Ergonomic Diagnosis of the Driver’s Workplace in an Electric Locomotive

This paper deals with research aimed at developing a method for ergonomic analysis of the driver’s workplace in an electric locomotive. It presents the structure of the diagnosis and its assumptions, and includes a re-evaluation of the questionnaire-expert method in ergonomic research. The article presents research data on weights and evaluations including their standard deviations for particular priority features. Ergonomic levels of the studied operator’s cabin in locomotives are compared.     

Quantitative assessment in safety reports of the consequences from the detonation of solid explosives

Safety reports are mandatory documents in member states of European Union whenever any threshold limits of amounts of either stored or processed hazardous substances are exceeded. After a short introduction to EU Seveso Directives on major-accident hazards involving dangerous substances and to the transposition and implementation by member states, with a brief comment on last 2012/18/EU Directive (also known as Seveso III directive), the paper focuses on drafting of safety reports for industrial activities involving solid explosives. Specifically, the quantitative assessment of consequences from detonation is tackled respect to the side-on overpressure and the debris production. Both direct and inverse problems are illustrated to determine respectively the overpressure value at a given distance, and the explosive amount that allows respecting the regulations. Their solution is based on either analytic or numerical techniques and being based on recent scientific publications on the matter either evaluates or zeroes nonlinear algebraic equations. The availability of these equations avoids grounding the consequences assessment on diagrams and nomograms that otherwise would lead to interpretation and usage errors besides avoiding the automatic solution of the inverse problem. The paper focuses also on details such as embankment, crater, munitions, rocket propellant, building structure, and wall material that, at different levels, play a role in the assessment of detonation consequences. A discussion on debris formation, the available literature, and the evaluation of the impact probability of fragments on both fixed and moving targets closes the paper.     

采空区气体分布规律及自然发火危险区域判定

〗采空区自然发火的防治是自燃矿井灾害防治的重中之重,选用薛村矿92118轻放工作面采空区为研究对象,现场布置测点,选取合适的采样仪器,对N2、O2、CO、CO2、CH4、C2H4、C2H6、C2H2气体进行实地采样分析,得出相应气体分布规律。并用流场模拟FEMLAB软件对其进行自然发火机理模拟,分析采空区漏风渗流速度场、流线、风速场和风压场情况,最后得出采空区自燃氧化危险区域和最易自然发火危险区域,结论合理。这对采空区采用注氮、堵漏风等措施提供了主要技术依据。     

U型工作面上隅角埋管瓦斯抽采数值模拟研究

传统的U型通风工作面上隅角瓦斯积聚现象经常出现,严重制约着矿井正常生产能力的有效发挥,对矿井安全生产造成重大威胁。基于前人对采空区非均质多孔介质气体运移理论的研究,采用Fluent软件数值模拟研究了U型和上隅角埋管条件下U型通风系统的静压力场和瓦斯浓度场。研究结果表明：在相同的模型参数条件下,U型通风容易造成上隅角瓦斯积聚,上隅角瓦斯超限问题十分严重;采空区5m处埋管,治理上隅角瓦斯积聚的效果欠佳,达不到安全开采的条件;15m处埋管可以较好的解决上隅角瓦斯超限问题,工作面没有出现瓦斯积聚现象,工作面和回风巷的瓦斯浓度始终处于1％以下;25m处埋管的效果与15m基本相同,没有表现出更好的瓦斯治理效果。综合数值模拟的结果,确定了上隅角埋管抽放采空区瓦斯的理想抽放位置为距离地板垂高1．2m、沿走向深入采空区15m处。     

矿井井筒提升设备绕流的数值模拟

基于经典的流体力学理论,建立罐笼绕流的二维RNGκ-ε湍流模型,分析其初始边界条件,并结合工程实际应用FLUENT计算流体动力学软件模拟罐笼运行时井筒内流场及压力场,得出井筒内流场及压力场的变化规律。研究结果表明:在罐笼运行期间,由于空间受限而引发活塞效应,井筒内压力发生瞬态变化,造成通风系统的压力波动,导致气流运动的动态改变,对通风系统稳定性有一定的影响。     

地铁车站突发客流疏运能力的理论计算与分析

针对车站OB应对亚运会期间大规模突发客流疏导问题,利用理论分析的方法计算不同车站设计方案,包括车站一岛一侧站台设计和一岛站台设计及不同通道设计时的最大疏运能力。计算考虑了车站建筑结构、出入口、闸机口和边门、楼扶梯等通道的数量及通过能力、站台面的容纳能力、列车的装载量、售检票方式、行车交路组织等诸多因素。通过对影响客流疏导的主要控制因素进行能力核算,分别得到了两种站台形式设计方案时的最大疏运能力的理论值。研究结论将有利于解决该车站应对亚运会期间大规模突发客流疏导问题,同时理论分析方法可为其他类似的车站能力设计提供参考。     

炮采放顶煤采空区自然发火的数值模拟应用

针对炮采放顶煤开采采空区容易发生自燃问题，基于漏风渗流方程、气体渗流一扩散-氧消耗方程，建立了采空区自然发火非稳定数值模型，采空区按非均质考虑，耗氧汇按煤矸氧化和瓦斯涌出稀释两方面综合考虑，用有限元数值方法联立求解模型。结合羊草沟矿实例，通过该矿自然发火后来的测试区的现场实测结果，拟合反演得到采空区煤的耗氧速度、瓦斯涌出强度和渗透特征参数，用确定的模型分析了前段出现自然发火的原因；描绘了炮采放顶煤开采时采空区冷却带、自燃带和窒息带等三带的形状，指出冒落压实的不均衡的非均质采空区，自燃点在偏人风一侧。用三带划分理论讨论了工作面参数（风量、推进度、控顶距）同自燃的量化关系，提出了从根本上预防采空区自然发火的途径与方法。     

抽出式通风煤巷掘进过程中粉尘浓度分布规律的数值模拟

根据气固两相流理论，针对矿井掘进工作面的特点，采用计算流体力学的离散相模型（DPM）对掘进工作面通风过程中粉尘浓度进行数值模拟，总结抽出式通风掘进巷道中粉尘浓度的沿程分布及变化规律。     

特种胶塑复合管抗张强度计算

通过对特种胶塑复合管的抗张强度计算和生产实践，证明了矿用充填管路采用胶塑复合管是可行的。为矿用充填管以胶塑复合管替代铁管提供了依据。     

影响脱硫塔性能的因素分析与研究

湿法烟气脱硫是成熟且具有较好发展前景的工艺,其中关键是对脱硫塔的选择及通过各项参数的控制达到良好的脱硫效率.通过对脱硫塔酸碱度(PH)、气液比(L/G)、流场特性、结垢等各种性能进行分析研究,对脱硫塔的选择和实际运行具有一定的指导意义.