A numerical study of summer ozone concentration over the Kanto area of Japan using the MM5/CMAQ model

We assessed the ability of the MM5/CMAQ model to predict ozone (O3) air quality over the Kanto area and to investigate the factors that a ect simulation of O3. We find that the coupled MM5/CMAQ model is a useful tool for the analysis of urban environmental problems. The simulation results were compared with observational data and were found to accurately replicate most of the important observed characteristics. The initial and boundary conditions were found to have a significant e ect on simulated O3 concentrations. The results show that on hot and dry days with high O3 concentration, the CMAQ model provides a poor simulation of O3 maxima when using initial and boundary conditions derived from the CMAQ default data. The simulation of peak O3 concentrations is improved with the JCAP initial and boundary conditions. On mild days, the default CMAQ initial and boundary conditions provide a more realistic simulation. Meteorological conditions also have a strong impact on the simulated distribution and accumulation of O3 concentrations in this area. Low O3 concentrations are simulated during mild weather conditions, and high concentrations are predicted during hot and dry weather. By investigating the e ects of di erent meteorological conditions on each model process, we find that advection and di usion di er the most between the two meteorological regimes. Thus, di erences in the winds that govern the transport of O3 and its precursors are likely the most important meteorological drivers of ozone concentration over the central Kanto area.     

Scale-up modeling of the twin roll casting process for AZ31 magnesium alloy

In the present study, a 2-D finite-element method (FEM) thermal-fluid-stress model has been developed and validated for the twin roll casting (TRC) of AZ31 magnesium alloy. The model was then used to quantify how the thermo-mechanical history experienced by the strip during TRC would change as the equipment was scaled up from a laboratory size (roll diameter = 355 mm) to a pilot scale (roll diameter = 600 mm) and to an industrial scale (roll diameter = 1150 mm) machine. The model predictions showed that the thermal history and solidification cooling rate experienced by the strip are not affected significantly by caster scale-up. However, the mechanical history experienced by the strip did change remarkably depending on the roll diameters. Casting with bigger rolls led to the development of higher stress levels at the strip surface. The roll separating force/mm width of strip was also predicted to increase significantly when the TRC was scaled to larger sizes. Using the model predicted results, the effect of both casting speed and roll diameter was integrated into an empirical equation to predict the exit temperature and the roll separating force for AZ31. Using this approach, a TRC process map was generated for AZ31 which included roll diameter and casting speed.     

基于CALPUFF模型的漳州市大气环境容量研究

研究表明：CALPUFF模式是运用于广域的大气扩散模型,在区域范围较大的复杂地形条件下的应用具有突出的优势.利用CALPUFF大气扩散模型模拟漳州市2009年气象场和污染物浓度场,采用监测值对模拟结果进行验证表明模型的适用性;基于现状污染源,建立大气污染物传递系数矩阵,结合线性优化法测算了不同环境空气质量标准下漳州市大气环境容量.     

Kinetic extractions to assess mobilization of Zn, Pb, Cu, and Cd in a metal-contaminated soil: EDTA vs. citrate

Kinetic EDTA and citrate extractions were used to mimic metal mobilization in a soil contaminated by metallurgical fallout. Modeling of metal removal rates vs. time distinguished two metal pools: readily labile (QM1) and less labile (QM2). In citrate extractions, total extractability (QM1+QM2) of Zn and Cd was proportionally higher than for Pb and Cu. Proportions of Pb and Cu extracted with EDTA were three times higher than when using citrate. We observed similar QM1/QM2 ratios for Zn and Cu regardless of the extractant, suggesting comparable binding energies to soil constituents. However, for Pb and Cd, more heterogeneous binding energies were hypothesized to explain different kinetic extraction behaviors. Proportions of citrate-labile metals were found consistent with their short-term, in-situ mobility assessed in the studied soil, i.e., metal amount released in the soil solution or extracted by cultivated plants. Kinetic EDTA extractions were hypothesized to be more predictive for long-term metal migration with depth.     

