分类收集蔬菜垃圾与植物废弃物混合堆肥工艺实例研究

以分类收集的生活垃圾(主要为蔬菜垃圾)和破碎树枝为原料,采用条垛式堆肥工艺,在中试规模条件下考察了原料初始含水率、通风频率、翻堆频率、接种比例4种因素对混合堆肥效果的影响.同时,在试验的9种工况下,对温度、氧浓度、有机碳降解率、有机碳氮比(C/N)、腐殖质含量等指标进行测定.结果表明,堆肥42d时各堆体均已达到稳定化要求.经过比较肥分保持、腐殖化程度和能量投入等指标,获得的最优堆肥控制条件为:初始含水率65%,通风频率15min/60min(开/关),翻堆频率为每3d1次,产物接种比例5%.最优控制方案下的主发酵通风率仅为0.03L.min-1.kg-1(以VS计),可实现堆肥过程的低能耗,适合于我国村镇区域的应用条件.     

煤矿岗前人员不安全状态智能检测系统研究——以红柳林煤矿为例

为从根本上降低煤矿从业人员实施不安全行为的概率,在充分考虑煤矿从业人员不安全个体状态是诱发其不安全行为的主要原因的基础上,设计开发一套矿工不安全状态智能检测系统。首先,对2007—2022年期间各高危行业安全事故调查报告和专家研究进行归纳,总结得出煤矿从业人员不安全状态的影响因素,构建包括生理状态、心理状态以及个体能力状态在内的3个一级指标和15个二级指标体系;其次,通过相应的表征模型对不安全状态影响因素进行深入剖析;最后,基于构建的从业人员不安全状态倾向数据库,建立煤矿岗前不安全状态智能检测系统。研究结果表明：在下井工作前对从业人员个体状态进行智能检测,能够实现矿工不安全状态“早发现、早干预”,能够有效地降低人因事故发生率,研究结果对煤炭行业安全管理具有重要的参考价值。     

爆炸超压场景下危化品社会风险对允许规划人口密度的影响分析*

为研究危化品重大危险源基于社会风险基准的规划管控影响,采用我国标准规定的定量风险评价方法,TNT当量炸药简化方法,针对最大TNT当量炸药、事故发生总累计频率、人口密度分布控制参数等不同工况条件,对比分析国土开发强度的允许人口密度受社会风险约束影响的变化规律。研究结果表明:人口密度指数分布控制参数Nk与Nb的允许取值随最大TNT当量炸药和事故发生总累计频率降低而提高;确定工况下,允许总人口规模受最大TNT当量炸药影响很小;在最大TNT当量炸药大于100 t或事故发生总累计频率小于1×10-8次/a时可按最大事故场景进行规划控制分析。     

煤与瓦斯突出过程中煤体层裂演化特征实验研究

为了探究煤与瓦斯突出过程中煤体层裂演化特征,利用自主研制的煤与瓦斯突出实验模拟系统,研究突出过程中煤体层裂结构特征、煤体裂隙厚度演化特征和煤体质点运动演化特征。研究结果表明：在轴向应力0.9 MPa、瓦斯压力0.4 MPa时,煤体层裂发展时间持续85 ms,煤体共计出现11处裂隙。层裂从煤体后方的弱构面出现并向前方发展,其位置大多集中于突出腔体中后部,煤体层裂形式均为纵向贯通,在第9处出现最大纵向断裂裂隙。煤体裂隙总厚度约为75.6 mm、单处裂隙平均厚度约为8.4 mm,二者均呈现随时间递增的趋势。层裂过程中煤体单处裂隙厚度并不都是沿程递增的,部分煤体中部裂隙厚度呈现先增大后减小的特征。煤体的运动表现为靠近突出口端的运动速度更快、运动距离也更长。研究结果可为揭示煤与瓦斯突出层裂机制提供参考。     

复杂地下空间交通体系连接匝道烟气控制方案研究

复杂地下空间交通体系作为新型地下交通形式,车流量大且存在多个分合流点,气流组织复杂,防灾排烟难度极大。以杭州某复杂地下空间交通体系连接匝道为研究背景,提出匝道通风排烟设计方法,再选取其中二合一式连接匝道结构,采用FLUENT模拟其两种防灾排烟方案的有效性。模拟结果表明：两个连接匝道末端单独设置排烟口的设计方案可有效保证火源下游车辆和火源上游人员的逃生安全;根据分合流流速分配理论模型,在合流处只设置一个排烟口且排烟量提高40 m³/s时,也可达到同样的防灾排烟效果,从土建成本考虑,推荐此方案,为同类型隧道结构提供借鉴。     

A disaster scene simulation system in 3D for oil transmission stations: Design and implementation

