德兴铜矿不同年份废石产酸规律研究

矿山选矿废石、尾矿在长期堆积过程中氧化产生的酸性废水会对环境造成严重危害.实验选取德兴铜矿1、5、10和20年废石进行产酸规律研究,静态评价结果显示,4种废石均有产酸潜势,且除1年废石以外均已产酸.为期9个月的动态评价结果表明,4个年份的废石pH均与电导率呈显著负相关,检出离子主要为氟化物、Cu2+、Zn2+、SO2-4、Fe3+.1年废石在整个实验进行中并未产酸,5、10年废石产酸稳定,20年废石产酸缓慢,可推断废石的产酸过程为:不产酸-高速产酸-稳定产酸-产酸速率下降.     

Degradation kinetics and mechanism of aniline by heat-assisted persulfate oxidation

Oxidation of aniline by persulfate in aqueous solutions was investigated and the reaction kinetic rates under different temperature, persulfate concentration and pH conditions were examined in batch experiments. The results showed that, the aniline degradation followed pseudo first-order reaction model. Aniline degradation rate increased with increasing temperature or persulfate concentration. In the pH range of 3 to 11, a low aniline degradation rate was obtained at strong acid system (pH 3), while a high degradation rate was achieved at strong alkalinity (pH 11). Maximum aniline degradation occurred at pH 7 when the solution was in a weak level of acid and alkalinity (pH 5, 7 and 9). Produced intermediates during the oxidation process were identified using liquid chromatography-mass spectrometry technology. And nitrobenzene, 4-4’-diaminodiphenyl and 1-hydroxy-1,2-diphenylhydrazine have been identified as the major intermediates of aniline oxidation by persulfate and the degradation mechanism of aniline was also tentatively proposed.     

Efficiency and degradation products elucidation of the photodegradation of mefenpyrdiethyl in water interface using TiO2 P-25 and Hombikat UV100

The photodegradation of mefenpyrdiethyl (MFD), an herbicide safener, was investigated in aqueous suspensions by using Degussa P-25 and Hombikat UV100 titanium oxide under simulated sunlight irradiation. The effects of initial concentration of the herbicide, pH, catalysts and hydrogen peroxide doses as well as their combinations were studied and optimized. Accordingly, the kinetic parameters were determined and the effectiveness of the processes was assessed by calculating the rate constants. A pseudo first-order kinetics was observed. Under experimental conditions, the degradation rate constants were strongly influenced using P-25 and no noticeable effect was observed for Hombikat UV100. DFT calculations with B3LYP/6-311+G(2d,p)//B3LYP/6-31+G(d,p) level of theory were performed to check whether significant conformational changes occur when the charge state of the MFD substrate changes and whether these changes could play a role in the dependency of photodegradation rate constant on the studied pH. High resolution mass spectrometry (FT-ICR/MS) was implemented to identify the main degradation products.     

微波催化燃烧气态甲苯特性及床层温度分布

采用浸渍法制备Cu-Mn-Ce/堇青石蜂窝催化剂,于微波催化燃烧装置中考察其对甲苯废气的催化活性与稳定性,并对固定床温度进行了测试分析.研究表明,微波加热下床层温度分布均匀,甲苯的最佳反应温度在230~270℃之间.当停留时间大于9.7s且床层温度高于270℃时,甲苯的降解率大于90%.铜锰铈单金属氧化物及其复合氧化物尖晶石是主要的活性组分,甲苯在其表面上进行准一级反应而被催化氧化.高温对催化剂结构有影响,但重复性试验证实了催化剂的高活性和良好的稳定性.本文为微波催化燃烧技术治理VOCs废气的中试研究及下一步的实际应用提供了理论支持.     

