固定污染源废气监测中有关问题的探讨

针对废气固定污染源监测中存在的一些疑难问题,从工况的确定、断面的选择、间断排放的监测时间、滤筒及过剩系数的影响等方面进行了探讨,提出了一些解决办法。     

An Experimental Methodology for Monitoring Contaminant Transport Through Geotechnical Centrifuge Models

In this paper, an attempt has been made to highlight an experimental methodology for monitoring contaminant transport through locally available silty soil and commercially available clay in geotechnical centrifuge models, for different compaction states. Use of multiple depth sensors to determine depth distribution of sodium chloride in the soil column has been detailed. The obtained results have been compared with argentometric method. To validate the centrifuge modelling, modelling of models has been used. The test setup developed can simulate contaminant transport mechanisms through the soil mass, which is approximately 10 m deep, over a period of 600 days. R _e and P _e are found to be N times higher in the centrifuge models. These numbers are found to be several orders less than unity. This indicates that laminar flow prevails and the dominating Cl⁻ transport mechanism in centrifuge is diffusion. The study also highlights the fact that the geotechnical centrifuge modelling can be used as a viable alternative to field scale experimentation.     

Temperature Effect on Migration of Zn and Cd Through Natural Clay

To investigate the effect of temperature on effective diffusion coefficients and retardation factors for Zn and Cd, combined diffusion and sequential extraction analyses were conducted at 15 ^˚C and 55 ^˚C. The effective diffusion coefficients of the metals increased up to ten times according to the increased temperature. On the other hand, the effect of temperature on the retardation factor depended on the retention mechanisms of the metals. The distribution coefficient for Zn, which was mainly partitioned in the carbonate phase, increased up to two times with the increase in temperature. On the other hand, the distribution coefficient for Cd, which was mainly partitioned in the exchangeable phase, was hardly affected by the temperature change. Results of combined diffusion and sequential extraction analysis showed that the effect of temperature on the heavy metals’ (Zn and Cd) migration through the compacted natural clay was influenced by the combined effects of the diffusion coefficient and the retardation factor. Additionally, we could also observe the change in retention mechanism for the metals with the change in pore water concentration.     

Physical Modeling of Emissions from Naturally Ventilated Underground Parking Garages

The dispersion of pollutants from naturally ventilated underground parking garages has been studied in a boundary layer wind tunnel. Two idealized model setups have been analysed, one was simulating pollutant dispersion around an isolated rectangular building and one was representing dispersion in a finite array of idealized building blocks. Flow and dispersion close to modelled ground level emission sources was measured. The results illustrate the complexity of the flow around buildings and provide insight in pollutant transport from ground level sources located directly on building surfaces. As a result, areas critical with respect to high pollutant concentrations could be visualized. Particularly, the results show high concentration gradients on the surface of the buildings equipped with modelled emission sources. Inside the boundary layers on the building walls, a significant amount of pollutants is transported to upwind locations on the surface of the building. The paper documents the potential of physical modelling to be used for the simulation and measurement of dispersion close to emission sources and within complex building arrangements.     

载铁改性沸石粉体抑制甲烷/空气扩散火焰试验研究

为发展洁净高效新型粉体灭火介质,以沸石粉体为基体,采用盐酸活化和氯化铁溶液浸泡方法制备载铁改性沸石粉体灭火剂。采用X-射线衍射仪(XRD)、扫描电镜(SEM)和X-射线荧光光谱仪(XRF)等仪器对该粉体灭火剂的结构和形貌进行表征。通过小尺度的杯式燃烧器试验研究载铁沸石粉体对甲烷/空气扩散火焰的灭火效果,并和未改性沸石粉体进行对比。试验结果表明,载铁改性沸石粉体灭火剂的灭火效能明显高于未改性沸石粉体。改性沸石灭火效能提高,主要是由于所负载的铁离子在火焰中转化为活性铁原子,参与清除火焰自由基的催化反应。     

重铬酸钾─三氯化钛法测定水中溶解氧

介绍了三氯化钛（ＴｉＣｌ３）与氧反应，以钨酸钠（Ｎａ２ＷＯ４）作指示剂，用重铬酸钾溶液滴定过剩三氯化钛来测定水中溶解氧的方法。本法与碘量法比较，结果表明方法准确、快速，适合于水样中溶解氧的测定     

大气污染物影响因素的灰色关联分析

运用灰色系统理论，对产生和影响城市大气主要污染物的相关因素，利用灰色关联分析方法进行了量化分析研究，根据研究结果，提出了控制大气污染的防治对策．     

全氟辛烷磺酰基化合物(PFOS)类有机污染物在生物体中的污染现状

以全氟辛烷磺酰基化合物(Perfluorooctanesulphonate,PFOS)为代表的全氟化合物是一类新型持久性环境污染物,因在生产生活中的广泛使用而长期存在于环境中,目前已成为一种全球性污染物.近年来对PFOS等物质的污染检测已经从水土环境转向了生物有机体,在鸟类、鱼类、海洋动物、哺乳动物、人类等各个层次上的生物均已开始了广泛的检测分析.北美、欧洲、日本、中国等国是受此类物质污染程度较高并且研究报道较多的区域.论文总结了PFOS在上述地区不同生物体和不同人群的污染现状及暴露水平,为全面了解并控制PFOS污染提供了基础依据.     

沈阳地区霾的环境特征研究

利用沈阳市1961—2009年的气象资料,分析了霾天气出现的年季特征及其天气形势特征。利用边界层气象资料与污染物质量浓度资料对特定的霾过程从边界层到污染物质量浓度条件进行了分析。结果表明：沈阳地区霾的出现呈现逐年上升的趋势,近5 a平均每年为120 d左右,目前霾天数已经占到了全年的30%~40%。冬秋季节出现霾天气较多,秋冬两季霾日数占全年霾日总数的75%。凌晨到上午是霾出现的高发期,02—08时霾出现频率占总霾数的44.5%。霾的出现主要发生在冬秋季节冷空气势力不强,大气扩散能力较弱,边界层出现逆温时刻。接地逆温层厚度常常稳定在200~300 m高度左右,PM10质量浓度与能见度（霾）呈负相关,相关系数-0.402 7。风速与能见度（霾）呈正相关,相关系数为0.886 4。     

Biosorption of Cr(III) from aqueous solution by freeze-dried activated sludge: Equilibrium,kinetic and thermodynamic studies

Batch biosorption experiments were conducted to remove Cr(III) from aqueous solutions using activated sludge from a sewage treatment plant. An investigation was conducted on the effects of the initial pH, contact time, temperature, and initial Cr(III) concentration in the biosorption process. The results revealed that the activated sludge exhibited the highest Cr(III) uptake capacity (120 mg·g⁻¹) at 45°C, initial pH of 4, and initial Cr(III) concentration of 100 mg·L⁻¹. The biosorption results obtained at various temperatures showed that the biosorption pattern accurately followed the Langmuir model. The calculated thermodynamic parameters, ΔG^o (−0.8– −4.58 kJ·mol⁻¹), ΔH^o (15.6–44.4 kJ·mol⁻¹), and ΔS^o (0.06–0.15 kJ·mol⁻¹·K⁻¹) clearly indicated that the biosorption process was feasible, spontaneous, endothermic, and physical. The pseudo first-order and second-order kinetic models were adopted to describe the experimental data, which revealed that the Cr(III) biosorption process conformed to the second-order rate expression and the biosorption rate constants decreased with increasing Cr(III) concentration. The analysis of the values of biosorption activation energy (E_a = −7 kJ·mol⁻¹) and the intra-particle diffusion model demonstrated that Cr(III) biosorption was film-diffusion-controlled.