外绝缘用液体硅橡胶老化现象的微观表征

本文针对近年来出现在一些变电站SF6电压、电流互感器的液体硅橡胶绝缘护套出现龟裂老化这一现象,对发生老化的硅橡胶材料进行了性能测试和试验,并利用红外光谱分析、XPS分析、热失重等手段分析了其微观结构和物质组成的变化。研究发现老化后的液体硅橡胶中Si-C、Si-O官能团和Si、C、O元素的相对含量发生了变化,且随着老化程度的增加呈现出较为明显的规律,老化越严重,Si-C键含量越少,C元素的含量越少,O元素含量越多。本文认为,用官能团含量、元素相对含量可以准确地表征液体硅橡胶材料的老化程度。通过对不同老化程度的液体硅橡胶进行的憎水性、耐漏电起痕性能的试验也证实了本文的观点。     

Sedimentology models from activity concentration measurements: application to the “Bay of Cadiz” Natural Park (SW Spain)

A previous study on seabed sediments of the Bay of Cadiz (SW of Spain) enabled us to identify several relations between sedimentological variables and activity concentrations of environmental radionuclides such as ¹³⁷Cs, ²²⁶Ra, ²³²Th and ⁴⁰K. In this paper the study has been extended to a large neighbouring inter-tidal area in order to establish if the above mentioned models can be generalized. As a result we have determined that the measured activity concentrations are closely to the values predicted by the theoretical models (correlation coefficient range = 0.85–0.93).     

Effect of liming on the distribution of heavy metals in untreated industrial sewage sludge produced in Pakistan for the cultivation of <Emphasis Type="Italic">Sorghum bicolor</Emphasis> (L.)

The recycling of sewage sludge on agriculture land represents an alternative, advantageous, disposal of this waste material. The aim of the present study was to evaluate the feasibility of using industrial sewage sludge, produced in Pakistan, as a fertiliser. Agricultural soil amended with 25% (w/w) sewage sludge with or without lime treatment was used for growing a variety of sorghum (PARC-SS-1). The mobility of the heavy metals (HMs) (Cd, Cu, Cr, Ni, Pb and Zn) and metalloid (As) in the untreated industrial waste water sewage sludge (UIWS) samples were assessed by applying a modified BCR (Community Bureau of Reference) sequential extraction procedure. The single extraction procedure comprised of the application of mild extractant (CaCl₂) and water for the estimation of the proportion of easily soluble metal fractions. The precision and accuracy of BCR was evaluated by using a certified reference material of soil amended with sewage sludge BCR 483. The plant available metal contents, as extracted by the deionised water and 0.01 M CaCl₂ solution and exchangeable fraction of BCR sequential, decreased with lime application in the range of 10–44% for As, Cr, Ni, Pb and Zn, except in the cases of Cd and Cu, where their mobility was increased by 10% and 24%, respectively. Sludge amendment enhanced the dry weight yield of sorghum and the increase was more obvious after liming up to 25%. The uptake of HMs were lower in test samples (3.2–21.8%), except for Cu and Cd, which was higher (4%), while they were below the permissible limit of these metals. The present experiment demonstrates that liming was important in factors facilitating the growth of sorghum in sludge-amended soil.     

Methods Currently Used in Testing Microbiological Degradation and Deterioration of a Wide Range of Polymeric Materials with Various Degree of Degradability: A Review

Biodegradation of polymeric materials affect a wide range of industries, information on degradability can provide fundamental information facilitating design and life-time analysis of materials. Among the methods currently used in testing, traditional gravimetric and respirometric techniques are tailored to readily degradable polymeric materials mostly and polymer blends with biodegradable components, but they are not applicable to the new generation of engineering polymers which are relatively resistant to biodegradation. However, electrochemical impedance spectroscopy (EIS) has been tested for monitoring biodeterioration of high strength materials and the technique has very high sensitivity. A wide range of materials including electronic insulation polyimides, fiber-reinforced polymeric composites (FRPCs) and corrosion protective polyurethane coatings have been successfully measured under inoculation of degradative microorganisms using EIS. In addition, the mechanism of degradation of high strength polymers is mainly due to the presence of plasticizers in the polymer matrices. The information on various methods discussed in this review is intended to illustrate a suite of methods for those who are interested in testing biodeterioration of polymeric materials under different environmental conditions and in selecting appropriate techniques for specific applications.     

A Sensitive Electrochemical Impedance Spectroscopy Method for Detection of Polyimide Degradation by Microorganisms

An electrochemical impedance spectroscopy (EIS) technique was evaluated for monitoring microbial degradation of electronic packaging polyimides. The microbial inoculum was a mixed culture of fungi isolated previously from deteriorated polyimides. The active fungal consortium comprised Aspergillus versicolor, Cladosporium cladosporioides, and a Chaetomium species. After inoculation, fungal growth on the polyimides resulted in distinctive EIS spectra indicative of polymer insulation failure, which directly related to polymer integrity. Degradation appeared to occur in a number of steps and two distinctive stages in the decline of film resistance were observed in the inoculated EIS cells within the 2 and 10 weeks after inoculation. The early stage of resistance decrease may be related to the ingress of water molecules and ionic species into the polymeric materials, whereas the second stage probably resulted from partial degradation of the polymers by fungal growth on the polymer film. The relationship between changes of impedance spectra and microbial degradation of the polymer was further supported by scanning electron microscopy (SEM) observations of fungi growing on the surface of the inoculated polyimides. Our data indicate that the EIS can be used in detection of early degradation of resistant polymers and polyimides that are susceptible to biodeterioration.     

