生物强化系统微生物分子诊断技术的应用及新发展

现代分子生物技术的飞速发展及其在环境研究领域的应用，为生物强化技术的研究和发展提供了新方法和新思路。本文从生物强化系统特异微生物检测及定量化技术、生物强化系统微生物群落结构组成及动态演替规律研究、生物强化作用机制的分子生物学解析、生物强化菌的基因工程构建、生物强化系统微生物的安全释放及控制技术几方面，对生物强化系统微生物分子诊断技术的应用和发展作了较为全面的综述。     

利用分子信标和EXO III放大荧光信号快速检测Ag+

设计新型的DNA探针,其主要功能区域包含适配体区域和分子信标互补区域;当无靶标存在时,羧基荧光素（FAM）的荧光被黑洞猝灭基团（BHQ）猝灭,加入靶标后,Ag⁺与适配体区域特异性结合,使得分子信标与其互补区域发生结合,加入EXO Ⅲ后,分子信标被酶解,从而释放Ag⁺/DNA探针复合物用于下一轮反应,同时产生大量的FAM,因此,可以通过荧光的增强来定量检测靶标的含量.评价了该方法的灵敏度和选择性,探究它在实际样品中的表现能力.结果表明,适配体区域与分子信标间隔2个碱基的DNA探针与分子信标结合效果最好,检测的信噪比最大.该方法对Ag⁺的检测最低下限（LOD）为0.1nmol/L,在0.5~200nmol/L范围内,荧光值与靶标浓度成线性关系（R²=0.994）.对实际样品的检测在20~200nmol/L范围内呈线性关系（R²=0.998）,且能很好的从混合样品中区分10nmol/L Ag⁺.该研究建立的快速检测Ag⁺方法具有良好的线性定量能力和操作性能,且灵敏度高、特异性强,可满足现实的需求.     

低浓度甲醛促进K562细胞增殖的分子机制探究

低浓度甲醛(Formaldehyde,FA)可以促进细胞增殖.本实验选用K562细胞为实验对象,用不同浓度的甲醛溶液处理细胞,探究其中可能存在的分子机制.测定细胞活力及胞内氧化损伤程度后,发现当甲醛浓度为75μmol·L~(-1)时,细胞增殖率上升(p0.05或p0.01),Warburg效应中的丙酮酸激酶M2型同工酶(PKM2)、葡萄糖转运蛋白1(GLUT1)、乳酸脱氢酶A(LDHA)、葡萄糖和乳酸含量上升(p0.05);此外,细胞周期调控因子Cyclin D-cdk4与转录因子E2F1含量也上升(p0.05).同时,细胞内氧化损伤加强,其中活性氧簇(reactive oxygen species,ROS)含量上升(p0.01),还原型谷胱甘肽(glutathione,GSH)下降(p0.05).然而,在加入抗氧化剂VE后,氧化损伤程度减弱,细胞增殖率降低,PKM2、GLUT1、LDHA、葡萄糖、乳酸,Cyclin D-cdk4、E2F1含量均下降.结果表明低浓度甲醛可能通过氧化应激诱导Warburg效应和影响细胞周期调控因子两条途径促进细胞的增殖.     

Purification and molecular weight distribution of a key exopolysaccharide component of Bacillus megaterium TF10

Extracellular polymeric substances (EPS) are organic metabolic compounds excreted by microorganisms. They largely impact microbial aggregate structures and functions. Extracellular polysaccharides (EP) in EPS are responsible for the formation of microbial aggregates. In this work, we successfully separated and characterized EP from EPS of the bacterium Bacillus megaterium TF10. Extraction of EP from EPS was optimized using Sevag''s reagent. Chemical characteristics, functional groups, and molecular weight (MW) distribu-tion of EP were compared with the harvested EPS and soluble microbial products (SMP). We found that the polymers of lower MW and free proteins were successfully removed by Sevag''s reagent. The higher MW components of EPS were predominantly polysaccharides, while the polymers of lower MW tended to secrete to the supernatant and were described as SMP. A part of the proteins in the EP was polysaccharide-bonded. Our results can be further used in elucidating the complex flocculation mechanisms in which EP play a major role.     

