新建水库初期磷氮变化的动态模拟研究

本文首先建立磷氮时空分布模型并确定模型参数的率定方法。文章模拟了新建清平水库建库初期磷氮变化情况,得出由不稳定到稳定的过程。水库磷氮时空变化的模拟结果表明,空间分布是从库尾到大坝浓度逐渐递砬,时间分布是一年中Ｐ,Ｎ浓度七月份最高,年初年末最低,其分布央线类似高斯分布。     

Sensitivity of Ozone Production to the Nmhc Composition, Aerosol Back-Scattering and High Chimney Emission

In this paper, three sensitivity studies are designed to analyze the effect of the NMHC (Non-Methane HydroCarbon) composition, the aerosol back-scattering and the high chimney NO_x emission to the photochemical prodution of ozone by using a one-dimensional photochemistry-diffusion model under a favourable meteorological condition. Measurements of the NMHC composition in Taipei indicated that the percentage of iso-butene, cis-2-butene, trans-2-butene and benzene in a unit volume was much higher than of those observed in other major cities. the high ratio of benzene was directly linked to its high percentage in gasoline. As to the unusually high amount of iso-butene, cis-2-butene and trans-2-butene, more researches are needed to identify their source. Concerns are raised as to how productive is NMHC composition is to the photochemical production of the surface ozone. A rough estimate shows that the total reactivity of the Taipei NMHC composition is about 1.21 × 10^-9 cm³ s^-1 which is 1.6 times that of the Los Angeles (LA) NMHC composition, while the simulated noon peak will be different by 28 ppbv, i.e. 18% more than that simulated with a LA composition.

Meanwhile, high aerosol loading is a serious problem in Taipei. the attenuation of the UV radiation by aerosols cannot be ignored. A numerical simulation shows that the noon ozone level will decrease from 178 to 141ppbv, i. e. about 21% reduction, with deterioration of the visual range from 85 to 5 km.

In the southern Taiwan, industry parks are mixed with the populated Kaohsiung city, hence the large emission of NO_x from high chimneys cannot be ignored. in this study, NO_x is assumed to be emitted in the layer between 235-460 m high with an emission rate of 0.05 or 0.145 ppbv/sec. the results show that the NO_x emitted from the elevated stack lead to a considerable reduction of surface ozone. Such conclusion is obtained due to the fact that a one-dimensional model is used in this paper. Whereas, if a three-dimensional regional model was used, then a higher productivity of ozone downstream would be simulated.     

Rough Set Rule Induction for Suitability Assessment

The data that characterize an environmental system are a fundamental part of an environmental decision-support system. However, obtaining complete and consistent data sets for regional studies can be difficult. Data sets are often available only for small study areas within the region, whereas the data themselves contain uncertainty because of system complexity, differences in methodology, or data collection errors. This paper presents rough-set rule induction as one way to deal with data uncertainty while creating predictive if–then rules that generalize data values to the entire region. The approach is illustrated by determining the crop suitability of 14 crops for the agricultural soils of the Willamette River Basin, Oregon, USA. To implement this method, environmental and crop yield data were spatially related to individual soil units, forming the examples needed for the rule induction process. Next, four learning algorithms were defined by using different subsets of environmental attributes. ROSETTA, a software system for rough set analysis, was then used to generate rules using each algorithm. Cross-validation analysis showed that all crops had at least one algorithm with an accuracy rate greater than 68%. After selecting a preferred algorithm, the induced classifier was used to predict the crop suitability of each crop for the unclassified soils. The results suggest that rough set rule induction is a useful method for data generalization and suitability analysis.     

Numerical Prediction of Dispersion Characteristics in an Urban Area Based on Grid Refinement and Various Turbulence Models

A detailed simulation of the Goettinger Strasse pollutantdispersion problem is performed using the CFD code CFX-TASCflow for different wind directions. Two turbulencemodels, the k- and the RSM are adopted on three gridrefinement levels. Besides the typical reference gridimplemented by the TRAPOS group, two different gridresolutions are introduced. The first refinement is in thewhole street canyon region on the x-y level, while thesecond one is local in all three directions. Validation ofall involved computational schemes is performed based onrelative available experimental data. The computed velocityfields and concentration contours imply that the typicalreference grid is a suitable choice for the velocityfields, while local grid refinement in all three directionsin a small region containing the receptor is required toupgrade the pollutant concentration results with modestadditional computational effort. Finally the RSM modelresulted in smaller concentration levels. The k-model compared to the RSM seems a more appropriate choiceto solve this particular problem.     

Using the ECLPSS software environment to build a spatially explicit component-based model of ozone effects on forest ecosystems

We have developed a modeling framework to support grid-based simulation of ecosystems at multiple spatial scales, the Ecological Component Library for Parallel Spatial Simulation (ECLPSS). ECLPSS helps ecologists to build robust spatially explicit simulations of ecological processes by providing a growing library of reusable interchangeable components and automating many modeling tasks. To build a model, a user selects components from the library, and then writes new components as needed. Some of these components represent specific ecological processes, such as how environmental factors influence the growth of individual trees. Other components provide simulation support such as reading and writing files in various formats to allow inter-operability with other software. The framework manages components and variables, the order of operations, and spatial interactions. The framework provides only simulation support; it does not include ecological functions or assumptions. This separation allows biologists to build models without becoming computer scientists, while computer scientists can improve the framework without becoming ecologists. The framework is designed to operate on multiple platforms and be used across networks via a World Wide Web-based user interface. ECLPSS is designed for use with both single processor computers for small models, and multiple processors in order to simulate large regions with complex interactions among many individuals or ecological compartments. To test Version 1.0 of ECLPSS, we created a model to evaluate the effect of tropospheric ozone on forest ecosystem dynamics. This model is a reduced-form version of two existing models: , which represents an individual tree, and , which represents forest stand growth and succession. This model demonstrates key features of ECLPSS, such as the ability to examine the effects of cell size and model structure on model predictions.     

