Analysis of the recycling system for aluminum cans,focusing on collection,transportation, and the intermediate processing methods

In this article, the systems for the collection and intermediate processing of used beverage cans (UBCs) are compared and analyzed, focusing on the time taken and the cost of processing, the energy consumption, and the emissions of CO₂, SO _x , and NO _x , during the process. We found that cases where the UBCs were crushed in the discharging process gave better results, and how the UBCs were collected was the most important factor. It was more desirable to treat UBCs in one place than in two places. When the transportation distance was longer, the pressed form of UBCs was more convenient. When the transportation distance was short, the original form, the crushed form, and the shredded form of UBCs were all suitable. That is, the contribution of the transportation process to the evaluation was large when the transport distance was long, and the contribution of the treatment process was large when the transport distance was short.     

The Interior-to-Edge Breakpoint Distance as a Guideline for Nature Conservation Policy

A method is proposed to quantify disturbance impact on isolated habitats. For every landscape patch, the breakpoint distance, defined as the penetration distance for which equality of interior and edge habitat is observed, can be calculated. Disturbance with equal impact at all patch sides is assumed. Effects of patch compactness, size, convolution, and perforation are discussed. The potential use of the measure for nature reserve design is discussed. The breakpoint distance follows the reserve design guidelines for individual patches, based on island biogeography and is consistent with the form and function principle. A large breakpoint distance is preferred for natural habitats. Small size, small compactness, intense convolution, and the occurrence of many gaps depress the breakpoint distance.     

天然气钻井井口安全距离研究分析

分析天然气钻井井场可能发生的事故类型及事故的破坏程度,选择适合的事故后果模型,对天然气井井喷失控后可能发生的蒸气云爆炸及硫化氢扩散的后果进行量化分析,根据超压-冲量准则、热剂量准则和硫化氢扩散行为规律,计算出爆炸波、爆炸火球及硫化氢扩散的危害范围。笔者建立了天然气钻井井口安全距离的计算模型,并提出一种确定安全距离的方法。通过计算给出不同无阻流量、不同硫化氢体积含量的20种条件下的天然气钻井井口安全距离,并应用该模型对某含硫气井井口安全距离进行了计算。实例表明,该方法具备实用性,值得在天然气井选址规划中推广和使用。     

Physical and Temporal Isolation of Mountain Headwater Streams in the Western Mojave Desert,Southern California1

Abstract: Streams draining mountain headwater areas of the western Mojave Desert are commonly physically isolated from downstream hydrologic systems such as springs, playa lakes, wetlands, or larger streams and rivers by stream reaches that are dry much of the time. The physical isolation of surface flow in these streams may be broken for brief periods after rainfall or snowmelt when runoff is sufficient to allow flow along the entire stream reach. Despite the physical isolation of surface flow in these streams, they are an integral part of the hydrologic cycle. Water infiltrated from headwater streams moves through the unsaturated zone to recharge the underlying ground‐water system and eventually discharges to support springs, streamflow, isolated wetlands, or native vegetation. Water movement through thick unsaturated zones may require several hundred years and subsequent movement through the underlying ground‐water systems may require many thousands of years – contributing to the temporal isolation of mountain headwater streams.     

COMPARATIVE EVALUATION OF THREE URBAN RUNOFF MODELS1

ABSTRACT: Three urban runoff models, namely, the Road Research Laboratory Model (RRLM), the Storm Water Management Model (SWMM) and the University of Cincinnati Urban Runoff Model (UCURM), were examined by comparing the model simulated hydrographs with the hydrographs measured on several instrumented urban watersheds. This comparison was done for the hydrograph peak points as well as for the entire hydrographs using such statistical measures as the correlation coefficient, the special correlation coefficient and the integral square error. The results of the study indicated that, when applying the three selected non-calibrated models on small urban catchments, the SWM model performed marginally better than the RRL model and both these models were more accurate than the UCUR model. On larger watersheds, the comparisons between the SWM model and the other two models would be likely even more favourable for the SWM model, because it has the most advanced flow routing scheme among the studied models.     

