脉冲电晕等离子体脱硫脱氮与除尘技术

脉冲电晕放电是产生等离子体的方法之一，目前已达到工业性试验阶段，该文对脉冲电晕等离子脱硫脱氮与除尘技术的形成过程进行了回顾，对其理论作了分析，并简介了工艺流程，还指出了目前存在的主要问题和需研究的关键技术。     

水葫芦对Zn2+、Cd2+和Fe3+的去除速率

通过静态水培实验和原子吸收分光光度法的测定,发现水葫芦对个别重金属离子累积去除率头两天为Zn≈Cd>Fe,以后为Fe>Zn>Cd;5天中,Cd2 在水葫芦老黄茎叶中的积累量增长了130 0倍;在混合离子培养液中,Zn2 的去除速率明显下降,而Cd2 和Fe3 变化不明显。表明水葫芦在治理含镉废水方面有良好的应用前景。     

Developing Canada's National Forest Carbon Monitoring, Accounting and Reporting System to Meet the Reporting Requirements of the Kyoto Protocol

The rate of carbon accumulation in the atmosphere can be reduced by decreasing emissions from the burning of fossil fuels and by increasing the net uptake (or reducing the net loss) of carbon in terrestrial (and aquatic) ecosystems. The Kyoto Protocol addresses both the release and uptake of carbon. Canada is developing a National Forest Carbon Monitoring, Accounting and Reporting System in support of its international obligations to report greenhouse gas sources and sinks. This system employs forest-inventory data, growth and yield information, and statistics on natural disturbances, management actions and land-use change to estimate forest carbon stocks, changes in carbon stocks, and emissions of non-CO₂ greenhouse gases. A key component of the system is the Carbon Budget Model of the Canadian Forest Sector (CBM-CFS). The model is undergoing extensive revisions to enable analyses at four spatial scales (national, provincial, forest management unit and stand) and in annual time steps. The model and the supporting databases can be used to assess carbon-stock changes between 1990 and the present, and to predict future carbon-stock changes based on scenarios of future disturbance rates and management actions.     

沸石在水处理中的应用

本文介绍了中国沸石的种类及其分布概况，以产自甘肃省白银市的斜发沸石为研究对象，对其化学组成及分子晶格形式作了较为详尽的阐述，经实验室检测出其化学组成及物化指标，且对沸石作为吸附剂、离子交换剂、催化剂处理废水的作用机理进行了深入的探讨，对于天然沸石改性进行了实验研究，得出采用氯化钠溶液对天然沸石改性的效果比较理想，改性溶液的最佳浓度为0．9mol/L。研究沸石在沸水处理领域中的应用，分析了沸石处理各类废水的机理，并对沸石处理废水的前景进行了展望。     

Carbon Dioxide Balance of Wood Substitution: Comparing Concrete- and Wood-Framed Buildings

In this study a method is suggested to compare the net carbon dioxide (CO₂) emission from the construction of concrete- and wood-framed buildings. The method is then applied to two buildings in Sweden and Finland constructed with wood frames, compared with functionally equivalent buildings constructed with concrete frames. Carbon accounting includes: emissions due to fossil fuel use in the production of building materials; the replacement of fossil fuels by biomass residues from logging, wood processing, construction and demolition; carbon stock changes in forests and buildings; and cement process reactions. The results show that wood-framed construction requires less energy, and emits less CO₂ to the atmosphere, than concrete-framed construction. The lifecycle emission difference between the wood- and concrete-framed buildings ranges from 30 to 130 kg C per m² of floor area. Hence, a net reduction of CO₂ emission can be obtained by increasing the proportion of wood-based building materials, relative to concrete materials. The benefits would be greatest if the biomass residues resulting from the production of the wood building materials were fully used in energy supply systems. The carbon mitigation efficiency, expressed in terms of biomass used per unit of reduced carbon emission, is considerably better if the wood is used to replace concrete building material than if the wood is used directly as biofuel.     

氨法烟气脱硫脱硝的技术特征

氨法烟气脱硫脱硝具有显著的技术优势:脱硫效率高,脱硫脱硝一举两得,不耗费热量不产生废渣,脱硫剂利用充分用量小,不损害设备有节能功效。脱硫剂利用率可达90%以上,脱硫效率可达90%以上、脱硝效率可达80%以上;脱硫剂用量是钙法工艺的十到二十分之一;副产物为可以直接利用的化学肥料,而非难于处置的废渣。     

乙烯废碱液综合治理技术探讨

分析了乙烯裂解气碱洗过程所排放废液的组成及性质，讨论了该废液的除油方法及综合治理和利用的途径。     

甲硫醚废气制取二甲基亚砜技术研究

选择双氧水作氧化剂，将具有恶臭气味的涕灭威生产的副产物甲硫醚氧化成无臭的二甲基亚砜。通过实验，优化了工艺条件，减少了安全隐患，提高了二甲基亚砜的产率，消除了恶臭污染。     

催化燃烧法处理炼油污水处理场臭气

介绍了污水处理场臭气来源、危害和影响，从技术、经济和环境效益等方面对几种处理方法进行了比较，提出了采用催化燃烧法的技术实施方案。     

孔板结构脱硫脱水性能的试验研究

通过真实规模的试验台对应用于烟气湿法脱硫洗涤塔中的孔板结构进行了脱硫、脱水效果的试验研究 ,得出了孔板结构与其他结构的脱硫效率间的差异 ,比较了不同结构孔板的脱水效率 ,并进行了理论分析