Conservation strategies for effective land management of protected areas using an erosion prediction information system (EPIS)

This research demonstrates the predictive modeling capabilities of a geographic information system (GIS)-based soil erosion potential model to assess the effects of implementing land use change within a tropical watershed. The Revised Universal Soil Loss Equation (RUSLE) was integrated with a GIS to produce an Erosion Prediction Information System (EPIS) and modified to reflect conditions found in the mountainous tropics. Research was conducted in the Zenzontia subcatchment of the Río Ayuquíla, located within the Sierra de Manantlán Biosphere Reserve (SMBR), México. Expanding agricultural activities within this area will accentuate the already high rate of soil erosion and resultant sediment loading occurring in the Río Ayuquíla. Two land-use change scenarios are modeled with the EPIS: (1) implementation of soil conservation practices in erosion prone locations; and (2) selection of sites for agricultural expansion which minimize potential soil loss. Confronted with limited financial resources and the necessity for expedient action, managers of the SMBR can draw upon the predictive capacity of the EPIS to facilitate rapid and informed land-use planning decisions.     

A Multimethodological Approach for the Sustainable Management of Perifluvial Wetlands of the Po River (Italy)

/ Marginal aquatic systems (wetlands) of the Po River (Italy) have become the target of a renewed interest because of their value for recreation, natural reserves, and deposits of sand. To preserve these sites, wise management must be the objective of local administrations. In this paper a strategy for the sustainable use of 11 wetlands is presented. It uses simple economic analysis and multiple criteria techniques and provides suggestions to promote sustainability in terms of conservation of natural resources, economic self-sufficiency, and minimization of potential conflicts about the use of the wetlands. In the understanding that sustainability is framed in a long-term perspective, stability analysis is also considered and performed by means of loop analysis, a qualitative technique. Conditions for stability are then discussed about management opportunities.     

基于设备网(DeviceNet)总线技术的矿井瓦斯传感器的设计

介绍瓦斯传感器的国内外研究现状,给出以设备网(DeviceNet)总线构成的瓦斯传感器检测网络结构。简要分析了DeviceNet总线协议特点以及其关键技术,提出具有DeviceNet总线规范的矿井瓦斯传感器的设计及实现方案。硬件电路主要由信号调理电路、数字信号处理器,以及能实现DeviceNet网络通信的接口电路构成,用对象建模的方法构建了矿井瓦斯传感器的对象模型,并用模块化编程技术实现了矿井瓦斯传感器作为一个网络从设备的应用层的软件设计。该传感器作为从设备和带有PCI-CAN网卡的计算机组成主/从连接网络,能对多个矿井瓦斯传感器的数据实现远距离的控制。     

The Use of Carbon and Nitrogen Isotopes to Study Watershed Erosion Processes1

Abstract:  Tracer studies are needed to better understand watershed soil erosion and calibrate watershed erosion models. For the first time, stable nitrogen and carbon isotopes (δ¹⁵N and δ¹³C) and the carbon to nitrogen atomic ratio (C/N) natural tracers are used to investigate temporal and spatial variability of erosion processes within a sub‐watershed. Temporal variability was assessed by comparing δ¹⁵N, δ¹³C, and C/N of eroded‐soils from a non‐equilibrium erosion event immediately following freezing and thawing of surface soils with two erosion events characterized by equilibrium conditions with erosion downcutting. Spatial variability was assessed for the equilibrium events by using the δ¹⁵N and δ¹³C signatures of eroded‐soils to measure the fraction of eroded‐soil derived from rill/interrill erosion on upland hillslopes as compared to headcut erosion on floodplains. In order to perform this study, a number of tasks were carried out including: (1) sampling source‐soils from upland hillslopes and floodplains, (2) sampling eroded‐soils with an in situ trap in the stream of the sub‐watershed, (3) isotopic and elemental analysis of the samples using isotope ratio mass spectrometry, (4) fractioning eroded‐soil to its upland rill/interrill and floodplain headcut end‐members using an unmixing model within a Bayesian Markov Chain Monte Carlo framework, and (5) evaluating tracer unmixing model results by comparison with process‐based erosion prediction models for rill/interrill and headcut erosion processes. Results showed that finer soil particles eroded during the non‐equilibrium event were enriched in δ¹⁵N and δ¹³C tracers and depleted in C/N tracer relative to coarser soil particles eroded during the equilibrium events. Correlation of tracer signature with soil particle size was explainable based on known biogeochemical processes. δ¹⁵N and δ¹³C were also able to distinguish between upland rill/interrill erosion and floodplain headcut erosion, which was due to different plant cover at the erosion sources. Results from the tracer unmixing model highlighted future needs for coupling rill/interrill and headcut erosion prediction models.