容纳的最大人口总量,同时确定城市规模和划定城市开发边界。以空间适宜性评价、人口承载力、城市规模预测、两规衔接和空间形态控制等方法倒逼缩减建设用地,从而划定城市发展的刚性和弹性增长边界。     

海州湾表层沉积物磷的吸附容量及潜在释放风险

利用磷吸附指数（PSI）、磷吸附饱和度（DPS）和磷释放风险指数（ERI）研究了2016年10月和2017年5月海州湾表层沉积物的磷吸附容量及潜在释放风险.结果显示,2016年秋季PSI变化范围为99.58~199.39[mgP/（100g）]/[μmol/L],DPS变化范围为23.118%~34.289%;2017年夏季PSI变化范围是130.29~198.57[mgP/（100g）]/[μmol/L],DPS变化范围为25.545%~42.135%,两次调查中PSI和DPS均表现出相反的平面分布趋势.PSI和Al_ox、Fe_ox呈显著正相关,说明Fe_ox和Al_ox是影响海州湾表层沉积物吸附磷的主要因素,且Fe_ox占主导作用;DPS与Al_ox和Fe_ox分别表现出了显著负相关性和极显著负相关性,说明Al_ox和Fe_ox含量的增大会降低表层沉积物的磷吸附饱和度.2016年10月磷释放风险指数（ERI）的变化范围为11.59%~34.18%,2017年5月磷释放风险指数（ERI）的变化范围为12.86%~32.34%,从2次调查结果整体来看,海州湾表层沉积物的磷释放风险为中度风险.     

近10年中国三大经济区太阳总辐射特征及其与O3、PM2.5的关系

采用中国地面气象观测站网2007~2016年的辐射日值数据集和中国空气质量在线监测平台2014~2016年逐日观测数据,分析了京津冀、长三角和珠三角近10a太阳总辐射年际和季节变化,近3a臭氧日最大8h平均（O_{3_8h_max}）和细颗粒物（PM_2.5）的污染过程频次变化,通过不同因子及其不同强度等级的分型统计,探讨PM_2.5、O_{3_8h_max}与太阳总辐射的关系.结果表明：京津冀近10a太阳总辐射显著上升,京津冀春季和珠三角夏季太阳总辐射显著上升.三大经济区PM_2.5污染过程年频次均呈现逐年递减,且从北到南递减;O₃污染过程年频次时间上呈现先减后增,空间上京津冀多于长三角和珠三角.三大经济区O_{3_8h_max}与太阳总辐射相关系数均在0.71以上,有较强的正相关;而PM_2.5与太阳总辐射的相关性具有区域差异性.三大经济区不同季节不同太阳总辐射下O_{3_8h_max}与PM_2.5的相关关系差异显著,其中京津冀春夏秋三季O_{3_8h_max}与PM_2.5在强太阳总辐射下有较好的正相关,冬季则存在一定的负相关;长三角四季两者相关性均较弱;珠三角夏季两者正相关最为显著;不同PM_2.5浓度下O_{3_8h_max}与太阳总辐射的线性拟合效果较好,体现出较强的正相关关系,各经济区拟合曲线的倾向率均随PM_2.5升高而增大.PM_2.5>75μg/m³时拟合优度均达到最大.     

Nanoencapsulation of hexavalent chromium with nanoscale zero-valent iron: High resolution chemical mapping of the passivation layer

Solid phase reactions of Cr(Ⅵ) with Fe(0) were investigated with spherical-aberration-corrected scanning transmission electron microscopy(Cs-STEM) integrated with X-ray energy-dispersive spectroscopy(XEDS). Near-atomic resolution elemental mappings of Cr(Ⅵ)–Fe(0) reactions were acquired. Experimental results show that rate and extent of Cr(Ⅵ) encapsulation are strongly dependent on the initial concentration of Cr(Ⅵ) in solution. Low Cr loading in nZⅥ(1.0 wt%) promotes the electrochemical oxidation and continuous corrosion of n ZⅥ while high Cr loading(1.0 wt%) can quickly shut down the Cr uptake. With the progress of iron oxidation and dissolution, elements of Cr and O counter-diffuse into the nanoparticles and accumulate in the core region at low levels of Cr(Ⅵ)(e.g., 10 mg/L). Whereas the reacted n ZⅥ is quickly coated with a newly-formed layer of 2–4 nm in the presence of concentrated Cr(Ⅵ)(e.g., 100 mg/L). The passivation structure is stable over a wide range of pH unless pH is low enough to dissolve the passivation layer. X-ray photoelectron spectroscopy(XPS) depth profiling reconfirms that the composition of the newly-formed surface layer consists of Fe(Ⅲ)–Cr(Ⅲ)(oxy)hydroxides with Cr(Ⅵ) adsorbed on the outside surface. The insoluble and insulating Fe(Ⅲ)–Cr(Ⅲ)(oxy)hydroxide layer can completely cover the n ZⅥ surface above the critical Cr loading and shield the electron transfer. Thus, the fast passivation of nZⅥ in high Cr(Ⅵ) solution is detrimental to the performance of nZⅥ for Cr(Ⅵ) treatment and remediation.     

