成矿结构体系及其钨矿找矿意义

矿床共生组合和成矿系列是古老的或研究时间较长的概念,在不同矿床类型间的成因联系研究、指导成矿预测和找矿起了不小作用。为了更利于成矿预测和指导找矿,在不同矿床(点、体,种)类型的成因联系研究基础上,进行不同矿床(点、体,种)类型的空间分布规律或空间结构形式的研究,对钨矿新一轮找矿尤为重要。为此,本文首次提出成矿结构体系概念,并对其主要特征、类型、形成机制、钨矿成矿结构体系及其找矿意义进行探讨。     

山仔水库周边乡镇生态质量未确知测度评价

通过建立未确知模型,结合层次分析法确定权重,对福州由仔水库周边有人类聚居点的小沧乡、潘度乡、飞竹乡、霍口乡和日溪乡的生态环境质量做出了评价。得出了它们的生态环境质量均为四级,属较差水平。而在积分上,霍口乡的环境质量最好,潘度乡最差。     

The implementation of a measurement system for brushless DC motor parameters

Most of the energy conversion in industrial devices and equipment is completed by the motor. The acquirement of motor parameters becomes very important for designing the motor drives. The aim of this paper is to design and implement a motor measurement system. Through the processing of an Advanced RISC Machines (ARM) microcontroller, the various parameters of motors such as input voltage, input current, input power, motor speed, and motor torque can be obtained. Consequently, the torque constant, load torque, viscous friction, and the inertia of the motor are calculated and achieved. The motor parameters can be commanded and displayed in the designed human interface of a PC via USB communication. The hardware system designed in this system includes an ARM microcontroller, an inverter, a voltage sensor, a current sensor, a torque sensor, and power supply. The software programming is developed under the Visual Studio 2012 environment development platform using the C language. Finally, the prototype of the motor measurement system is completed and verified. The experimental results for the motor parameters and torque/speed characteristic are demonstrated and show the feasibility of the complete designed system.     

城市路面积尘微塑料污染特征

微塑料作为一种新兴污染物,由于其对生态系统具有潜在的负面影响,受到了广泛的关注.但是目前关于其在陆地环境中,尤其是路面积尘中的相关信息相对有限.本文对马鞍山市雨山区路面积尘的微塑料污染特征进行了研究.研究区域内单位面积路面所积累的微塑料丰度为(18.11±32.36)n·m-2,含量为(27.29±72.64)mg·m...     

用S型皮托管测固定污染源排气参数的方法探讨

针对固定污染源排气监测实际工作用S型皮托管测定静压方法有争议的问题进行了理论分析和低速风洞试验。结果表明,用S型皮托管测固定污染源排气静压的平行法和垂直法二方法都在不影响排气量和污染物排放量测定结果的范围内;用全压与平行法静压差作为动压来计算流速可影响较大。     

高桩码头的振动测量与分析

测量了高平潮、低平潮及两潮位之间三个时段某高桩码头工作平台的振动情况,比较了不同潮位下振动的最大位移值.对测量数据进行了分析,发现海浪对结构振动的位移大小影响明显,得到了工作平台的前三阶自振频率.利用两点差法,根据码头平动记录求取了码头沿垂直轴向的码头扭转分量,经计算码头转角在10-7rad量级,码头扭转的转动中心按照...     

长江三角洲创新发展空间溢出效应的测度与分解

一体化深化背景下,准确把握城市群创新互动关系,对于推动高质量发展具有重要现实意义。空间溢出是创新发展互动关系重要体现之一,基于城市尺度数据、空间计量方法,对长江三角洲创新发展空间溢出效应进行多角度研究。主要结论如下：（1）城市创新发展存在显著为正的空间溢出效应,创新人才、资金投入、经济发展、交通设施和对外开放等都是创新发展重要驱动因素,但不同因素空间溢出效应存在差异。（2）不同区域、不同时期对比发现,创新发展空间溢出效应存在显著差异,如区域对比核心区时间演变明显增强等。（3）空间溢出效应随距离增加呈现“倒U型”演变趋势,且这一效应在325 km处最大,而后空间溢出效应的缓慢波动下降与中心城市相对均衡分布有关。本文为识别城市创新发展互动关系提供了新视角,对推动城市群创新发展、一体化深化等具有现实指导意义。     

Distribution and transport characteristics of fine particulate matter in beijing with mobile lidar measurements from 2015 to 2018

Accurately quantifying the concentration and transport flux of atmospheric fine particulate matter(PM_2.5) is vital when attempting to thoroughly identify the pollution formation mechanism.In this study,the mobile lidar measurements in Beijing on heavily polluted days in December from 2015 to 2018 are presented.The lidar was mounted on a vehicle,which could perform measurements along designated routes.On the basis of mobile lidar measurements along closed circuits of the 6 th Ring Road...     

安徽霍邱李老庄铁矿-菱镁矿床地质特征及成因类型

霍邱铁矿田位于华北地台南缘,处于北淮阳山字型构造脊柱部位。李老庄铁矿—菱镁矿床置于霍邱铁矿田中部。该矿床主要产于上太古界霍邱群变质岩系中,矿体赋存于富镁碳酸盐中,矿石类型可以分为菱镁矿磁铁矿石和蛇纹石磁铁矿石,各占25%。成矿物质来源于这些变质岩系的多层、分散的含铁建造矿源层中。依据矿床地质特征,结合矿石同位素地质和测年结果,李老庄铁矿—菱镁矿铁矿床是晚太古代海相火山—沉积变质型矿床。     

Identification, analysis and dissemination of information on near misses: A case study in the construction industry

Near misses are well-known for providing a major source of useful information for safety management. They are more frequent events than accidents and their causes may potentially result in an accident under slightly different circumstances. Despite the importance of this type of feedback, there is little knowledge on the characteristics of near misses, and on the use of this information in safety management. This article proposes guidelines for identifying, analyzing and disseminating information on near misses in construction sites. In particular, it is proposed that near misses be analyzed based on four categories: (a) whether or not it was possible to track down the event; (b) the nature of each event, in terms of its physical features (e.g. falling objects); (c) whether they provided positive or negative feedback for the safety management system; and (d) risk, based on the probability and severity associated with each event. The guidelines were devised and tested while a safety management system was being developed in a healthcare building project. The monitoring of near misses was part of a safety performance measurement system. Among the main results, a dramatic increase in both the number and quality of reports stands out after the workforce was systematically encouraged to report. While in the first 4 months of the study – when the workforce was not encouraged to report – there were just 12 reports, during the subsequent 4 months – when the workforce was so encouraged – there were 110 reports, all of them being analyzed based on the four analytical categories proposed.