Characteristics of molecular weight distribution of dissolved organic matter in bromide-containing water and disinfection by-product formation properties during treatment processes

The characteristics of dissolved organic matter (DOM) and bromide ion concentration have a significant influence on the formation of disinfection by-products (DBPs). In order to identify the main DBP precursors, DOM was divided into five fractions based on molecular weight (MW), trihalomethane formation potential and haloacetic acid formation potential were determined for fractions, and the change in contents of different fractions and total DBPs during treatment processes (pre-chlorination, coagulation, sand filtration, disinfection) were studied. Moreover, the relationship between bromide concentration and DBP generation characteristics in processes was also analyzed. The results showed that the main DBP precursors were the fraction with MW < 1 kDa and fraction with MW 3−10 kDa, and the DBP''s generation ability of lower molecular weight DOM (< 10 kDa) was higher than that of higher molecular weight DOM. During different processes, pre-chlorination and disinfection had limited effect on removing organics but could alter the MW distribution, and coagulation and filtration could effectively remove organics with higher MW. For DBPs, trihalomethanes (THMs) were mainly generated in pre-chlorination and disinfection, while haloacetic acids (HAAs) were mostly generated during pre-chlorination; coagulation and sand filtration had little effect on THMs but resulted in a slight removal of HAAs. In addition, the results of ANOVA tests suggested that molecular sizes and treatment processes have significant influence on DBP formation. With increasing bromide concentration, the brominated DBPs significantly increased, but the bromine incorporation factor in the processes was basically consistent at each concentration.     

煤质粉末活性炭自燃和热稳定性分析

针对煤质粉末活性炭最显著的热危险特性——自燃危险性进行试验。采用粉尘层最低着火温度测定系统对煤质粉末活性炭进行自燃试验,测定煤质粉末活性炭的最低着火温度;采用SDT Q600热重分析仪测定煤质粉末活性炭在氮气和空气气氛中以20℃/min的速率升温至700℃时的热解和燃烧特性,通过TG/DTG曲线计算其着火温度,并进行热稳定性评价。粉尘层自燃试验结果表明,煤质粉末活性炭最低着火温度为400℃,具有自燃危险性,易形成阴燃;氮气气氛中热解试验表明,热解过程经历了室温~120.0℃和280.0~700.0℃两次轻缓失重阶段,646.44℃时挥发分热失重速率最大,对应热失重速率峰值为0.082 6%/℃,自燃危险性较低;空气气氛中燃烧试验表明,燃烧过程经历了室温~95.5℃和300.0~600.0℃两次剧烈失重阶段,分别为吸附水分受热蒸发和氧化生成的有机官能团分解脱附导致,565.35℃时挥发分热失重速率最大,对应热失重速率峰值为13.20%/min,粉末较强的氧气吸附效应和较低的导热系数导致其自燃倾向较高,火灾危险性较大。     

区域污染源排污总量分配方案初探

文章以实现区域可持续发展为目标,对区域污染物排污总量的分配进行了初步探索,通过分析对其有影响的各种因素,最终为特定区域发展规划的制定,可持续发展的实现,提供了一种较好的污染物排污总量分配方案。     

池塘悬浮物COD值与灼烧减重燃烧热值的定量关系

为了快速监测水体悬浮有机物的数量,文章采用密封法测定COD,研究了池塘水体悬浮物及固体干物质样品的COD值与燃烧热值及灼烧减重之间的定量关系。结果表明:池塘水体悬浮物及固体干物质样品的COD值与燃烧热值及灼烧减重之间存在显著的相关关系。而且池塘水体悬浮物的COD值与燃烧热值之间的线性回归关系极显著,回归方程为,燃烧热值(J/L)=12.34COD(mg/L)+329.9。给定燃烧热值与有机碳的量以及与有机物量之间的换算系数,就可以推算出池塘悬浮有机物的数量。研究提出了一种池塘水体悬浮有机物的间接定量方法。     

未确知测度模型在污水处理厂评价中的应用

污水处理厂的运行管理效果涉及到污水处理厂的处理水量、水质和能耗等诸多项指标,是多指标综合评价问题。文中将未确知测度综合评价模型应用于污水处理厂运行效果评价中。鉴于在多指标识别问题中,专家难以凭借个人经验确定客观型指标权重,文中采用了信息论中熵的概念来确定评价指标权重,使评价结果更加客观合理。未确知测度模型对评价空间实现了有序分割,提高了分辨率,评价效果可靠,是一种实用模型。     

熵权多目标决策模型在水环境质量综合评价中的应用

介绍了熵和熵权的概念与性质,在此基础上结合多目标决策模型建立熵权多目标决策评价方法,并对水环境质量进行综合评价,评价结果与物元分析模型、属性识别理论方法、模糊隶属函数法进行对比,结果表明,利用熵权多目标决策评价法进行水环境质量综合评价是可行的。