环境约束下长江经济带全要素能源效率的时空分异研究——基于超效率DEA模型和ML指数法

基于超效率DEA模型和ML指数法,考察长江经济带1999~2013年全要素能源效率。实证研究结果显示:研究期内,环境约束下的长江经济带全要素能源效率年均下降2.9%,而不考虑环境因素的全要素能源效率年均下降幅度仅为0.4%,污染是导致能源效率损失的重要因素;长江经济带整体层面全要素能源效率的发展演变基本呈"双峰一谷"的"M"形分布,表现为两个"上升—下降"周期,而省际和上中下游全要素能源效率的演变特征迥异;从空间差异看,省际全要素能源效率差异远远大于上中下游差异,但近年来这种差异均有不同程度的缩小。未来长江经济带发展必须践行生态文明发展战略,保证发展的可持续性,同时加强能源、环保等领域的合作,促进长江经济带全要素能源效率发展的协同进步。     

磁絮凝法处理DZA有机废水的研究

本文介绍了磁絮新颖产分离技术，应用该技术能有效处理水中ＤＺＡ有机物，实现数秒内的快速分离污泥，污泥含水率低。     

An Experimental Study on the Treating River Sewage with New Bioreactor

A new bioreactor on the basis of a dynamic fluidized bed was designed, which combines advantages of the fluidized bed and a biological contactor. The experiments of start up, normal operation and parameter adjustment are carried out. The results show that the bioreactor can be quickly started up in the condition that the fill is 50%, the hydraulic retention time is 72 min, aerate speed is 2.5 m3/h, rotation-cage rotated speed is 1.5 r/min, and the removal rates of chemical oxygen demand （CODcr） and Ammonia nitrogen （NH3-N） are 75.34% and 80.98% respectively. The influence of the operation parameter on removal rates of the bioreactor is analyzed, and an appropriate operation parameter is provided.     

利用卫星资料估算我国西北地区直接辐射

在缺乏直接辐射、云量、日照时数等地面观测资料情况下,如何正确估算太阳直接辐射对太阳能合理开发利用有重要意义。利用NCEP/NCAR再分析资料、EOS-AURA卫星和FY-2C气象卫星反演资料,采用一个改进的宽带辐射传输模型对我国西北5个地面辐射站点2006年和2007年直射日曝辐量进行了估算。模型首先在Bird模型基础上对晴空条件下的太阳直接辐射进行了计算,然后结合FY-2C气象卫星总云量和云类反演数据,引入了一个线性方程,对实际天气状况下的直射日曝辐量进行了计算。结果表明:5个站点模拟的直射日曝辐量与实测值均存在较好一致性,评价效率系数NSE介于0.68~0.8,而对月均直射日曝辐量的模拟结果则显示模型在4-10月的估算精度要高于11-3月结果。     

Measurement of air exchange rates in different indoor environments using continuous CO2 sensors

A new air exchange rate (AER) monitoring method using continuous CO₂ sensors was developed and validated through both laboratory experiments and field studies. Controlled laboratory simulation tests were conducted in a 1-m³ environmental chamber at different AERs (0.1-10.0 hr^-1). AERs were determined using the decay method based on box model assumptions. Field tests were conducted in classrooms, dormitories, meeting rooms and apartments during 2-5 weekdays using CO₂ sensors coupled with data loggers. Indoor temperature, relative humidity (RH), and CO₂ concentrations were continuously monitored while outdoor parameters combined with on-site climate conditions were recorded. Statistical results indicated that good laboratory performance was achieved: duplicate precision was within 10%, and the measured AERs were 90%-120% of the real AERs. Average AERs were 1.22, 1.37, 1.10, 1.91 and 0.73 hr^-1 in dormitories, air-conditioned classrooms, classrooms with an air circulation cooling system, reading rooms, and meeting rooms, respectively. In an elderly particulate matter exposure study, all the homes had AER values ranging from 0.29 to 3.46 hr??1 in fall, and 0.12 to 1.39 hr^-1 in winter with a median AER of 1.15.     

An air quality forecasting system in Beijing - Application to the study of dust storm events in China in May 2008

An air pollution forecast system, ARIA Regional, was implemented in 2007-2008 at the Beijing Municipality Environmental Monitoring Center, providing daily forecast of main pollutant concentrations. The chemistry-transport model CHIMERE was coupled with the dust emission model MB95 for restituting dust storm events in springtime so as to improve forecast results. Dust storm events were sporadic but could be extremely intense and then control air quality indexes close to the source areas but also far in the Beijing area. A dust episode having occurred at the end of May 2008 was analyzed in this article, and its impact of particulate matter on the Chinese air pollution index (API) was evaluated. Following our estimation, about 23 Tg of dust were emitted from source areas in Mongolia and in the Inner Mongolia of China, transporting towards southeast. This episode of dust storm influenced a large part of North China and East China, and also South Korea. The model result was then evaluated using satellite observations and in situ data. The simulated daily concentrations of total suspended particulate at 6:00 UTC had a similar spatial pattern with respect to OMI satellite aerosol index. Temporal evolution of dust plume was evaluated by comparing dust aerosol optical depth (AOD) calculated from the simulations with AOD derived from MODIS satellite products. Finally, the comparison of reported Chinese API in Beijing with API calculated from the simulation including dust emissions had showed the significant improvement of the model results taking into account mineral dust correctly.     

