不同重金属在烤烟中的累积分配特征研究

研究了重金属Hg、As、Pb在烤烟中的累积分布。结果表明：烤烟对Hg、As、Pb的耐受力较强；Hg抑制K326根系的生长，Pb、As对K326的生长有一定的促进作用。随着重金属浓度的增加，各部位重金属含量和烟株累积总量多呈增加趋势。在不同的处理下，3种重金属的含量在根系中最高；在相同的处理下，重金属在烟叶各部位的含量按大小顺序均为下部叶〉中部叶〉上部叶。随着处理浓度的增加，分配在根系中的重金属元素的比例不断增加，而在叶片中的分配比例不断降低；按重金属元素在叶片中的分配比例排序为Hg〉As〉Pb。     

烟草花叶病毒siRNA设计及其植物表达载体构建

RNA干扰技术已广泛应用于沉默基因表达的研究.本文分析烟草花叶病毒(TMV)基因序列,选择设计编码小分子发卡结构RNA(hpRNA)的cDNA;并根据农杆菌双元载体质粒p2355多克隆位点区限制性酶切位点,两端分别加入XbaI和BamHI酶切位点;分别合成单链DNA复性后插入到p2355上,经PCR、测序验证,表明已成功构建了具有潜在表达烟草花叶病毒siRNA的植物表达载体.图3表1参26     

Monitoring and biomonitoring of surface ozone in Florence, Italy

An ambient air study was conducted inthe city of Florence, Italy, in the summer 1996.Tropospheric ozone was continuously monitored withautomatic analyzers in three stations, two located inthe urban area and one in the hilly surroundings(Settignano). A biomonitoring campaign based on thetobacco cv. Bel-W3 plants was performed in the samearea. The highest values were constantly recorded inthe Settignano station. The highest 1-hour meanrecorded was 197 nl/l; the accumulated exposure overa threshold of 40 nl/l (AOT40) was well above thecritical levels standards for protection of thevegetation. A consistent temporal variation wasobserved and July proved to be the month with thehighest ozone levels. Cumulative frequencydistribution of ozone maximum daily concentrationsexhibited a good fitting to log-normality. No`week-end effect was observed. Biomonitoring datawere in good agreement with chemico-physical ones.     

磷和硅对土壤-烟草系统中铅迁移的影响

为探究降低土壤铅活性与烟叶铅含量的有效措施,采用盆栽法研究施磷、施硅及磷硅配施对铅在土壤-烟草系统中迁移的影响。结果表明,在非根际土壤中,施磷使土壤可交换态和碳酸盐结合态铅向铁锰氧化物结合态和残渣态铅转化,施硅使土壤可交换态铅向铁锰氧化物结合态铅转化,磷硅配施使土壤可交换态铅向铁锰氧化物结合态、有机态及残渣态铅转化。与CK相比,施磷、施硅及磷硅配施使根际土壤可交换态铅含量分别降低46.05%、14.24%和48.76%,使烟草铅总吸收量分别降低44.02%、44.04%和65.65%,使烟叶铅含量分别降低63.06%、60.37%和83.24%。施磷可通过降低土壤中铅向根部迁移的移动指数(IM,土-根)和根部向茎部迁移的移动指数(IM,根-茎)来抑制土壤中铅向叶部的迁移;施硅及磷硅配施可通过降低IM,土-根、IM,根-茎和茎部铅向叶部迁移的移动指数(IM,茎-叶)来抑制土壤中铅向叶部的迁移。施磷和施硅是降低烟叶铅含量的有效措施,且配施效果更佳。     

Dissipation and translocation of saisenxin in tobacco and soil under conventional field and controlled laboratory conditions

Abstract

The aim of this investigation was to investigate the fate and translocation characteristics of saisenxin (SSX), a novel organic zinc fungicide, in the environment and tobacco plants under conventional field and laboratory conditions. A rapid and sensitive analytical technique based on high-performance liquid chromatography was used for determination of SSX, in soil samples and tobacco leaf, stem and root samples. The method had satisfactiry linearity (R^2?=?0.9999) and the limits of detection and of quantitation of the target compound were 0.06 and 0.20?mg kg^?1, respectively. The average recoveries were in the range of 89.74–94.24% in soil, leaf, stem and root samples, with relative standard deviations of <8%. For conventional field trials, the half-life (t_1/2) of SSX was 5.9–6.5 days in soil and 4.8–5.3 days in tobacco leaves; the corresponding values under controlled laboratory conditions were extended to 7.1 and 7.6?days. The translocation factor (TF) values were in the range of 0–2.25 and 0–0.25 for foliage and root irrigation treatments, respectively. The TFs of SSX in tobacco indicated that tobacco had a high ability to transfer SSX upward.     