Variation of MCPA, metribuzine, methyltriazine-amine and glyphosate degradation, sorption, mineralization and leaching in different soil horizons

Pesticide mineralization and sorption were determined in 75 soil samples from 15 individually drilled holes through the vadose zone along a 28 km long transect of the Danish outwash plain. Mineralization of the phenoxyacetic acid herbicide MCPA was high both in topsoils and in most subsoils, while metribuzine and methyltriazine-amine was always low. Organic matter and soil pH was shown to be responsible for sorption of MCPA and metribuzine in the topsoils. The sorption of methyltriazine-amine in topsoil was positively correlated with clay and negatively correlated with the pH of the soil. Sorption of glyphosate was tested also high in the subsoils. One-dimensional MACRO modeling of the concentration of MCPA, metribuzine and methyltriazine-amine at 2 m depth calculated that the average concentration of MCPA and methyltriazine-amine in the groundwater was below the administrative limit of 0.1 μg/l in all tested profiles while metribuzine always exceeded the 0.1 μg/l threshold value.     

防烟空气幕防烟有效性模拟实验研究

利用火灾模拟软件FDS,以四川消防研究所高层实验塔二层为原型建立模型,对防烟空气幕的防烟有效性进行研究。本次实验在前室内设置测点,测定前室内的温度及CO浓度。实验结果表明:在未设置防烟空气幕时,前室内1.25m高度以上的测点温度稳定后均在35～45℃之间,CO浓度最大达到180ppm;在设置风幕后,前室内1.25m高度以上的测点温度稳定后在20～30℃之间,CO浓度最大为75.7ppm。因此,防烟空气幕能有效的减少烟气的进入量,降低进入前室的烟气的温度及有害气体浓度,为人员的安全疏散赢得时间。     

基于数字流域的水文过程模拟研究

考虑流域下垫面空间变异性,基于数字高程模型构建了数字流域,并在此基础上对描述流域水文物理过程的数学方法进行了探讨,文章认为,数字水文模型是一种有物理基础的包含大容量信息的现代模拟灌河实例研究表明,数字水文模型可以十分方便地输出水文要素和状态变量的空间分布与时间序列,这对充分利用现有观测信息进行水文信息的深层挖掘创新了条件。     

谷氨酰胺转胺酶(MTG)分批发酵中温度对S.mobaraense生长及产酶影响的模型化

研究了2.5L小罐培养过程中控制温度为25℃～35℃时对细胞生长和MTG合成的影响.结果表明当控制相对较低的温度时,细胞生长的延滞期较长,当控制温度较高时,细胞生长的延滞期较短,达到最大DCW和最高MTG酶活的时间均较短;通过研究各种不同模型对细胞生长的影响得到最适合描述S.mobaraense生长与温度之间的关系方程为Schoolfield方程;通过对最大DCW和最大MTG酶活进行数学模拟,发现方程X(U)=-a     

Prognosis of the spatiotemporal dynamics of ecosystems by means of universal kriging

The use of quantitative data for constructing prognostic maps of the dynamics of ecosystem degradation and restoration by nonlinear simulation methods is a topical field of landscape ecology. This method of dynamic cartography is based on fiberwise comparison of data on the state of Chernye Zemli (the Kalmyk Republic, Russia) in different years and the detailed analysis of the period on which the prognosis was based. For this purpose, materials of repeated aerial and satellite photography obtained during a long period (1954–1993) were used. Comparison of maps characterizing the dynamics of Chernye Zemli between 1958 and 1993 allows prognostic electronic maps for the next 10–15 years (with a five-year interval) to be drawn and land prognosis for the next 20–30 years (1998–2023) to be obtained. Deceased     

北斗导航终端设备可靠性加速试验与快速评价技术研究

针对北斗导航终端设备开展传统可靠性试验时间长、成本高,难以实现在短期内完成高可靠性指标考核的现状,借鉴加速试验建模技术和相关标准的加速模型参数,进行北斗导航整机可靠性加速建模,设计加速试验剖面和方案,预先评估出北斗导航终端设备的加速因子,通过一组样品即可完成北斗导航的加速试验,实现对北斗导航终端设备高可靠性指标的快速评估。