一种基于预测法的电磁兼容设计方法

文章以数模混合电路设计实践为基础,介绍了一种基于预测法的电磁兼容设计方法。先以电磁兼容测试理论为基础介绍数模混合电路设计中的电磁兼容方法,在以此方法建立电磁兼容设计模型,并通数模混合电路实践来检验和改进设计模型。     

大港油田苦咸再生水反渗透工艺自动控制研究

分析了大港油田污水回用深度处理工程苦咸再生水反渗透工艺仪表配置及自动控制方式,介绍了苦咸再生水反渗透系统亟待解决的各类问题。着重论述了仪表设置、余氯控制、结垢污堵控制、微生物污堵控制的实际运行方式,探讨了苦咸再生水反渗透工艺的技术可行性和可靠性。     

钙基脱硫剂孔隙中SO2气体非线性扩散的研究

以动态生成的CaO孔隙网络为骨架,按照不退行随机行走模型（NRRW）,模拟气体分子在CaO孔隙中的扩散过程,计算了SO2分子的扩散系数和行走维数,并在SO2非线性扩散反应方程基础上,分析了CaO颗粒孔隙中SO2浓度的分布特性。     

A Monte Carlo study of radon detection in cylindrical diffusion chambers

The functioning of radon diffusion chambers was studied using the Monte Carlo code RAMMX developed here. The alpha particles from radon are assumed randomly produced in the volume of the cylinder, and those from the progeny are assumed to originate randomly at the cylindrical surface. The energy spectrum, the distribution of incident angles, and the distribution of path lengths of the alpha particles on the detector were obtained. These quantities vary depending on input parameters such as initial alpha particle energy, radius and depth of the diffusion chamber, detector size and atmospheric pressure. The calculated energy spectrum for both ²²²Rn and ²²⁰Rn was compared with experiment, permitting the identification of each peak and its origin, and a better understanding of radon monitoring. Three aspects not considered in previous calculations are progeny alphas coming from surfaces of the monitor, taking into account the atmospheric pressure, and including the isotope ²²⁰Rn.     

三苯类废气处理进展

综述了近年来三苯类废气处理所采用的方法,如吸收法、吸附法、催化氧化法、生物法、光催化法和低温等离子体法等,对各种方法的处理机理、处理效果以及优缺点进行了概括和分析,并指出联用技术将是未来的发展方向.     

制药废水有机污染物特性分析与处理

分析了某制药企业废水生物处理站进出水中有机污染物的相对分子质量分布和气相色谱—质谱图谱,提出了根据废水水质特性有针对性地确定制药废水处理工艺的新思路.实验结果表明:进出水中的有机污染物主要是相对分子质量小于1 000的物质,且主要来源于车间5排放的COD比重大、水量小的工段废水;采用旋转蒸馏预处理法处理车间5废水,可使...     

Fuel efficiency improvement of a dual-fuel engine fuelled with Honge oil methyl ester (HOME)–bioethanol and producer gas

Renewable and alternative fuels have numerous advantages compared with fossil fuels as they are renewable and biodegradable and provide food and energy security and foreign exchange savings besides addressing environmental concerns and socio-economic issues (Yaliwal et al. 2013. International Journal of Sustainable Engineering, doi:10.1080/19397038.2013.801530. Zhu et al. 2011a, Applied Thermal Engineering 31 (14–15): 2271–2278; Zhu et al. 2011b, Fuel 90: 1743-1750; Banapurmath, Tewari, and Hosmath 2008, Renewable Energy 33: 2007-2018; Banapurmath 2009, “Performance, Combustion and Emission Characteristics of a Single Cylinder Direct Injection CI Engine Operated on Dual Fuel Mode Using Honge Oil and Producer Gas.” PhD thesis, 1–195; Banapurmath et al. 2011, Waste and Biomass Valorization 2: 1–11). In this context, the main objective of the present work is to study methods of biofuel production such as Honge oil methyl ester (HOME) using a conventional transesterification process and bioethanol from the Calliandra calothyrsus shrub using a new pretreatment method known as hydrothermal explosion. Further, experimental investigations were carried out on a single-cylinder, four-stroke, direct-injection stationary diesel engine operating in a dual-fuel mode using HOME, bioethanol and producer gas combinations to determine its performance, combustion and emission characteristics. The performance of the dual-fuel engine was analyzed at optimized engine conditions. HOME-Bioethanol (BE) blends such as HOME+ 5% bioethanol (BE5), HOME+ 10% bioethanol (BE10) and HOME+ 15% bioethanol (BE15) were prepared by adding bioethanol to HOME (on volume basis) in different proportions ranging from 5 to 15% with an increment of 5%. In this present work, the effect of different BE blends on the performance of producer gas fuelled dual fuel engine was studied. Experimental investigation on dual fuel engine using BE5-Producer gas operation resulted in up to 4–9% increased brake thermal efficiency with decreased hydrocarbon (HC), carbon monoxide (CO) and marginally increased nitric oxide (NOx) emission levels compared to HOME-Producer gas, BE10-producer gas and BE15-producer gas mode of operation. However, it was observed that, the overall performance of BE-producer gas operation was found to be lower compared to diesel-producer gas operation.     

基于GIS和组合赋权法的农村生态功能适宜性评价及管制分区

在村级土地利用规划过程中进行生态功能适宜性评价,以了解农村生态质量状况、明确农村生态功能适宜程度及空间分布,为村级土地利用规划中土地利用方向的确定和空间布局的划分提供科学的生态适宜依据,从而更好地协调农村发展建设和生态环境保护的关系有着至关重要的作用。以岩南村为例,开展了农村生态功能适宜性评价及应用研究。以高分辨率航空影像为数据源,从地形条件、土壤资源、生物资源、水资源、人类干扰5个方面建立了评价指标体系;利用组合赋权法确定各评价因子的权重值,构建了生态功能适宜性评价模型;以栅格为评价单元,在GIS支持下,对岩南村进行生态功能适宜性评价。并根据评价结果划分了生态功能适宜等级,制定了分区管制措施,提出了土地利用建议,旨在为岩南村土地利用规划提供指导     

青藏铁路沿线格尔木-南山口段环境地质评价

通过对青藏铁路沿线格尔木-南山口段环境地质背景及环境地质问题的调查,环境地质背景因子选择为岩土结构、断裂发育程度、水质水量;环境地质问题因子选择为沙漠化、土壤盐渍化、污染源;评价集选择优、良、中、差;利用二级层次分析-模糊综合评价法得出了青藏铁路沿线格尔木-南山口段的环境地质质量评价等级图,不同环境地质等级分布面积分别占总面积的25.2%、53.6%、3.5%、17.5%。     

Subcritical water oxidation of propham by H2O2 using response surface methodology (RSM)

This study was conducted to investigate the degradation of propham, which is a compound that pollutes water and seriously threatens human health, by subcritical water oxidation and using H₂O₂ as an oxidising agent. The maximum total organic carbon removal rate of propham was obtained as 73.65% at 40 min of treatment time and 60 mM of H₂O₂ concentration and 373 K of temperature. In addition, response surface method based on the Box-Behnken design was applied to design the degradation experiments of propham for determination of the combined effects of process variables, namely temperature, concentration of oxidising agent and treatment time. The proposed quadratic model of propham degradation, which was examined with the analysis of variance, was used for navigating the design space. The R² and adjusted R² values of the model were determined as 0.9921 and 0.9819 respectively. It was shown that propham was effectively degraded, thus could be removed from the water by using an environmentally friendly method.