ACCURACY OF IMPERVIOUS AREA VALUES ESTIMATED USING REMOTELY SENSED DATA1

ABSTRACT: Remote sensing offers an attractive alternative to conventional data collection employed in the estimation of certain hydrologic model parameters. In this investigation, the standard error of parameters estimated from Landsat data are examined. Relationships between the standard error and the size of the spatial-modeling units are developed that allow extending results to larger areas. Based upon the investigations conducted, a generalized model of the error relationships could not be developed.     

THE APPLICATION OF HYDROLOGIC MODELS TO SMALL WATERSHEDS HAVING MILD TOPOGRAPHY1

ABSTRACT: The application of hydrologic models to small watersheds of mild topography is not well documented. This study evaluates the applicability of hydrologic models described by Huggins and the Soil Conservation Service to small watersheds by comparing the simulated and actual hydrograph for both gaged and ungaged situations. The annual maximum rainfall events plus storms exceeding 2.5 inches from 25 years of rainfall and runoff data for two small watersheds were selected for the model evaluations. These storms had a variety of patterns and occurred on many different watershed conditions. Simulated and actual hydrographs were compared using a parameter which contained volume, peak, and shape factors. One-half of the selected storms were used to calibrate the models. For both models, there were no significant differences between the simulated and actual runoff volumes and peak runoff rates. Parameters obtained during the calibration process and relationships developed to estimate antecedent moisture and to modify tabulated runoff curve numbers were used to simulate the runoff hydrograph from the remaining storms. These remaining storms or test storms were simulated only once in order to imitate an ungaged situation. In general, both the Huggins and SCS model performed similarly on the test storms, but the level of model performance was lower than that for the calibration storms. For both models, the two-day antecedent rainfall was more important than the five-day in determining antecedent moisture and modifying tabulated curve numbers. The time of concentration which resulted in good hydrograph simulations was about three times larger than that estimated using published empirical relationships.     

THE EFFECT OF DATA INDEPENDENCE IN MODEL CALIBRATION AND MODEL TESTING1

ABSTRACT: With the increased use of models in hydrologic design, there is an immediate need for a comprehensive comparison of hydrologic models, especially those intended for use at ungaged locations (i.e., where measured data are either not available or inadequate for model calibration). But some past comparisons of hydrologic models have used the same data base for both calibration and testing of the different models or implied that the results of model calibration are indicative of the accuracy at ungaged locations. This practice was examined using both the regression equation approach to peak discharge estimation and a unit hydrograph model that was intended for use in urban areas. The results suggested that the lack of data independence in the calibration and testing of regression equations may lead to both biased results and misleading statements about prediction accuracy. Additionally, although split-sample testing is recognized as desirable, the split-samples should be selected using a systematic-random sampling scheme, rather than random sampling, because random sampling with small samples may lead to a testing sample that is not representative of the population. A systematic-random sampling technique should lead to more valid conclusions about model reliability. For models like a unit hydrograph model, which are more complex and for which calibration is a more involved process, data independence is not as critical because the data fitting error variation is not as dominant as the error variation due to the calibration process and the inability of the model structure to conform with data variability.     

HYDROLOGIC EFFECTS FROM CHANGES IN GROUND WATER PUMPAGE1

ABSTRACT: Simulation of a large stream-aquifer system in Nebraska has been accomplished for the period from 1975 to 2020 to determine effects of controls on ground water pumpage. Three scenarios tested consisted of average annual withdrawals of 15.2 ac-in/ac (FUTURE 1), 14.8 ac-in/ac (FUTURE 2), and 9.8 ac-in/ac (FUTURE 3). The highest quantity represents the historical tendency; while the 14.8 in. figure represents a slight reduction and also represents an equalization of irrigation application efficiencies throughout the area. The lowest figure represents a substantial increase in application efficiency. Comparisons between simulated ground water elevations indicate maximum savings of FUTURE 2 over FUTURE 1 of less than 8 ft. FUTURE 3 ft. FUTURE 3 levels are projected to be a maximum of approximately 13 ft. higher than FUTURE 1's. The relatively small savings from reductions in pumpage result primarily from recirculation effects. Differences between ground water contributions to stream flow are small for all scenarios. These contributions decrease with time and increasing pumpage amounts. Base flow rates at the end of the simulation are approximately 25 percent of those at the beginning.