Sewage sludge disintegration by high-pressure homogenization: A sludge disintegration model

High-pressure homogenization (HPH) technology was applied as a pretreatment to disintegrate sewage sludge. The effects of homogenization pressure, homogenization cycle number, and total solid content on sludge disintegration were investigated. The sludge disintegration degree (DDCOD), protein concentration, and polysaccharide concentration increased with the increase of homogenization pressure and homogenization cycle number, and decreased with the increase of sludge total solid (TS) content. The maximum DDCOD of 43.94% was achieved at 80 MPa with four homogenization cycles for a 9.58 g/L TS sludge sample. A HPH sludge disintegration model of DD_COD= kN^aP^b was established by multivariable linear regression to quantify the effects of homogenization parameters. The homogenization cycle exponent a and homogenization pressure exponent b were 0.4763 and 0.7324 respectively, showing that the effect of homogenization pressure (P) was more significant than that of homogenization cycle number (N). The value of the rate constant k decreased with the increase of sludge total solid content. The specific energy consumption increased with the increment of sludge disintegration efficiency. Lower specific energy consumption was required for higher total solid content sludge.     

Three-dimensional hydrodynamic and water quality model for TMDL development of Lake Fuxian, China

Lake Fuxian is the largest deep freshwater lake in China. Although its average water quality meets Class I of the China National Water Quality Standard (CNWQS), i.e., GB3838-2002, monitoring data indicate that the water quality approaches the Class II threshold in some areas. Thus it is urgent to reduce the watershed load through the total maximum daily load (TMDL) program. A three-dimensional hydrodynamic and water quality model was developed for Lake Fuxian, simulating flow circulation and pollutant fate and transport. The model development process consists of several steps, including grid generation, initial and boundary condition configurations, and model calibration processes. The model accurately reproduced the observed water surface elevation, spatiotemporal variations in temperature, and total nitrogen (TN), total phosphorus (TP), and chemical oxygen demand (COD) concentrations, suggesting a reasonable numerical representation of the prototype system for further TMDL analyses. The TMDL was calculated using two interpretations of the water quality standards for Class I of the CNWQS based on the maximum instantaneous surface and annual average surface water concentrations. Analysis of the first scenario indicated that the TN, TP and COD loads should be reduced by 66%, 68% and 57%, respectively. Water quality was the highest priority; however, local economic development and cost feasibility for load reduction can pose significant issues. In the second interpretation, the model results showed that, under the existing conditions, the average water quality meets the Class I standard and therefore load reduction is unnecessary. Future studies are needed to conduct risk and cost assessments for realistic decision-making.     

Surface clogging process modeling of suspended solids during urban stormwater aquifer recharge

Aquifer recharge,which uses urban stormwater,is an effective technique to control the negative effects of groundwater overexploitation,while clogging problems in infiltration systems remain the key restricting factor in broadening its practice.Quantitative understanding of the clogging process is still very poor.A laboratory study was conducted to understand surface physical clogging processes,with the primary aim of developing a model for predicting suspended solid clogging processes before aquifer recharge projects start.The experiments investigated the clogging characteristics of different suspended solid sizes in recharge water by using a series of one-dimensional fine quartz sand columns.The results showed that the smaller the suspended particles in recharge water,the farther the distance of movement and the larger the scope of clogging in porous media.Clogging extents in fine sand were 1 cm,for suspended particle size ranging from 0.075 to 0.0385 mm,and 2 cm,for particles less than 0.0385 mm.In addition,clogging development occurred more rapidly for smaller suspended solid particles.It took 48,42,and 36 hr respectively,for large-,medium-,and small-sized particles to reach pre-determined clogging standards.An empirical formula and iteration model for the surface clogging evolution process were derived.The verification results obtained from stormwater recharge into fine sand demonstrated that the model could reflect the real laws of the surface clogging process.     

感潮河网溢油归宿的数值模拟研究

基于拉格朗日油粒子模型、溢油风化模型以及三维水动力、泥沙和吸附质模型构建了溢油双层数学模型.模型不仅能够模拟油膜的运动轨迹、岸边吸附与冲刷、油品性质变化过程,而且通过耦合泥沙吸附及沉积动力学过程,能够更加客观地模拟溢油从水体向底泥环境的迁移过程,更全面地反映溢油在环境中的归宿.此外,本文以假设溢油事故为背景,模拟和分析了洪、枯季节条件下珠江广州段溢油事故对河网陆地边界、河网水质及底泥环境的影响.