EGSB出水回流对EGSB—SBR工艺处理果汁废水的影响

采用EGSB—SBR工艺处理实际果汁废水(COD 2 608~6 500 mg/L,p H 5.0~7.0)。在EGSB反应器成功启动及驯化完成的情况下,连续运行49 d。实验结果表明:第25天起,控制EGSB回流比为3.00∶1,EGSB反应器可在无须添加Na HCO3的条件下稳定运行,从而降低了废水处理成本;第25天起,平均进水COD,BOD5,SS分别为5 968,2 130,1 020 mg/L,平均出水COD,BOD5,SS分别降至131,11,50 mg/L,平均COD,BOD5,SS去除率分别为98%,99%,95%;组合工艺对该实际果汁废水具有良好的处理效果。     

矿山企业清洁生产审核实践及研究

结合清洁生产审核的政策和工作原理,将北京某铁矿公司的生产指标与国家采选行业清洁生产标准进行对比,确定审核目标,通过加权法从技术、环境、经济方面分析比较得出审核方案和审核结论. 对该企业实施清洁生产审核工作所取得的经验和存在问题进行总结和分析,不仅为矿山企业今后的清洁生产审核积累了丰富的实践经验,而且对我国当前正在开展的循环经济试点工作起到了很好的借鉴和推动作用.     

Flotability and flotation separation of polymer materials modulated by wetting agents

The surface free energy, surface tension and contact angles were performed to investigate the properties of wetting agents. Adsorption of wetting agents changes wetting behavior of polymer resins. Flotability of polymer materials modulated by wetting agents was studied, and wetting agents change significantly flotability of polymer materials. The flotability decreases with increasing the concentration of wetting agents, and the wetting ability is lignin sulfonate (LS) > tannic acid (TA) > methylcellulose (MC) > triton X-100 (TX-100) (from strong to weak). There is significant difference in the flotability between polymer resins and plastics due to the presence of additives in the plastics. Flotation separation of two-component and multicomponent plastics was conducted based on the flotability modulated by wetting agents. The two-component mixtures can be efficiently separated using proper wetting agent through simple flotation flowsheet. The multicomponent plastic mixtures can be separated efficiently through multi-stage flotation using TA and LS as wetting agents, and the purity of separated component was above 94%, and the recovery was more than 93%.     

浅析报废汽车拆解厂废水循环处理技术的应用现状

报废汽车的回收拆解处理在我国已经逐渐兴起，但由于该产业尚处于发展初期，环保技术手段和可持续性发展意识还不够，因此在回收拆解过程中会产生大量的废水和其他污液。针对某汽车回收拆解厂的废水特性进行实验研究，形成“电荷凝集过滤一活性炭吸附”组合工艺，对报废汽车回收拆解企业的废水处理提供了一定的参考价值。     

THE W-INDEX FOR RESIDENTIAL WATER CONSERVATION1

ABSTRACT: An index of residential water efficiency - a “W-Index” - can serve as a measure of effectiveness of water conservation features in the home. The index provides a calculated numerical value for each dwelling unit, derived from the number and kind of water-saving features present, including indoor and outdoor water savers and water harvesting or recycling systems. A W-Index worksheet, devised for on-site evaluation of single-family residences in the Tucson, Arizona, region shows that a nonconserving residence with all the water-using features would use 151,000 gallons per year or 148 gallons per capita per day (gpcpd), while the fully conserving model would use 35,300 gallons per year or 35 gpcpd and with water harvesting and graywater recycling systems would have a maximum W-Index of W-160. A Tucson water conservation demonstration home, Casa del Agua, received a rating of W-139, and field tests of about 30 homes in new Tucson subdivisions show values ranging from W-75 to W-100, indicating the incorporation of some water conservation in current new models. By adjustment of some climatic or water-use parameters, the W-Index format can be applied to various types of dwelling units or to other urban areas. The W-Index can be used by individual homeowners or builders to evaluate water efficiency of residential units, or by water providers or water management agencies as a device for promoting and achieving water conservation goals.     