花生壳活性炭对反渗透(RO)浓水的吸附特性

以花生壳活性炭对RO浓水进行吸附处理,利用傅立叶红外光谱(FTIR)和荧光光谱(EEM)研究花生壳活性炭对不同pH的RO浓水的吸附特性.结果表明,花生壳活性炭对溶解性有机碳(DOC)的吸附遵循准二级吸附动力学方程,特别是碱性条件下,DOC的吸附量随着pH的升高而降低.而且pH越高,达到吸附平衡的时间越长.通过FTIR光谱分析发现,活性炭的芳香结构吸收峰在吸附后红移至1630 cm-1,表明被吸附的有机物在该处有明显的特征吸收峰,而C—O和O—H官能团的吸收峰则因为钙离子等物质的吸附而显著降低.由EEM光谱分析可知,RO浓水的荧光物质主要由腐殖酸类腐殖质和富里酸类腐殖质组成,其荧光强度与DOC之间具有较好的线性相关性.     

IWO-PSO-SVR算法在甲烷检测中的应用

提出一种入侵杂草算法改进的粒子群算法(IWO-PSO)用于支持向量机(SVR)算法来快速实时检测甲烷气体浓度系统,气体红外激光差分吸收法检测系统基于甲烷气体分子在1650nm处泛频光谱吸收带,结合可调谐二极管吸收光谱(TDLAS)与波长调制光谱(WMS).选择半导体激光器瞬时输出光功率变化范围5.0¹0.6mW,瞬时波长变化范围1650¹651nm,瞬时调谐频率范围0.0048⁰.0115nm/mA;采集山东淄博某农场2019年3月份全天气体样本,随机抽取15组样本作为训练集,建立以光谱峰面积作为输入值与气体浓度作为输出值的IWO-PSO-SVR、SVR、PSO-SVR和PSO-BP定量分析模型,对测试集4种浓度的甲烷分别进行预测;结果表明,通过IWO-PSO-SVR定量分析模型效果最佳,4种甲烷浓度预测值与真实值相对偏差分别为0.115%、0.109%、0.131%、0.120%,均低于0.0014;相关系数分别为0.9987、0.9966、0.9899、0.9975均高于0.98;预测时间分别为1.35、1.54、1...     

Uranium isotopes in Tunisian bottled mineral waters

²³⁴U and ²³⁸U activity concentrations and their relative effective doses have been determined in 10 bottled mineral waters in Tunisia. Alpha spectrometry was used as technique to measure uranium isotopes. The obtained isotopic ratio ²³⁴U/²³⁸U varies between 1.1 and 3 which means that the two isotopes are not in radioactive equilibrium. Measured activity concentration varies between 3.2 and 40 mBq/l for ²³⁴U and between 1.5 and 26.3 mBq/l for ²³⁸U. Effective doses (assuming 2 litres per day of water consumption) coming from this two isotopes are found to vary between 0.16 and 2.02 μSv/a which is lower than the maximum recommended dose level by the WHO.     

有机负荷对醋糟厌氧消化系统启动的影响

本研究通过醋糟的中温产甲烷潜力测试实验,考察了有机负荷对醋糟厌氧消化反应器启动的影响.并通过对不同有机负荷条件下的甲烷产量、液相组分的对比分析,结合热重、X射线衍射和红外光谱学方法进行差异表征,结果发现:1较低的有机负荷有利于缓解醋糟中有机物水解酸化过程中VFAs的积累和pH的下降,保证产甲烷过程的稳定进行.当接种物与基质VS比为1∶1[即有机负荷(以VS计)为1.78 g·(L·d)~(-1),pH=7.60]时的累积甲烷产量最高,达2 249.7 m L.随着有机负荷的提高,VFAs的累积浓度随之升高,使产甲烷过程受到不同程度的抑制并相继终止,且在接种物与基质VS比为1∶4时[即有机负荷为7.12 g·(L·d)~(-1),pH=5.52]实现了乙酸和乳酸的同步发酵(分别可达到8 000 mg·L~(-1)和2 650 mg·L~(-1)).2醋糟中木质纤维素类物质为短程有序的微晶结构或非晶结构,与富含纤维素类晶体结构物质的玉米秸秆等相比,其VS的降解率更高.醋糟中的木质素、纤维素、半纤维素的降解率随着有机负荷的降低而逐渐升高.     

基于甲烷氧化菌的城镇污水厂尾水极限脱氮系统构建及机制

好氧甲烷耦合反硝化(AME-D)在城镇污水厂尾水深度脱氮方面具有巨大的应用潜力,研究采用改良型反硝化生物滤池,利用低浓度甲烷构建出AME-D极限脱氮系统.研究发现该系统在间歇式运行方式下,出水中总氮和氨氮的平均浓度能达到1.05 mg·L^-1和0.54 mg·L^-1,其平均去除率分别为94.77%和93.30%.拉曼光谱分析结果显示,由NO^-₃对称伸缩引起的峰明显消失,由醇COH面外弯曲或C—H面外弯曲振动吸收引起峰明显增强,甲烷被氧化形成的中间产物可能主要为醇类物质. 16S rRNA基因测序结果表明,系统中的甲烷氧化菌主要为Methylocystis(0.27%)、Methylosarcina(0.10%)和Methyloparacoccus(0.12%),反硝化菌主要为Pseudomonas(56.92%)、Paenibacillus(3.52%)和Lysinibacillus(3.00%),硝化菌主要为Nitrospira(0.1%),说明AME-D极限脱氮系统的脱氮功能是由好氧甲烷氧化菌、...