The disaster scene in three-dimensional (3D) plays a crucial role in disaster emergency management and risk communication of oil transmission stations. However, existing research for the disaster scene mainly focuses on reproducing the disaster environment and rarely predicts the damage state of the disaster-affected object. This paper proposes an object-oriented modeling method that utilizes a multilevel decomposition pattern for disaster scenes. This method combines earthquake vulnerability assessment with 3D visualization technology to predict and characterize the damage state of critical infrastructure in oil transmission stations. To enhance earthquake risk perception, a simulation system is designed and developed, which allows for the construction of virtual scenes and quick simulation of disaster scenes in 3D. The case application shows that the system improves the 3D modeling efficiency of disaster scenes and enhances public awareness of earthquake risks. The simulation system can provide technical support for seismic mitigation planning and emergency management decision-making at oil transmission stations and has good application prospects.     

Dynamic-risk-informed safety barrier management: An application to cost-effective barrier optimization based on data from multiple sources

An integrated approach for performance assessment and management of safety barriers in a systemic manner is needed concerning the prevention and mitigation of major accidents in chemical process industries. Particularly, the effects of safety barriers on system risk reduction should be assessed in a dynamic manner to support the decision-making on safety barrier establishments and improvements. A simulation approach, named Simulink-based Safety Barrier Modeling (SSBM), is proposed in this paper to conduct dynamic risk assessment of chemical facilities with the consideration of the degradation of safety barriers. The main functional features of the SSBM include i) the basic model structures of SSBM can be determined based on bow-tie diagrams, ii) multiple data (periodic proof test data, continuous condition-monitoring data, and accident precursor data) may be combined to update barrier failure probabilities and initiating event probabilities, iii) SSBM is able to handle uncertainty propagation in probabilistic risk assessment by using Monte Carlo simulations, and iv) cost-effectiveness analysis (CEA) and optimization algorithms are integrated to support the decision-making on safety barrier establishments and improvements. An illustrative case study is demonstrated to show the procedures of applying the SSBM on dynamic risk-informed safety barrier management and validate the feasibility of implementing the SSBM for cost-effective safety barrier optimization.     

A data-driven narratives skeleton pattern recognition from accident reports dataset for human-and-organizational-factors analysis

Accidents in the process industry involve several interacting factors, including human and organizational factors (HOFs). A long-standing obstacle to HOFs analysis is lack of data. Accident reports are an essential data source to learn from the past and contain HOFs-related data, but they are usually unstructured text in a not standardized format. Some studies have explored the extraction of information automatically from accident reports based on Natural Language Processing (NLP) techniques. However, they were not dedicated to HOFs. Risk communication is considered an essential pillar in safety and risk science. This research develops a HOFs-focused risk communication framework based on the NLP techniques that can support risk assessment and mitigation. The proposed approach automatically extracts the target groups oriented “Who, When, Where, Why” (4Ws) information from accident reports.This framework was applied to explore the eMARS database. The results show that the “4Ws” skeleton of narratives has appreciated performance in pattern recognition and holistic information analysis. The graphical representation interfaces are designed to display the features of HOFs-related accidents, which can better be communicated to the sharp-end operators and decision-makers.     

Simulation of scenario characteristics of LPG tank explosion accident and its contribution to emergency planning: A case study

Leakage and explosion of hazardous chemicals during road transportation can cause serious building damage and casualties, and adoption of highly-efficient emergency rescue measures plays a critical role in reducing accidental hazards. Considering a liquefied petroleum gas (LPG) transport tanker explosion accident that occurred in Wenling, Zhejiang Province, China on June 13, 2020 as example, this study proposes a risk assessment framework. This framework recreates the leakage and explosion of the accident process using FLACS v10.9, suggests plans for evacuation, describes the rescue areas of different levels, and explores the influence of environmental factors on the evacuation and rescue areas. The results show that simulated and predicted distributions of fuel vapour cloud concentration and explosion overpressure can provide a reference basis for rapid rescue activities; the characterization of the dynamic effects of wind speed, wind direction, and temperature with respect to the evacuation and rescue areas can be used as theoretical support for on-site adjustment of rescue forces. The role of obstacles can prevent the expansion of the evacuation areas under low wind-speed conditions, and the presence of highly congested obstacles determines the level of the rescue area. The results obtained are important for the risk analysis and the development of emergency rescue measures in case of explosion accidents associated with transportation of hazardous chemicals on high-hazard and high-sensitive road sections.     

城市可持续发展环境经济评价及案例

基于城市发展测度演变的分析、明确真实储蓄作为城市可持续发展综合评价指标的经济学含义和政策意义：并针对世界银行在地区真实储蓄测算方法上的不足,重点探讨在真实储蓄测算中如何考虑城市开放性、资源折旧、环境污染损失评估计算的界定问题。文中还以烟台市为试点城市,利用真实储蓄及相关指标评价了该市不同发展时期的可持续发展水平。