石棉表面改性对石棉诱导人胚肺细胞产生羟基自由基的影响

为了研究用柠檬酸铝、混合稀土或亚硒酸钠预处理温石棉对石棉诱导人胚肺(HEL)细胞产生羟基自由基(·OH)的影响,笔者用不同浓度的柠檬酸铝、混合稀土或亚硒酸钠溶液浸泡温石棉1小时后,再将其与人胚肺细胞共同孵育,利用电子自旋捕获法测定反应体系中羟基自由基信号。结果显示,石棉可诱导人胚肺细胞产生羟基自由基,并且所产生的自由基信号(峰高)随石棉浓度升高而增强,呈一定的剂量依赖性。经3种化合物预处理的温石棉组人胚肺细胞所产生的自由基信号(峰高)均明显低于未处理温石棉组。上述结果表明,温石棉可诱导人胚肺细胞产生羟基自由基,但用3种化合物预处理温石棉,均可抑制温石棉诱导人胚肺细胞产生羟基自由基。     

History and Development of the NRCS Lag Time Equation1

Abstract: Many of the hydrologic methods that are used in engineering practice today resulted from the Spring Flood of 1936, which blanketed the Northeastern portion of the United States. Because of the flood damage that was caused by this rainfall‐snowmelt event, many federal agencies including the U.S. Army Corp of Engineers and the Soil Conservation Service (SCS) implemented the hydrologic theories that were available in the literature at this time and developed hydrologic procedures for design flow estimation. Sherman had recently published his unit hydrograph theory in 1932, and later in 1938 Snyder, who had been charged by the Water Resource Council to develop a synthetic unit hydrograph, published his famous paper. The SCS unit hydrograph theory was developed by Victor Mockus in the late 1950s. Most if not all of the theories at that time reported the rainfall‐runoff process for floods as a surface phenomenon, and as such those theories all required some type of a timing parameter to estimate watershed response time. This article documents the development of the SCS lag equation.     

Estimating Evapotranspiration and Seepage for a Sinkhole Wetland From Diurnal Surface‐Water Cycles1

Abstract: This study used measured diurnal surface‐water cycles to estimate daily evapotranspiration (ET) and seepage for a seasonally flooded sinkhole wetland. Diurnal surface‐water cycles were classified into five categories based on the relationship between the surface‐water body and the surrounding ground‐water system (i.e., recharge/discharge). Only one class of diurnal cycles was found to be suitable for application of this method. This subset of diurnal cycles was used to estimate ET and seepage and the relative importance of each transfer process to the overall water budget. The method has limited utility for wetlands with erratic hydrologic regimes (e.g., wetlands in urban environments). This is due to violation of the critical assumption that the inflow/outflow rate remains constant throughout the day. For application to surface‐water systems, the method is typically applied with an assumed specific yield of 1.0. This assumption was found to be invalid for application to surface‐water systems with a noncylindrical pond geometry. An overestimation of ET by as much as 60% was found to occur under conditions of low pond stage and high water loss. The results demonstrate the high ET rates that can occur in isolated wetlands due to contrasting roughness and moisture conditions (oasis and clothesline effects). Estimated ET rates ranged from 4.1 to 18.7 mm/day during the growing season. Despite these large ET rates, seepage (recharge) was found to be the dominant water loss mechanism for the wetland.     

地下水开采引起的地表变形调查方法

过量的地下水开采可以诱发地面沉陷、建筑物开裂破坏等城市地质灾害和工程地质环境问题。通过对某工厂地表变形特征和分布规律的调查分析，论证了地下水开采与地表变形的关系，指出其某个水井抽水是引起厂区及附近地表变形的主要诱因，且水井距离地下水径流带越近，地表变形就越严重。实践证明，通过水文地质与工程地质调查和抽水试验，可以推断抽水与地面沉陷的水力联系，利用天然电场选频法、联合剖面法、高密度电法和探地雷达等物探方法能够从空间上判断地表及建筑物变形的动力源；动、静态应变的实时观测和分析可以从时间上证实抽水与地面变形的因果关系。     

大同市地表水“十五”与“九五”期间污染状况比较及原因分析

“十五”期间大同市地表水氨氮、总汞、六价铬、砷等项目比“九五”期间有所恶化，而生化需氧量、化学需氧量、镉等项目有所好转，其它项目变化不大。主要原因是随着经济的发展，排污企业日益增多，因此需要各排污单位增强环保意识，严格管理污水处理设施，杜绝偷排和超标排放现象，加快城市污水处理厂建设步伐。     