利用煮茧废水培养钝顶螺旋藻的初步研究

本文对缫丝厂煮茧废水和Ｚａｒｒｒｏｕｋ培养基的主要营养成份进行了分析比较，筛选出了适合钝顶螺旋藻（Ｓｐｉｒｕｌｉｎａｐｌａｔｅｎｓｉｓ）在煮茧废水中生长繁殖的培养基和与之相适应的驯化藻种。经室外１５０升煮茧废水扩大培养，干藻生物量可达１６．０３克／米￣２·天，粗蛋白含量达５８．６％，含有１７种氨基酸。比用Ｚａｒｒｏｕｋ培养基培养的螺旋藻产量提高１５．７８％，成本减少８０％以上。培养后的煮茧废水ＣＯＤ和ＢＯＤ＿５浓度低于我国污水综合排放标准。研究结果表明：采用本实验室筛选的煮茧废水培养基和驯化藻种，在煮茧废水中大量培养螺旋藻，实现废水资源化是可行的，具有明显的经济效益和环境效益。     

Wastewater reuse in Muslim countries: An Islamic perspective

Recycling wastewater seems to have become a highly useful technique for meeting the shortage of fresh water in all parts of the world. It seems all the more important for Muslim countries because a large number of these countries face acute fresh water shortage. This paper views the problem from an Islamic viewpoint, that is, in the light of the Qur'n, theSunnah, andFiqh works.In Islamic law, water is classified into three categories oftahr,thir, andmutanajjis. The last two categories can be transmuted intotahr water and thus may be used for all mundane as well as religious purposes if they are assimilated into the overall supply oftahr water. This would be lawful from the Islamic viewpoint even without treating the water. To make use of modern technology in order to recycle wastewater effluents after treatment seems quite in keeping with the spirit and letter of the Islamic teachings.     

Catalytic decomposition of hydrocarbon into hydrogen and carbon in a spouted-bed reactor as the second-stage reactor of a plastic recycling process

A two-stage process for the chemical recycling of plastics is proposed. In this process, which consists of two reactors, plastics are converted into hydrogen and carbon. In the first reactor, plastic chips are thermally decomposed into hydrocarbons. In the second reactor, the hydrocarbons formed in the first reactor are catalytically decomposed into carbon and hydrogen. In this study, in order to obtain basic data for the second reactor, propene was catalytically decomposed in a laboratory-scale spouted-bed reactor (600mm high, 21.6mm internal diameter, made of SUS304). The effect of the type of spouting medium used on the decomposition behavior of propene was investigated using four types of spouting medium (nickel-plated -alumina, palladium-plated -alumina, nickel-impregnated -alumina, and -alumina). The nickel-impregnated -alumina gave the best propene conversion and hydrogen yield.     

浙江省废纸再生产业的经验、问题及对策

文章分析了浙江省在废纸再生方面的3个典型模式的经验，指出了存在的问题并提出了建议对策。     

Technological improvements in automotive battery recycling

Recycling of automotive batteries for the recovery of secondary lead is extremely important in Brazil, for the country does not possess large reserves of this metal. Lead is one of the most widely used metals in the world, but it is highly toxic, posing risks for humans and for the environment if not utilized or treated adequately. Industrial waste containing lead in Brazil are classified by the Brazilian Residue Code (NBR—10004:2004) as hazardous. The lead recycling process employed by the recycling industry in Brazil is the pyrometallurgical process in a rotary furnace. This process consists of four stages: (1) grinding of the battery to separate plastic, electrolyte and lead plates; (2) lead reduction in a rotary furnace; (3) separation of metallic lead from slag; and (4) refining of recycled lead. The purpose of this work is to propose process improvements aimed primarily at increasing production output by reducing the loss of lead in slag and particulates, thereby providing a healthier work environment in line with Brazilian environmental and labor laws.