一种新型生物絮凝剂FM-2絮凝特性及稳定性考察

文章对絮凝剂FM-1的储存稳定性以及絮凝活性分布进行了考察,发现其絮凝活性物质主要分布于上清液之中,加之储存稳定性较差的特点,为絮凝剂FM-2的制备提供了前提。絮凝剂FM-2的最佳絮凝率高达99.21%,其储存时间较长,30 d内其絮凝率可保持在90%以上;而且还具有较好的热稳定性,当加热温度从70℃升高到100℃,其絮凝率均保持在95%以上。     

絮凝剂处理污水的现状及对策研究

随着科学技术的发展,产生了许多新的水处理方法,例如生化法、离子交换法、吸附法等,但絮凝沉降法是目前国内外普遍使用的一种既经济又简便的水质处理方法。随着水污染的增加,高效实用絮凝剂的研制成为关键。目前,在各种废水处理中,絮凝剂起着至关重用的作用。综述了各类絮凝剂的研究进展及其在污水处理方面的应用,探讨了其今后的发展趋势。     

水解淀粉接枝改性阳离子化絮凝剂的制备及其应用

淀粉接枝改性阳离子化絮凝剂对城市污水以及采用絮凝法处理的废水具有良好的处理效果,但是淀粉絮凝剂几乎不溶于水,因此提高淀粉絮凝剂的溶解性,对于提高淀粉絮凝剂的絮凝效果具有重要的意义。本文采用α-淀粉酶对玉米淀粉进行水解,接枝共聚合成淀粉絮凝剂,通过改性最终制备得到水解淀粉接枝改性阳离子化絮凝剂,并通过试验对其合成指标进行了考察以及与普通淀粉絮凝剂的溶解性进行了对比。结果表明:水解淀粉接枝改性阳离子化絮凝剂在具备良好的絮凝效果的同时,其溶解度有了明显的提高。     

微生物絮凝剂的絮凝性及抗氧化性研究

考察了一株产絮凝剂细菌BK-4所产絮凝剂的絮凝能力、组成及抗氧化性.结果表明,接种量2％、培养24 h后BK-4菌发酵液的最大絮凝率可达96.9％.发酵液的主要组成为多糖,提取方法对粗提物的絮凝率有明显影响,水溶醇沉法粗提物的最大絮凝率可达95.6％,粗提物多糖含量为1.65g/L时对DPPH自由基的捕获率可达最大值3...     

活性污泥吸附絮凝中纤板废水的研究

利用实验室培养的活性污泥吸附絮凝预处理中纤板废水中的悬浮物和有机物。研究结果表明,当污泥投加量为6~9 g/L,废水pH值为6,吸附絮凝时间为30 min,沉淀时间为30 min时,处理效果最好,对废水中SS,COD和SCOD的去除率分别为29%,24%和17%左右。该方法为含高悬浮物、高有机物工业废水的预处理开辟了新途径。     

絮凝-SBR-Fenton氧化处理酶制剂废水的研究

以某酶制品厂的废水为研究对象,确定了絮凝-SBR-Fenton高级氧化的试验方法.结果表明,在絮凝阶段,当聚合氯化铝(PAC)投加量为0.6g/L,搅拌6 min,絮凝70min的条件下,预处理的出水CODCr效果最好,去除率为44.6%;再经过SBR工艺处理,停留时间为14 h时,CODCr去除率达到了89.2%;之后再进行Fenton高级氧化,氧化的最佳条件是:ρ(FeSO4·7H2O)为3 g/L,ρ(H2O2)为0.8g/L,反应时间2 h.最终出水达到了GB 8978-1996<污水综合排放标准>中二级排放标准.     

应用加载磁絮凝技术处理垃圾渗滤液试验研究

垃圾渗滤液是一种成分复杂多变的高浓度难处理有机废水。本研究采用加载磁絮凝技术对垃圾渗滤液进行预处理,并讨论了适宜的磁载体、凝聚剂和絮凝剂的加入量。     

磁絮凝处理染整废水的中试研究

针对染整废水进行磁絮凝的中试研究,将磁粉加载于混凝澄清池,该技术是在接触絮凝加速澄清技术基础上提出的一种应用絮凝形态学理论的新型高效固液分离技术。中试试验经过半年的调试和运行,浊度等水质数据明显优于普通的砂滤出水水质。处理后的出水水质为pH=6~9,COD≤200 mg/L,浊度≤10NTU,色度≤200倍。     

Removal of polycyclic aromatic hydrocarbons from aqueous solution by raw and modified plant residue materials as biosorbents

Removal of polycyclic aromatic hydrocarbons （PAHs）, e.g., naphthalene, acenaphthene, phenanthrene and pyrene, from aqueous solution by raw and modified plant residues was investigated to develop low cost biosorbents for organic pollutant abatement. Bamboo wood, pine wood, pine needles and pine bark were selected as plant residues, and acid hydrolysis was used as an easily modification method. The raw and modified biosorbents were characterized by elemental analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorption isotherms of PAHs to raw biosorbents were apparently linear, and were dominated by a partitioning process. In comparison, the isotherms of the hydrolyzed biosorbents displayed nonlinearity, which was controlled by partitioning and the specific interaction mechanism. The sorpfion kinetic curves of PAHs to the raw and modified plant residues fit well with the pseudo second-order kinetics model. The sorption rates were faster for the raw biosorbents than the corresponding hydrolyzed biosorbents, which was attributed to the latter having more condensed domains （i.e., exposed aromatic core）. By the consumption of the amorphous cellulose component under acid hydrolysis, the sorption capability of the hydrolyzed biosorbents was notably enhanced, i.e., 6-18 fold for phenanthrene, 6-8 fold for naphthalene and pyrene and 5-8 fold for acenaphthene. The sorpfion coefficients （Kd） were negatively correlated with the polarity index [（O＋N）/C], and positively correlated with the aromaticity of the biosorbents. For a given biosorbent, a positive linear correlation between logKoc and logKow for different PAHs was observed. Interestingly, the linear plots of logKoc-logKow were parallel for different biosorbents. These observations suggest that the raw and modified plant residues have great potential as biosorbents to remove PAHs from wastewater.     

电絮凝去除废水中多种重金属影响因素研究

目的以铁作为电极,研究电絮凝法处理含多种重金属废水的影响因素及效果。方法通过控制pH、停留时间、电流密度、电导率、废水初始浓度等因素至不同水平,考察处理效果、能耗及极板消耗的变化。结果随着停留时间、pH值及电流密度的升高,处理效果越好,但升高至一定程度后,处理效果提升并不明显;电导率对处理效果影响并不显著,但过低的电导率会增加能耗;废水初始浓度越高,要达到处理目标所需的能耗及极板消耗均越高。结论当pH为8.5~9.0、进水电导率为1500~2000μs/cm、停留时间为3~4 min、废水初始质量浓度20 mg/L、电流密度为13.2~19.8 A/m2时,处理效果最理想,对总铜、总镍、总铅、总锌、总镉及总铬的去除率达到99%以上,且能耗与极板消耗均为最低,电絮凝法更适合于重金属废水的深度处理。