Respiratory Problems of Workers in the Zarda Industry in Kolkata,India

This study was undertaken to assess the pulmonary and respiratory problems of workers in a zarda factory. A total of 70 permanent zarda workers (50 manufacturing workers and 20 office ones) were studied in a factory in Baguihati, Kolkata, India. The study included (a) completion of a questionnaire (on pulmonary and respiratory problems), (b) measurement of physical parameters, (c) spirometry and (d) measurement of peak expiratory flow rate. At the same time, the worksite was analyzed with an OSHA-recommended ergonomics checklist. Many zarda manufacturing workers complained of respiratory symptoms. Continuous exposure to the tobacco processing environment reduced the workers’ lung volume and peak expiratory flow rates. Our study indicates that zarda manufacturing workers may have respiratory and pulmonary disorders related to exposure to tobacco dust in their work environment.     

造纸法再造烟叶废水COD的快速预测

针对造纸法再造烟叶生产废水COD波动大、废水处理系统运行不稳定等问题,对造纸法再造烟叶的生产废水排放及不同种类废水的水质特点进行了分析。在废水处理系统运行检测数据的基础上,采用数理统计方法研究了废水COD与pH的关系。结果表明:COD与pH呈高度显著的线性关系;用得到的回归方程COD=-2 913pH+22 059对废水COD进行验证和预测,相对偏差在15%以内。本研究为造纸法再造烟叶废水处理系统的运行提供了一种快捷的COD预测方法,有助于提高废水处理系统的处理效率和运行稳定性。     

烟草凋萎叶早期腐解液对莴苣的化感作用

为了研究烟草凋萎叶早期腐解液及其不同组分的化感作用,以对化感物质具有高敏感性的莴苣(Lactuca sativa)为指示材料,对烟草品种K326凋萎叶早期腐解液及其分离后的各组分分别进行了化感潜力的生物测定.结果表明:1)早期腐解液及其组分随处理浓度的增大对莴苣种子萌发的抑制效应逐渐增强,且显著降低了种子萌发速率,并延...     

香烟烟雾中SO2、NOx和甲醛浓度的测定及评价

选择某品牌香烟3种产品,分别测定香烟主流烟雾中SO2、Nox和甲醛的含量.3种污染物分别采用盐酸副玫瑰苯胺比色法、盐酸萘乙二胺比色法和乙酰丙酮光度法测定.结果表明,3种香烟主流烟雾的SO2质量浓度分别为15.76mg/m3、19.21mg/m3、20.22mg/m3;Nox的质量浓度分别为2.02mg/m3、1.60mg/m3、1.70mg/m3;甲醛的质量浓度分别为4.28mg/m3、4.68mg/m3、5.68mg/m3.香烟烟雾中SO2、Nox和甲醛的浓度较高,远高于这些有害物质引起机体损伤的阈浓度,长期接触会对机体产生确定性损伤效应.     

微波辐射烟杆氯化锌法制造活性炭工艺

提出了利用烟杆废料制造活性炭的新工艺.采用正交试验法对影响活性炭性能的因素,如微波辐射的功率、辐射时间、氯化锌浓度等进行了系统研究,得到了最佳工艺条件:微波辐射功率750 W,辐射时间7 min,氯化锌浓度为50%,利用该工艺条件所制备活性炭的产率为34.7%,亚甲蓝脱色力为17 mL/0.1 g,碘吸附值为1 093.4 mg/g.对比该活性炭与市售一级活性炭的微观结构,发现其具有更发达的微观孔隙结构.同传统方法相比,微波辐射法缩短了工艺时间,提高了产品性能.