笼养肉鸡舍冬季挥发性有机物排放特征

畜禽养殖过程产生的挥发性有机物（VOCs）会影响周围环境质量和人畜健康.针对肉鸡养殖过程挥发性有机物排放特征研究较少,主要致臭物质及致癌、非致癌健康风险影响评价不明确、臭氧生成潜力分析不足等问题,开展了对肉鸡舍内挥发性有机物的现场监测试验,在肉鸡舍采用苏玛罐采样结合气相色谱-质谱法分析了冬季肉鸡生长前期、生长中期和生长后期VOCs的排放特征.结果表明,肉鸡生长过程中共检测出77种VOCs,包括16种卤代烃、21种烷烃、5种烯烃、12种芳香烃、15种含氧VOCs （OVOCs）和8种含硫化合物.整个生长阶段舍内卤代烃、烷烃、烯烃、芳香烃和OVOCs浓度变化不大,但是随着肉鸡的生长,含硫氨基酸摄入量和粪便排污系数增加,舍内排放的VOCs逐渐转为硫化物为主.含硫VOCs浓度在生长前期和中期呈现不断升高趋势,但是生长后期舍内通风量增加导致含硫VOCs浓度降低.肉鸡生长过程中监测到的VOCs中主要致臭物质为萘、乙酸乙酯、乙醛、二硫化碳、二甲基二硫、甲硫醇、甲硫醚和噻吩,其中甲硫醇的恶臭指数最高,范围为2172.4~19090.9;生长前期和生长中期存在可能致癌健康风险,终生癌症风险（LCR）值分别为7.7×10^-6和4.5×10^-6.舍内VOCs臭氧生成潜势（OFP）平均值为（1458.9±787.4）μg ·m^-3.结果明确了肉鸡生长过程中VOCs的排放特征,摸清了致臭物质、健康风险和臭氧生成潜势,可为肉鸡养殖过程中污染气体减排策略的制定提供科学依据.     

上海城区PM2.5中有机组分及硝基芳香化合物分布特征

硝基芳香化合物（NACs）是细颗粒物中含氮化合物的重要组成部分,研究其在大气中的污染特征和季节变化,有助于表征大气细颗粒物中含氮有机化合物特性,并为城市氮氧化物削减提供科学支撑.采集并分析了上海城区2018年3月～2019年2月大气PM_2.5样品,采用超高效液相色谱-轨道阱质谱（UPLC-Orbitrap MS）在PM_2.5样品中定性检测到了2 439～3 695个有机物,内标法定量了9种NACs,春季ρ（NACs）范围为3.12～16.8 ng·m^-3,平均值为9.31 ng·m^-3;夏季ρ（NACs）范围为1.05～9.70 ng·m^-3,平均值4.16 ng·m^-3;秋季ρ（NACs）范围为2.87～36.27 ng·m^-3,平均值9.84 ng·m^-3,冬季ρ（NACs）范围为4.83～56.23 ng·m^-3,平均值为22.37 ng·m^-3. 9种硝基芳香化...     

石油石化有机液体装载油气回收技术评估

对炼化企业和储油库企业有机液体装载油气回收技术路线开展了调查分析,从设计气量和浓度、现场监测、技术路线对比等方面对装载油气回收技术进行了评估,指出存在的问题并对技术路线分三类提出了选择建议;通过减排效益分析,提出油气回收可实现全成本微盈利,对企业具有环保和经济双赢效益。     

热脱附法快速分析大气细颗粒物中非极性有机物

本研究改进了传统有机样品前处理步骤,将大气细颗粒物样品直接装填于TD管并与气相色谱联用的自动化热脱附装置,建立的新型热脱附(thermo desorption,TD)与气相色谱/质谱(GC/MS)联用方法,对72种非极性有机物(non-polar organic compounds,NPOCs),包括34种多环芳烃(polylicycle aromatic hydrocarbon,PAHs)、1种苯并噻吩、27种(C_(10)~C_(34))烷烃(alkanes)、5种霍烷(hopanes)和5种甾烷(steranes)化合物进行定量分析.优化了承载样品装填方式、热脱附条件和进样模式等参数.结果表明,热脱附-气相色谱/质谱方法对多环芳烃、正构烷烃、霍烷和甾烷的检出限分别为0.01~1.0、0.1~8.0和0.50~2.0 ng·m~(-3),标定曲线线性相关系数在0.9以上.热脱附效率分别为:多环芳烃95%~100%、正构烷烃81%~100%、霍烷和甾烷83.1%~100%.与传统溶剂超声萃取的方法差异性比较结果表明,两种方法分析结果的偏差基本小于30%,在可接受范围内.对临安和上海PM_(2.5)中的痕量NPOCs的定量分析表明,采样期间两地大气PM_(2.5)中NPOCs以烷烃为主,其次为PAHs.特征比值法分析结果表明,大气细颗粒物污染主要来自化石燃料燃烧和煤炭燃烧.     