电絮凝技术处理洗车废水试验

采用电絮凝技术处理洗车废水,以保证处理后出水能够循环利用。考察电流密度、初始pH值、NaCl浓度及电解时间等操作因素对COD与浊度去除效果的影响。结果表明,在最佳处理条件下,出水达到生活杂用水水质标准;另外,去除COD过程符合一级动力学模型,去除单位浓度COD产生4.02×10-3kg湿污泥、3.10×10-4kg干污泥。     

Electrocoagulation process for the treatment of metal-plating wastewater: Kinetic modeling and energy consumption

The wastewater from industrial area was treated by EC via Fe and Al electrodes. Cu, Ni, Cr and Zn were highly removed at the first minutes, simultaneously. Pseudo-2nd-order was found to be more suitable for kinetics. Adsorption capacities based on kinetic modeling were observed as Cr>Cu>Ni>Zn. The chemical cost in the case of pH adjustment after EC was less as 3.83 $/m³. It is known that wastewater produced by the metal-plating industry contains several heavy metals, which are acidic in nature and therefore toxic for the environment and for living creatures. In particular, heavy metals enter the food chain and accumulate in vital organs and cause serious illness. The precipitation of these metals is mostly achieved by pH adjustment, but as an alternative to this method, the electrocoagulation process has investigated in this study using iron and aluminum electrodes. The effects of the pH adjustment on removal before and after the electrocoagulation process were investigated, and cost analyses were also compared. It was observed that a high proportion of removal was obtained during the first minutes of the electrocoagulation process; thus, the current density did not have a great effect. In addition, the pH adjustment after the electrocoagulation process using iron electrodes, which are 10% more effective than aluminum electrodes, was found to be much more efficient than before the electrocoagulation process. In the process where kinetic modeling was applied, it was observed that the heavy metal removal mechanism was not solely due to the collapse of heavy metals at high pH values, and with this modeling, it was seen that this mechanism involved adsorption by iron and aluminum hydroxides formed during the electrocoagulation process. When comparing the ability of heavy metals to be adsorbed, the sequence was observed to be Cr>Cu>Ni>Zn, respectively.     

鲤鱼对三种硝基芳族化合物的摄取、释放和生物富集

用第二松花江水和鱼体中多次检出的三种硝基芳族化合物来分别测定鲤鱼体中的生物富集系数（ＢＣＦ），摄取和释放动力学参数，以及在肌肉、肠、肝和鳃等组织中的分布。试验在半静态条件下进行。硝基芳族化合物在鲤鱼体内的释放可用双区一级动力学模型很好地描述。鲤鱼对２，４－二硝基甲苯和对硝基氯苯的富集过程中发现有未知的代谢产物生成。     

固定化光合细菌处理催化裂化与加氢废水

在２８Ｌ柱式反应器内,沼泽红假单胞菌经软性纤维固定后,连续处理炼油厂催化裂化与加氢废水（此前已经过汽提和厌氧消化预处理）。当反应器进水ＣＯＤ为４７０ｍｇ／Ｌ、废水停留时间为７０ｈ时,出水分离出菌体后,ＣＯＤ小于１００ｍｇ／Ｌ。建立了该处理系统的动力学模型,其参数Ｋｓ＝２９．８ｍｇ／Ｌ,μｍ＝０．０１ｈ－１。     

水合氧化铁去除Cu~(2+)的实验研究

研究了实时生成的水合氧化铁(HFO)对Cu2+的去除。研究结果表明:生成的水合氧化铁是棕黄色无定形铁的氧化物,盐滴定方法测得其零电荷点PZC为8.28±0.02;它对Cu2+吸附的动力学特征受控于HFO的生成动力学,其吸附等温线可用Henry公式和类似Langmuir公式的叠加来拟合;随着吸附剂量的增加,它对Cu2的吸附率和吸附量的影响分别呈现出指数形式(Y=aXb)的增加和减少。Cu2+从溶液中去除的可能机理包括表面络合反应、共沉淀、表面沉淀、Cu2+的水解作用、Cu2+的水解产物与水合氧化铁的絮凝作用等。     

上海新港河道耗氧特性研究及其综合整治措施

通过实验室试验测定,得出了上海市新港河道水体和底泥的耗氧特性曲线,分析了水体和底泥耗氧的阶段历时、阶段耗氧特性及动力学过程.在缺乏河道水质模型的情况下,利用耗氧特性曲线可以估算各个阶段的耗氧量和河道的总耗氧量,为河道充氧设备的选择提供一定的理论指导.通过计算,上海新港河道的总耗氧量约为75.7kg/d.上海宏成实业发展有限公司采用充氧曝气、投加微生物、种植水生植物等措施对河道进行了治理,实践表明,这些措施可以使新港河道的水质有明显的改善.