Small-scale physical explosions in shock tubes in comparison with condensed high explosive detonations

A series of small-scale experiments involving physical explosions in a 1.6 l pressure vessel was carried out. Explosions were initiated by spontaneous rupture of an aluminium membrane on one side of the vessel at a pressure in the range 1–1.2 MPa. The pressure waves released were measured at different distances along two separate shock tubes, one 10 m long and 200 mm in diameter (closed at one end by the high pressure vessel) and the other 15 m long and 100 mm in diameter.TNT equivalency was used for predicting the blast wave characteristics after vessel rupture. TNT equivalency was used because equations for prediction of peak pressure and impulse of the blast wave in 1-D geometry after detonations of condensed explosives are known. Some experiments with an equivalent amount of real explosive were carried out for comparison with the theoretical and experimental data obtained. The applicability of the TNT equivalency method presented for calculations of maximum pressure and shock wave impulse generated after rupture of the pressure vessel in 1-D geometry is discussed.     

Testing Sleeping Bags According to EN 13537:2002: Details That Make the Difference

The European Standard on sleeping bag requirements (EN 13537:2002) describes a procedure to determine environmental temperature limits for safe usage of sleeping bags regarding their thermal insulation. However, there are several possible sources of error related to this procedure. The main aim of this work was to determine the influence of the various measuring parameters on the acuity of the respective parameters in order to judge the requirements. The results indicated that air velocity, mattress insulation and time between unpacking the bag and measurement had a significant impact on the result, with a difference of up to 5–15% in thermal insulation between minimum and maximum allowable parameter levels. On the other hand, manikin weight, thickness of the artificial ground and presence of a face mask were found to have a negligible influence. The article also discusses more general aspects of the standard including the calculation methods used.     

发泡注浆法合成莫来石轻质耐火材料

以工业废弃物粉煤灰和当地粘土为主要原料,十二烷基苯磺酸钠为发泡剂,采用发泡注浆法制备轻质莫来石耐火材料,研究了烧结温度对耐火材料晶相的影响以及发泡剂的种类、添加量和浆料固含量对轻质耐火材料常温物理性能的影响。结果表明,适当的烧结温度可改善耐火材料的晶相,同时对制品的孔隙率也有一定影响。选择适宜的发泡剂及添加量,在一定的浆料固含量范围内,可以制备容重小,孔隙率高,导热系数小,机械强度适中的轻质耐火材料。     

城市内涝灾害应急救援指派模型

为实现应急救援队伍的合理派遣以快速营救受困人员,根据城市内涝灾害特点、城市内涝灾害情况和救援资源的分布,综合考虑应急救援队伍的救援效率、救援可靠性、救援时间等因素,构建多目标应急救援指派模型。运用模糊数学思想,将各目标下的属性值矩阵转化为模糊关系矩阵。针对优化模型的特点,采用反点法对模型进行求解。为证明反点算法的可行性,采用标准匈牙利算法对模型进行求解并加以验证。算例结果表明,多目标优化方案可以进行良好的任务分配,可满足应急救援任务的需要。     

基于完全因素分解法的能源效率影响因素研究

“十二五”是我国全面建成小康社会的关键阶段,又由于环境和资源禀赋方面的制约,提高能源效率成为我国经济和社会发展的内在需求.从能源强度的角度出发,分析了我国产业结构和能源效率现状,采用完全因素分解法,从产业结构的角度人手对全国能源效率的影响因素进行了研究.结果表明,技术因素是我国能源效率提高的主要推动力,第二产业对能源效率的影响远远大于第一和第三产业.     

复合法在露天矿边坡稳定性分析中的应用

边坡的稳定性问题关系到人们的生命安全,对其进行研究是非常有必要的。以白云鄂博铁矿的D区边坡稳定性分析为例,采用复合法进行研究,首先通过对其边坡进行现场节理的详细线测量绘制赤平投影图,来判断出可能发生破坏的位置;其次通过Sarma法进行平衡理论计算,稳定性系数结果为0．75;最后通过FLAC3D进行数值模拟计算,得出应力、应变云图,另对分析出可能破坏的两个位置进行剖面计算,计算后的稳定性系数结果分别为0．5、0．6。总之,边坡稳定性系数均小于1,可能发生失稳,需对其进行加固,保证矿山安全开采。     

基于熵值法的济南市可持续发展能力动态研究

为使济南市更加科学、协调、稳健地可持续发展,根据科学性、操作性、可比性、代表性等原则建立济南市可持续发展指标体系,并在此基础上,利用熵值法对济南市“十一五”期间可持续发展综合能力进行了定量评估;从系统的角度出发,对济南市社会、经济、环境各子系统在可持续发展中的作用、影响以及各子系统间的协调状态进行了分析并针对性地提出了济南市可持续发展建议.文章对其他大中城市的社会、经济、环境可持续发展能力建设具有一定的参考价值.     

区域声环境质量污染水平预测方法评价与对比研究

为完成北京市“十二五”城市区域的主要声污染防治工作目标,全面提高北京市声环境质量水平,科学预测区域内在“十二五”期间噪声污染水平和发展趋势,本文以北京市某典型区域作为研究对象,在收集大量相关资料与实测历史噪声数据的基础上,运用指数平滑法与灰色模型GM（1,1）对所选定研究区域的噪声污染水平与发展趋势进行预测与分析。研究结果表明：运用指数平滑法与灰色模型对研究区域声环境噪声污染预测是可行的,北京市在“十二五”期间声环境质量水平符合《声环境质量标准》（GB3096—2008）中的一类区域标准。     

动态平衡法测试气候舱回收率的方法研究

气候舱法凭借可靠的环境模拟特性和非破坏性,是目前国际与国内广泛采用的实验室检测方法,常用于检测木制品家具、建筑材料和汽车中的有害物质。本研究测定挥发性有机化合物组分的气候舱法回收率,发现持续注射甲苯3h后浓度才达到动态平衡,3h后的平均回收率为87.7%,证明动态平衡法适用于测定气候舱回收率的测定,同时证明了气候舱法测定VOC组分能够符合标准的要求。     

An Optimization Method for Estimating Constituent Mean Concentrations in Base Flow‐Dominated Flow

Pollutant coefficients have been widely used to assess runoff nonpoint source pollution from individual land uses (e.g., agricultural, residential) of a watershed. Pollutant coefficients, known as event mean concentrations (EMCs), were developed by the U.S. Environmental Protection Agency's Nationwide Urban Runoff Program (NURP) to serve as a national measure for characterizing pollutant loading in a receiving water body. The term “baseflow pollutant coefficient (BPC)” is used in this study as a surrogate for EMC to describe mean concentration of pollutants in base flow‐dominated flow. A method for characterizing base flow quantity and quality for different land uses was explored using inverse modeling with two optimization techniques (a least square method and a genetic algorithm [GA] optimization), land use information, and streamflow quantity and quality data. The inverse model was formulated as a constrained minimization problem and demonstrated with data for 15 watersheds in Indiana. Results showed that estimated pollutant coefficients are comparable to the published literature. This indicates that the proposed method has the potential to effectively estimate constituent mean concentrations for pollutant load determination in gauged and ungauged watersheds, albeit more analysis with larger and more robust datasets is desirable to further refine and validate the accuracy of the approach.