催化铁内电解法预处理硝基苯废水的机理研究

研究了硝基苯溶液在石墨和铜电极上的电还原特性,并评价了催化铁内电解还原产物的紫外光谱和电还原特性。结果表明,硝基苯能在铜电极上直接发生得电子还原反应,此即催化铁内电解法反应机理的显著特点。本方法对硝基苯废水进行预处理,是各种化学作用和电化学作用的综合效应,因此,具有较高的处理效率。     

萃取—汽提法处理硝基苯废水的研究

先用苯萃取使废水中硝莽本的浓度达３ｐｐｍ以下，再用水蒸气汽提使废水中的苯浓度达１０ｐｐｍ以下，并使硝基苯浓度进一步降低，处理后的废水全面达到国家二级排放标准。苯和萃取出的硝基苯都可回收利用．。     

Enhanced photodegradation of phenolic compounds by adding TiO2 to soil in a rotary reactor

Photodegradation ofpentachlorophenol （PCP） and p-nitrophenol （PNP） in soil was carried out in a designed rotary reactor, which can provide the soil particles with continually uniform irradiation, and on a series of thin soil layers. TiO2, as a kind of environmental friendly photocatalyst, was introduced to the soil to enhance the processes. Compared with that on the soil layers, photodegradation of PCP at initial concentration of 60 mg/kg was improved dramatically in the rotary reactor no matter whether TiO2 was added, with an increase of 3.0 times in the apparent first-order rate constants. The addition of 1 wt% TiO2 furthered the improvement by 1.4 times. Without addition of TiO2, PNP （initial concentration of 60 mg/kg） photodegradation rate in the rotary reactor was similar to that on the soil layers. When 1 wt% additional TiO2 was added, PNP photodegradation was enhanced obviously, and the enhancement in the rotary reactor was 2 times of that on the soil layers, which may be attributed to the higher frequency of the contact between PNP on soil particles and the photocatalyst. The effect of soil pH and initial concentrations of the target compounds on the photodegradation in the rotary reactor was investigated. The order of the degradation rate at different soil pH was relative to the aggregation of soil particles during mixing in the rotary reactor. Photodegradation of PCP and PNP at different initial concentrations showed that addition of TiO2 to enhance the photodegradation was more suitable for contaminated soil with higher concentration of PCP, while was effective for contaminated soil at each PNP concentration tested in our study.     

Analysis of chemical contamination within a canal in a Mexican border colonia

This study examines urban pollution within Derechos Humanos, a colonia popular in Matamoros, Tamaulipas, Mexico. General water quality indicators (coliform bacteria, total dissolved solids, ecologically relevant cations and anions), heavy metals (copper, lead, nickel, zinc, iron and cadmium), and volatile organic compounds (benzene, toluene, ethylbenzene, styrene, and dichlorobenzene and xylene isomers) were quantified within a wastewater canal running adjacent to the community. Water samples were collected at multiple sites along the banks of the canal and evidence of anthropogenic emissions existed at each sampling location. Sample site 2, approximately 10 m upstream of the colonia, contained both the widest range of hazardous pollutants and the greatest number exceeding US Environmental Protection Agency surface water standards. At each sampling location, high concentrations of total coliform (> 10(4) colonies/100 mL sample), lead (ranging from 0.05 to 0.40 mg/L), nickel (levels from 0.21 to 1.45 mg/L), and benzene (up to 9.80 mg/L) were noted.     

Modeling China's semiconductor industry fluorinated compound emissions and drafting a roadmap for climate protection

Fluorinated compounds (FC) are high-global warming potential (GWP) greenhouse gases used and emitted during the manufacture of silicon semiconductor devices. Following the U.S. EPA's PFC Emissions Vintage Model (PEVM), uncontrolled FC emissions are modeled as proportional to total manufactured layer area (TMLA) of silicon. FC emissions of World Semiconductor Council (WSC) charter member countries (Europe, Japan, Korea, Taiwan and the United States), which voluntarily committed in 1999 to lower FC emissions by 2010 to 10% of baseline year emissions, are modeled for the period 1995–2020. For this same period, emissions from Chinese manufacturers under alternative emission reduction scenarios are modeled. If Chinese manufacturers were to adopt a baseline year of 2005 and a reduction target of 10% below baseline year emissions to be achieved by 2020, emissions would be 3.4 MMTCO₂eq, comparable to the similarly projected controlled emissions of an average WSC charter member country (=16.3/5 MMTCO₂eq) in 2020. The relative stringency of the alternative reduction scenarios considered for China vary between 50 and 95% reduction compared to business as usual (BAU). This is comparable to the stringency of the WSC charter members’ goals for which FC emission reduction technologies are currently available.     

Air pollutant emissions from the asphalt industry in Beijing, China

Improving our understanding of air pollutant emissions from the asphalt industry is critical for the development and implementation of pollution control policies. In this study, the spatial distribution of potential maximum emissions of volatile organic compounds (VOCs) in the complete life cycle of asphalt mixtures, as well as the particulate matter (PM), asphalt fume, nonmethane hydrocarbons (NMHCs), VOCs, and benzoapyrene (BaP) emissions from typical processes (e.g., asphalt and concrete mixing stations, asphalt heating boilers, and asphalt storage tanks) in asphalt mixing plants, were determined in Beijing in 2017. The results indicated that the potential maximum emissions of VOCs in the complete life cycle of asphalt mixtures were 18,001 ton, with a large contribution from the districts of Daxing, Changping, and Tongzhou. The total emissions of PM, asphalt fume, NMHC, VOCs, and BaP from asphalt mixing plants were 3.1, 12.6, 3.1, 23.5, and 1.9 × 10^?3 ton, respectively. The emissions of PM from asphalt and concrete mixing stations contributed the most to the total emissions. The asphalt storage tank was the dominant emission source of VOCs, accounting for 96.1% of the total VOCs emissions in asphalt mixing plants, followed by asphalt heating boilers. The districts of Daxing, Changping, and Shunyi were the dominant regions for the emissions of PM, asphalt fume, NMHC, and BaP, while the districts of Shunyi, Tongzhou, and Changping contributed the most emissions of VOCs.