Effect of sunlight radiation,rainfall and droplet spectra of sprays on persistence of bacillus thuringiensis deposits after application of dipel® 76af formulation onto conifers

Abstract

The effect of sunlight radiation, rainfall and droplet spectra of sprays on per ‐sistence of a Bacillus thuringiensis subspp. kurstaki (Btk) formulation, DiPel^® 76AF, was examined after application onto spruce [Picea glauca (Moench) Voss] foliage. The investigation consisted of three studies: (i) Study I: a laboratory microcosm study to examine the photostability of DiPel 76AF deposits on foliage after different periods of exposure to two radiation intensities, (ii) Study II: a laboratory microcosm study to examine the rainfastness of foliar deposits after exposure to different amounts of rainfall consisting of two separate droplet spectra, and (iii) Study III: a field microcosm study to investigate the influence of two different droplet spectra of DiPel 76AF sprays on foliar persistence of Btk under natural weathering conditions. In all studies, persistence of Btk was investigated both by bioassay [using spruce budworm (Choristoneura fumiferana Clemens)] and total protein assay.

The findings of Study I indicated that bioactivity of foliar deposits decreased with increasing duration of exposure to radiation, and with increasing radiation intensity. The half‐life (DT₅₀, the exposure period required for 50% of the initial bioactivity to disappear) was 5.1 d for the low intensity, and 3.9 d for the higher intensity. In contrast with the bioassay results, the total protein levels [determined by the bicinchoninic acid (BCA) method] showed no decrease with increasing duration of exposure, or with increasing radiation intensity.

The findings of Study II indicated that bioactivity of foliar deposits decreased with increasing cumulative rainfall. A new term, RF₅₀ [the amount of rain (in mm) required to washoff 50% of the initial deposit], was introduced to understand the relationship between rainfall intensity and reduction in bioactivity. When the same amount of rain was applied in different droplet sizes, the RF₅₀ value was high (5.2 mm) for the small rain droplets, and was low (2.9 mm) for the large rain droplets. Similar to the bioassay results, the total protein concentrations (determined by the BCA method) decreased with increasing amount of rain and with increasing rainfall intensity. The RF₅₀ value (obtained using ng protein /cm²) was 5.4 mm for the small rain droplets, and was 3.4 mm for the large rain droplets.

The field microcosm study indicated that when DiPel 76AF was applied in small droplets (D_v.5 of 65 μm), the persistence of bioactivity was ca 8.0 d, whereas when it was applied in large droplets (D_v.5 of 130 nm) it was ca 11 d. Bioactivity decreased with time after spray, and the DT₅₀ was 1.98 d for the spray of small droplets, and 2.87 d for that of large droplets. Similar to the bioactivity, the total protein concentrations also decreased with time after spray, and the DT₅₀ values for the small and large droplet spectra were 3.45 and 6.07 d respectively.     

四川省农业生产环境压力分析

研究主要采用产排污系数法,分析了2012年四川省农业投入品使用量及残留量,以及主要农业残留物产量,以咨环境管理参考。结果发现,四川全省化肥施用强度、农药使用强度和农用塑料薄膜残留量较大,化肥施用强度超标;年末作物秸秆产量3504.2万吨,焚烧(焚烧比20%)排放的细颗粒物质和总悬浮颗粒物超过4.0万吨;主要粪便污染物是COD与总氮,粪肥年施氮量及总磷均超过还田限值。农业稳定增产条件下,农业环境压力将持续增加。     

兰炭生产过程中固体废物的产生与利用现状分析

在对国内兰炭生产工艺流程应用及现状介绍的基础上,概括总结了旧式低温干馏阶段和现阶段兰炭生产过程中固体废物的产生节点、种类、性质和主要处置方式。结果表明,旧式低温干馏阶段,兰炭生产过程中产生的固体废物主要包括煤筛分破碎工序产生的末煤和煤矸石、筛焦工序产生的焦粉、焦油冷却收集系统产生的焦油渣等;现阶段,兰炭生产过程中产生的固体废物主要包括煤筛分破碎工序产生的末煤和煤矸石以及破碎过程中经除尘器收集的煤尘、筛焦工序产生的焦粉、废水处理污泥、焦油冷却收集系统产生的焦油渣、脱硫工序产生的脱硫残液等。其中末煤、煤矸石、煤尘、焦粉作为一般工业固废全部综合利用,废水污泥、焦油渣、脱硫残液主要掺入原料煤中自行消化处置。     

液质联用测定番茄中甲基硫菌灵残留量

为了评价70％甲基硫菌灵可湿性粉剂在番茄中的使用安全性,开展甲基硫菌灵在番茄中的残留量研究。本文建立了分散固相萃取前处理,高效液相色谱/质谱联用法测定甲基硫菌灵在番茄中残留量的方法。样品经乙腈提取,乙二胺-N-丙基甲硅烷（PSA）和无水硫酸镁混合振荡离心除去杂质和水分,上清液用配有电喷雾（ESI）源的高效液相色谱/质谱联用仪测定。田间试验结果建议在番茄上喷施70％甲基硫菌灵可湿性粉剂562.5 g ai·hm^-2,3次施药,推荐安全间隔期为3 d;市场抽检样品检测表明番茄中甲基硫菌灵的残留量均小于0.05 mg·kg^-1,低于最大残留限量3 mg·kg^-1。     

Economic assessment of producing a fluting paper using agricultural residues – a case study: Iran,Mazandaran Province

Given limited forest resources and increased paper consumption and imports, establishing fluting paper mills using non-wood raw materials seems more essential than ever. This paper aims to investigate, technically and economically, the possibility of establishing a fluting paper mill (with a capacity of 10,000 tons a year) from agricultural residues in Iran's Mazandaran province. The average annual agricultural residues output (including wheat, barley, rice, corn, oil seeds and cotton) in the province was about 1.3 million tons from 2000 to 2010, showing the potential of the province as an appropriate source for providing raw material from agricultural residues. For economic evaluation of the project, economic indices such as rate of return, pay-back period and production break-even point were measured. The results indicated that establishing a fluting paper mill based on agricultural residues is feasible.     