Suspended particulate mercury associated with tidal fluxes in a lagoon environment impacted by cinnabar mining activity (northern Adriatic Sea)

The Isonzo River has been demonstrated to be a continuing point source of mercury(Hg)in the Gulf of Trieste although the Idrija mine was last active in 1996. The present study aims to investigate the role of the suspended particulate matter(SPM) associated with tidal fluxes to disperse particulate Hg(PHg) into the Grado coastal lagoon system. PHg concentrations(avg. 3.11 ± 2.62 μg/g, d.w.), notwithstanding the ebb or flood tides, were significantly higher than the local sediment background(0.13 μg/g). The relative affinity of Hg for the particulate phase in surface waters was confirmed by higher average distribution coefficient(Kd) values(5.6–6.7). PHg contents showed the highest values in ebb tide conditions, thus suggesting their origin from the erosion of tidal flats and saltmarshes of the lagoon. When compared to river discharge, high PHg surface concentrations in flood tide are related to rainfall events occurring within the river basin. Results can be used to make an indicative assessment of the amount of Hg bound to SPM which is transported in and out of the lagoon basin following the action of tidal fluxes. A simple estimation provides a negative budget for the Grado lagoon sub-basin which loses between 0.14 and 1.16 kg of PHg during a tidal semi-cycle. This conclusion is in agreement with the evidence of morphological deterioration which has emerged from recent studies on the lagoon environment, and which testifies to a current sedimentary loss from the lagoon into the northern Adriatic Sea.     

Relationship between PM10 and PM2.5 levels in high-traffic area determined using path analysis and linear regression

The objective of this study was to determine the relationship between PM_(10) and PM_(2.5) levels as related to meteorological conditions and traffic flow using both a linear regression analysis and a path analysis. The Particulate matter(PM) samples were collected from Sukhumvit road, Bangkok, Thailand, at both open(104 samples) and covered(92 samples)areas along the road. Fifteen percent of all samples were separated before the statistical models were run and used for model validation. The results from the path analysis were more elaborate than those from the linear regression, thus indicating that meteorological conditions had a direct effect on the particulate levels and that the effects of traffic flow were more variable in open areas. The model also indicated that meteorological conditions had an indirect effect and that traffic flow had a direct effect on particulate levels in covered areas. The model validation results indicated that for open areas, the R~2 values were not very different between the path analysis and the linear regression model, but that the path analysis was more accurate than the linear regression model at very low PM concentrations. At high PM concentrations, the path analysis model also had a better fit than did the linear regression, so the predictions from the path analysis model were more accurate than those from the linear regression.     

可靠性强化试验技术在某型伺服作动器研制中的适用性探索

目的探索可靠性强化试验技术在典型机电液一体化产品伺服作动器研制过程中的适用性。方法以某型伺服作动器为研究对象,从故障激发的角度对可靠性强化试验技术的应用进行可行性分析,在响应调查和应力分析的基础上,结合产品的工作特点设计适用于该类伺服作动器的可靠性强化试验方案,包含低温步进应力试验、高温步进应力试验、快速温度循环试验10个循环、振动步进应力试验(包含气锤式三轴向六自由度超高斯随机振动方式及电磁振动台随机振动方式)及综合环境应力试验5个循环,并依此进行试验。结果在快速温度循环试验及综合环境应力试验过程中,均有效地激发出了产品的漏油故障,与相似产品外场暴露的漏油故障模式相吻合。结论可靠性强化试验技术可有效地应用于典型机电液一体化产品伺服作动器的研制过程,设计的可靠性强化试验方案可有效地激发外场出现频率较高的故障,可作为该类产品研制的试验手段之一。     

Development of monitoring technology for airborne particulate matter

Particulate matter suspended in the air has adverse effects onhuman health. Its level of concentration is an important parameter in evaluating the degree of hazard it poses to the atmosphere. Conventional methods used in measuring particulatematter are often filter-based, which indicates some disadvantagesbecause such a base requires labor and time. In this study, to achieve real-time measurements, a new electrical method was developed for measuring PM10 and PM2.5 concentrations. The basicprinciple is to electrically charge particles passing through thePM inlet using a corona charger and measure the currents createdby charged particles to obtain the number concentration of particulate matter. A new type inlet based on the particle cupimpactor configuration was designed and its performance was evaluated. A unipolar diffusion charger was developed and thecharger's efficiency was determined experimentally in terms ofPn, which represents the penetration through the charger,P, times the average charge number acquired by a particle,n, for different particle sizes. The correlation was constructed between the PM10 (or the PM2.5) mass concentrationsand the electrical currents due to particles, which were chargedby the diffusion charger.     

Desert Water Harvesting to Benefit Wildlife: A Simple, Cheap, And Durable Sub-Surface Water Harvester for Remote Locations

A sub-surface desert water harvester was constructed in the sagebrush steppe habitat of south-central Idaho, U.S.A. The desert water harvester utilizes a buried micro-catchment and three buried storage tanks to augment water for wildlife during the dry season. In this region, mean annual precipitation (MAP) ranges between about 150–250 mm (6″–10″), 70% of which falls during the cold season, November to May. Mid-summer through early autumn, June through October, is the dry portion of the year. During this period, the sub-surface water harvester provides supplemental water for wildlife for 30–90 days, depending upon the precipitation that year. The desert water harvester is constructed with commonly available, “over the counter” materials. The micro-catchment is made of a square-shaped, 20 mL. “PERMALON” polyethylene pond liner (approximately 22.9 m × 22.9 m = 523 m²) buried at a depth of about 60 cm. A PVC pipe connects the harvester with two storage tanks and a drinking trough. The total capacity of the water harvester is about 4777 L (1262 U.S. gallons) which includes three underground storage tanks, a trough and pipes. The drinking trough is refined with an access ramp for birds and small animals. The technology is simple, cheap, and durable and can be adapted to other uses, e.g. drip irrigation, short-term water for small livestock, poultry farming etc. The desert water harvester can be used to concentrate and collect water from precipitation and run-off in semi-arid and arid regions. Water harvested in such a relatively small area will not impact the ground water table but it should help to grow small areas of crops or vegetables to aid villagers in self-sufficiency.