矿井用箱体防爆面加工安全技术研究

箱体零件是矿井机械中重要的基础零件。它的加工质量直接关系矿井设备的寿命、机器的性能和安全性。针对煤矿井下煤尘和瓦斯存在的环境特性、煤矿井用箱体防爆面加工的特殊要求,采用控制理论的信息流图,对工艺过程中传统方块图进行简化,使繁杂的方块图解采用信息流图表示工艺过程的工序(变量)之间关系。进而讨论箱体零件加工工艺过程误差转换模型、形状精度特征、传递图、描述方程、误差转换结构图;提出防爆面磨削工艺系统的数学模型;求解出振动特性、幅值和相位,得出了形状误差与工艺参数的关系曲线。实践证明,合理选择磨削参数,能够保证煤矿井下工作机械具有高的防爆性能,达到矿井安全生产的技术要求。     

围岩散热计算及壁面水分蒸发的处理

笔者采用湿度系数法对壁面水分蒸发进行了处理,对计算壁面处饱和空气含湿量的方法进行了改进,将饱和空气含湿量与温度的关系拟合为二次曲线;建立了在考虑壁面水分蒸发情况下解算巷道围岩温度场分布及围岩向风流的散热量的数学方程,并采用异步长有限差分法对其进行了数值模拟求解;解算出巷道壁面水分蒸发情况下围岩温度分布、壁面温度和围岩散热量的变化规律;并与将饱和空气含湿量与温度的关系拟合为线型关系曲线时的解算结果进行了对比,将饱和空气含湿量和温度之间的关系拟合为线性的计算结果存在一定的误差,通风时间越长,湿度系数越大,风流相对湿度越小,拟合为线性时计算出来的壁面温度和围岩散热量的误差越大。     

土壤含水量和植被对浅层滑坡土体抗剪强度的影响

通过对裸地和桉树林地两种土壤在不同土壤含水量、不同深度的非饱和土的直剪试验,研究了植被类型和含水量对非饱和土抗剪强度的影响.结果表明,随着含水量的增加,非饱和土的粘聚力和内摩擦角均减小,粘聚力有较大变化而内摩擦角变化较小,植被具有提高非饱和土抗剪强度的作用.     

苏南地区新近沉积土的动剪切模量比与阻尼比--试验研究

苏南地区的场地土主要为漫滩相、湖沼相或冲湖相新近沉积软弱土，结构松散，沉积零乱，成分复杂，饱水可液化粉细砂层及粉土层较为发育，在地震或动力荷载的作用下有可能发生软土震陷或砂土液化。通过对苏南地区淤泥质粉质粘土、粘土、粉质粘土、粉质粘土与粉细砂互层土、粉土、粉砂、细砂和中粗砂等8类新近沉积土155个原状土样历时4年的试验研究，给出了该地区上述8类新近沉积土的动剪切模量比G／Gmax和阻尼比D随剪应变幅值γ变化的平均拟合曲线及其参数的推荐值。为便于一般工程应用，给出了这8类新近沉积土的G/Gmax-γ，和D—γ关系曲线的推荐值及其标准差。     

ESTIMATING TMDL BACKGROUND SUSPENDED SEDIMENT LOADING TO GREAT LAKES TRIBUTARIES FROM EXISTING DATA1

ABSTRACT: The total maximum daily load (TMDL) for suspended sediment is the maximum quantity of suspended sediment that can enter a waterway without affecting the beneficial uses of the waterway. It is calculated as the sum of permissible allotments of point sources of suspended sediment, permissible allotments of nonpoint sources of suspended sediment, background (natural) loading of suspended sediment, and a margin of safety. The goal of this project was to develop methods for estimating background levels of sediment loads in tributaries of the Great Lakes. Such quantification is key to determining permissible TMDL in waters that do not meet water quality standards under the Clean Water Act of 1972. Suspended sediment loading for 46 rivers was estimated from data collected at U.S. Geological Survey (USGS) gages. Land use and physiographic attributes were estimated for these gaged basins with a geographic information system (GIS). Basin attributes and sediment yield data are the basis for examining two approaches to estimating background suspended sediment loads. One method, based upon envelope curves of sediment yield and drainage area, will be shown to have considerable merit. A second method, based upon correlation of sediment yield to various basin attributes such as drainage area and land use, will be shown to be fraught with difficulties.