Concentrations of cadmium and lead heavy metals in Dardanelles seawater

Cadmium and lead were determined simultaneously in seawater by differential pulse stripping voltammetry (DPSV) preceded by adsoptive collection of complexes with 8-hydroxyquinoline (oxine) on to a hanging mercury drop electrode (HMDE). In preliminary experiments the optimal analytical condition for oxine concentration was found to be 2.10⁻⁵ M, at pH 7.7, the accumulation potential was −1.1 V, and the initial scannig potential was −0.8 V. The peak potentials were found −0.652 V for Cd and −0.463 V for Pb At the 60 s accumalation time. The limit of detection (LOD) and limit of quantitatification (LOQ) were found to be by voltammetry as 0.588 and 1.959 μg l⁻¹ (RSD, 5.50%) for Cd and 0.931 and 3.104 μg l⁻¹ (RSD, 4.10%) for Pb at 60 s stirred accumulation time respectively. In these conditions the most of the seawater samples are amenable for direct voltammetric determination of cadmium and lead using a HMDE. An adsorptive stripping mechanism of the electrode reaction was proposed. For the comparison, seawater samples were also analysed by ICP-atomic emission spectrometry method (ICP-AES). The applied voltammetric technique was validated and good recoveries were obtained.     

226Ra, 232Th and 40K analysis in soil samples from some areas of Malwa region, Punjab, India using gamma ray spectrometry

The activity concentrations of soil samples collected from thirty different locations of Malwa region of Punjab were determined by using HPGe detector based on high-resolution gamma spectrometry system. The range of activity concentrations of ²²⁶Ra, ²³²Th and ⁴⁰K in the soil from the studied areas varies from 18.37 Bq kg⁻¹ (Sangrur) to 53.11 Bq kg⁻¹ (Sitoguno), 57.28 Bq kg⁻¹ (Dhanola) to 148.28 Bq kg⁻¹ (Sitoguno) and 211.13 Bq kg⁻¹ (Sunam) to 413.27 Bq kg⁻¹ (Virk Khera) with overall mean values of 35 Bq kg⁻¹, 80 Bq kg⁻¹and 317 Bq kg⁻¹ respectively. The absorbed dose rate calculated from activity concentration of ²²⁶Ra, ²³²Th and ⁴⁰K ranges between 8.47 and 24.48, 35.68 and 92.38, and 8.74 and 17.11 nGy h⁻¹, respectively. The total absorbed dose in the study area ranges from 58.08 nGy h⁻¹ to 130.85 nGy h⁻¹ with an average value of 79.11 nGy h⁻¹. The calculated values of external hazard index (H_ex) for the soil samples of the study area range from 0.35 to 0.79. Since these values are lower than unity, therefore, according to the Radiation Protection 112 (European Commission. Radiation Protection 112 1999) report, soil from these regions is safe and can be used as a construction material without posing any significant radiological threat to population.     

Ambient Aerosol and its Carbon Content in Gainesville, a Mid-Scale City in Florida

Ambient aerosols were collected during 2000–2001 in Gainesville, Florida, using a micro-orifice uniform deposit impactor (MOUDI) to study mass size distribution and carbon composition. A bimodal mass distribution was found in every sample with major peaks for aerosols ranging from 0.32 to 0.56 μm, and 3.2 to 5.6 μm in diameter. The two distributions represent the fine mode (<2.5 μm) and the coarse mode (>2.5 μm) of particle size. Averaged over all sites and seasons, coarse particles consisted of 15% carbon while fine particles consisted of 22% carbon. Considerable variation was noted between winter and summer seasons. Smoke from fireplaces in winter appeared to be an important factor for the carbon, especially the elemental carbon contribution. In summer, organic carbon was more abundant. The maximum secondary organic carbon was also found in this season (7.0 μg m⁻³), and the concentration is between those observed in urban areas (15–20 μg m⁻³) and in rural areas (4–5 μg m⁻³). However, unlike in large cities where photochemical activity of anthropogenic emissions are determinants of carbon composition, biogenic sources were likely the key factor in Gainesville. Other critical factors that affect the distribution, shape and concentration were precipitation, brushfire and wind.     

