石墨炉原子吸收光谱法测定海河下游水中痕量镉

原子吸收光谱法直接测定高盐水中痕量镉时，有很大背景吸收和误差。本文采用络合—萃取技术使共存元素与待测元素分离，既消除了基体干扰，又达到了富集作用，使测定结果准确可靠。     

高灵敏XRF测定废水中痕量砷

本文提出了在硫酸介质中，以锌粒还原产生氢化物，溴化铜溶液吸收，微孔滤膜过滤制成薄样，Ｘ射线荧光测定水中痕量砷的分析方法。     

监测分析中结果的表达─兼谈环境监测标准化

对环境监测中的数据、统计、有效数字、修约，以及计量单位、结果表达、原始数据的记录等既平常又十分重要易被忽略的重要问题作了概述，这些问题的解决才能保证监测结果的准确性和可靠性．     

WK－1A型二氧化硫自动测定仪测定烟气中SO_2的方法研究

本文研究了仪器电导法测定烟气中ＳＯ２的监测方法，并与碘量法进行了比较，提出了吸收液测定的影响及吸收液的配制方法。本方法简单快速，能够满足烟气中ＳＯ２监测工作的要求。     

在线自动监测仪与实验室国标方法测定地表水中总氮的比对分析

随着监测技术的发展,地表水中越来越多的污染物可采用自动监测仪器实现实时监测。采用自动监测与实验室国标方法测定地表水中总氮的结果是否可比以及造成差异的原因,文章根据实际样品比对实验对此进行了探讨。     

安徽省淮河流域水污染分析与环境目标可达性探讨

介绍了安徽省淮河流域水污染的历史与现状,分析了淮河流域水污染的特点,对实现《淮河流域水污染防治“十五”计划》的可能性进行了探讨。     

济南市创建国家环保模范城市的调查与思考

从济南市环境保护现状调查入手,对照国家环境保护模范城市考核指标,分析济南市创建国家环境保护模范城市存在的问题,借鉴其他城市创建国家环境保护模范城市的成功经验,结合济南市实际,提出了有针对性的对策与建议。     

海河下游水体中DO与NH_3-N、COD_(Mn)相关关系探讨

本文应用近年来海河下游监测数据对ＤＯ与ＮＨ３Ｎ和ＣＯＤＭｎ进行一元线性回归，得到两回归方程：ＮＨ３Ｎ＝－１２８ＤＯ＋１０５４；ＣＯＤＭｎ＝－１１３ＤＯ＋１６９２。并经相关系数和回归系数显著性检验，表明在９９９％的置信水平下ＤＯ与ＮＨ３Ｎ和ＣＯＤＭｎ线性相关均极其显著     

南昌市一次降水自动监测结果的综合分析

利用降水自动监测仪和空气自动监测系统的同步监测结果,分析了一次34 5mm连续降水中全过程的pH、EC和同期SO2、PM10、NO2的变化情况。降水中pH值为7 23～4 08、EC为488 8～7 6μS cm,pH、EC在降水初期变化较大。pH与EC、SO2呈现负相关趋势,降水过程中PM10、NO2基本保持较低水平,SO2变化较大。     

Desert Water Harvesting to Benefit Wildlife: A Simple, Cheap, And Durable Sub-Surface Water Harvester for Remote Locations

A sub-surface desert water harvester was constructed in the sagebrush steppe habitat of south-central Idaho, U.S.A. The desert water harvester utilizes a buried micro-catchment and three buried storage tanks to augment water for wildlife during the dry season. In this region, mean annual precipitation (MAP) ranges between about 150–250 mm (6″–10″), 70% of which falls during the cold season, November to May. Mid-summer through early autumn, June through October, is the dry portion of the year. During this period, the sub-surface water harvester provides supplemental water for wildlife for 30–90 days, depending upon the precipitation that year. The desert water harvester is constructed with commonly available, “over the counter” materials. The micro-catchment is made of a square-shaped, 20 mL. “PERMALON” polyethylene pond liner (approximately 22.9 m × 22.9 m = 523 m²) buried at a depth of about 60 cm. A PVC pipe connects the harvester with two storage tanks and a drinking trough. The total capacity of the water harvester is about 4777 L (1262 U.S. gallons) which includes three underground storage tanks, a trough and pipes. The drinking trough is refined with an access ramp for birds and small animals. The technology is simple, cheap, and durable and can be adapted to other uses, e.g. drip irrigation, short-term water for small livestock, poultry farming etc. The desert water harvester can be used to concentrate and collect water from precipitation and run-off in semi-arid and arid regions. Water harvested in such a relatively small area will not impact the ground water table but it should help to grow small areas of crops or vegetables to aid villagers in self-sufficiency.