Processing of Straw/Corn Stover: Comparison of Life Cycle Emissions

The LCA emissions from four renewable energy routes that convert straw/corn stover into usable energy are examined. The conversion options studied are ethanol by fermentation, syndiesel by oxygen gasification followed by Fischer Tropsch synthesis, and electricity by either direct combustion or biomass integrated gasification and combined cycle (BIGCC). The greenhouse gas (GHG) emissions of these four options are evaluated, drawing on a range of studies, and compared to the conventional technology they would replace in a western North American setting. The net avoided GHG emissions for the four energy conversion processes calculated relative to a “business as usual” case are 830 g CO₂e/kWh for direct combustion, 839 g CO₂e/kWh for BIGCC, 2,060 g CO₂e/L for ethanol production, and 2,440 g CO₂e/L for FT synthesis of syndiesel. The largest impact on avoided emissions arises from substitution of biomass for fossil fuel. Relative to this, the impact of emissions from processing of fossil fuel, e.g., refining of oil to produce gasoline or diesel, and processing of biomass to produce electricity or transportation fuels, is minor.     

Preparation of agricultural residue anion exchangers and its nitrate maximum adsorption capacity

Anion exchangers were prepared from different agricultural residues (AR) after reaction with epichlorohydrin and dimethylamine in the presence of pyridine and N,N-dimethylformamide (EDM method). Agricultural residues anion exchangers (AR-AE) produced by the EDM method were inexpensive and showed almost the same NO₃⁻ removal capacities as Amberlite IRA-900. AR-AE produced from AR with higher hemicelluloses, lignin, ash and extractive contents resulted in the lower yields. Sugarcane bagasse with the highest -cellulose contents of 51.2% had the highest yield (225%) and lowest preparation cost. The highest maximum adsorption capacity (Q_max) for nitrate was obtained from rice hull (1.21 mmol g⁻¹) and pine bark natural exchangers (1.06 mmol g⁻¹). No correlation was found between Q_max and -cellulose content in the original AR. AR-AE produced from different AR demonstrated comparable Q_max due to the removal of non-active compounds such as extractives, lignin and hemicelluloses from AR during the preparation process. Similar preparation from pure cellulose and pure alkaline lignin demonstrated that the EDM method could not produce anion exchangers from pure lignin due to its solubilization after the reaction with epichlorohydrin.     

Pesticide residues in products of plant origin in the European Union

The results of a co-ordinated monitoring programme for pesticide residues in the European Union and Norway carried out in 1996 and 1997 are presented. The aim of this programme is to work towards a system, which makes it possible to estimate actual dietary pesticide intake for the population of the European Union. Based on a statistically dérived sampling plan and within the limited number of pesticides/commodities analysed, the most critical pesticides (benomyl group and dithiocarbamates) and commodities (mandarine and lettuce) were identified. In case of detected non-compliances, repeated sampling and, if necessary, enforcement actions are to be taken by national authorities. The programme will be continued in the next years.     

Landbased Pollution Sources and Marine Environmental Quality in the Caribbean

The near shore coastal and marine environment of several Caribbean islands is their most biologically productive and economically important zone. However, almost all landbased activities possess the real potential of degrading the quality of near shore waters and ultimately diminishing the utility of the marine resource. This condition is largely attributed to the individual smallness of the islands and their geographic proximity to each other.

Available sanitary water quality data from across the region indicated that while recreational areas are in general safe for water contact activities, bacterial densities in excess of several international criteria are consistently recorded in harbours. Organochlorine pesticide residues were generally in the 5 ng l^-1 range in unfiltered sea water but were significantly higher (1-100) ng g^-1 in limited samples of sediment and biota. Additional data requirements to gain further insight into the current state of the Caribbean environment are also identified.

A summary of the major land based sources of marine pollution (including sewage, industrial effluents and agricultural run-off) in the insular Caribbean is presented.     

Distribution of Organo-Chlorine Pesticides (DDT and HCH) Between Plant and Soil System

This paper reports a study of the distribution of organo-chlorine pesticides (DDT and HCH) between rice plants and the soil system by spraying before the heading stage at four different dosage levels – control, normal dosage (15 kg ha^–1 of 6% HCH and 7.5 kg ha^–1 of 25% DDT), double dosage and four times dosage. Soil and plant samples were taken respectively at the 1st h, 3rd, 10th, 20th, and 40th day after spraying and at the harvest time. The results indicate that less than 5% of HCH and 15% of DDT were absorbed by the surface of rice leaves for normal dosage. Most of both pesticides moved into the soil in solution after spraying. Compared with DDT, HCH was degraded and run off more easily. HCH residues in the surface soil layer (1–3 cm) were already below 6.4 g kg^–1 at the mature stage, lower than Chinese Environmental Quality Standard for Agricultural Soils: HCH <0.05 mg kg^–1. However DDT residues in the surface soil layer remained 172 g kg^–1, higher than the national standard: DDT <0.05 mg kg^–1. According to the test f OCP residues in rice seeds, it can be concluded that the OCP sprayed onto the surface of rice leaves can move into rice plants and accumulate in the seeds at the mature stage. HCH residues in rice seeds of the double and four times dosage treatments, and DDT residues in all treatments, exceeded the Chinese National Food Standard (HCH <0.10 mg kg^–1, DDT <0.20 mg kg^–1).