Investigation of heavy metal contaminations in the lower Sakarya river water and sediments

In this work, water and sediment samples were collected from three different stations located along the Sakarya river between May and September 2003. Lead, copper, chromium, zinc, nickel and cadmium concentrations were determined by using solvent extraction and flame atomic absorption spectrometric method. The results show that differences based upon sampling times, regions, sediment and water samples were observed. The mean levels of copper, nickel, chromium, lead, cadmium, zinc for sediment samples are; 4.630 μg g⁻¹, 13.520 μg g⁻¹, 8.780 μg g⁻¹, 2.550 μg g⁻¹, 9.990 μg g⁻¹ and for water samples are; 0.851 μg g⁻¹, 1.050 μg g⁻¹, 0.027 μg g⁻¹, 1.786 μg g⁻¹, 0.236 μg g⁻¹, 0.173 μg g⁻¹, respectively.     

Soft intervention technology as a tool for integrated coastal zone management

After introducing soft defence techniques as an alternative to hard defence techniques, the need is emphasized to consider the coastal area as an integral system. By recalling the main driving factors for coastal management: conflict resolution, resilience and sustainability, we logically arrive at the concepts of ecological engineering and ecotechnology, which are increasingly acknowledged as possible solutions to achieve sustainable use of coastal space as a resource. In this context, we refer to the principles of self design and of ecosystem conservation. In order to deal with real situations we are in need of fundamental ‘tools’ for the application of the soft intervention technology approach. We therefore introduce the concept of physiographic units and develop an initial elaboration for a coastal stretch and for coastal wetlands. The latter deserve more attention because of the already established practices of ecotechnology, at least as far as water and soil quality are concerned, but certainly also concerning morphology, especially in the future. We conclude by briefly discussing how activities undertaken in two research projects currently being conducted under the framework of the Marine Science and Technology Program of the Commission of the European Communities are expected to contribute to the concepts introduced here.     

长江沉积物中痕量氯代酚类化合物的测定

本文利用同位素稀释质谱法对长江南京段沉积物中１８种氯代酚进行了分离鉴定,结果表明,沉积物中ＣＰｓ的含量以五氯苯酚为主,     

水环境中26种类固醇激素的分析方法研究

建立了固相萃取-超高效液相-串联质谱法同时测定水环境中26种类固醇激素的分析方法。明确了取样体积为500 m L,Cleanert PEP为富集柱,乙酸乙酯为洗脱剂,甲醇为溶剂进行提取操作。选择了正离子模式,以0. 1%甲酸/甲醇-水为流动相,负离子模式以0. 1%氨水/乙腈-水为流动相,试样经AcquityTMUPLC BEH C18色谱柱分离后,选用质谱检测模式进行定性、定量分析。通过方法验证,26种类固醇激素的方法检出限为0. 3～1. 5 ng/L,测定下限为1. 2～6. 0 ng/L,代表性样品测定结果的相对标准偏差为2. 6%～13. 7%(n=6),加标回收率为71. 2%～121%。该方法操作便捷,灵敏度高,精密度和准确度良好,可适用于水环境中多种痕量、超痕量类固醇激素的定性定量分析。     

车载环境γ能谱测量系统探测器设计及性能研究

车载环境γ能谱测量系统探测器是环境γ能谱测量技术领域研究热点.为提高探测效率,缩短测量时间,针对车载环境γ能谱测量系统设计了双Nal(T1)晶体探测器,并测试了探测器主要性能指标.研究表明,探测器能量分辨率为6.73％,计数稳定性优于4.2％,可识别238U、232Th、40K等核素,可清晰分辨152Eu各能量峰,温度...     

混合酸消解变化对土壤和沉积物中痕量硒分析影响

基于各3种采集环境样本、国家标准物质的土壤和沉积物,以当前环境监测行业常用的3种消解方法,探讨20种混合酸系统条件在消解条件变化中对复杂样本硒元素测定的影响.确定了最佳土壤和沉积物消解的组合为王水系统(盐酸∶硝酸∶氢氟酸∶过氧化氢∶高氯酸=3∶1∶1∶1∶1),各消解法的处理结果部分(n=5):水浴法消解时间仅需0.5...     

地表水中微量氯代芳烃和硝基取代芳烃化合物的分析方法

建立了固相萃取、毛细管气相色谱-电子捕获检测、内标标准曲线法定量分析地表水中十三种氯苯、硝基氯苯和硝基苯类化合物的方法.该法对这些化合物的平均回收率在62%-101%之间,变异系数在3%-27%之间,方法最小检测浓度在0.01-1.31μg·1-1之间.应用本方法对太湖水中的氯代芳烃和硝基取代芳烃化合物进行了三次采样分析,定量重现性较好.