Influence of the oxide content on the ignition energies of aluminium powders

Some results of determination of ignition energies for an aluminium powder with various oxide contents are presented. Common use of processes like high-speed cutting produce explosive dust clouds, so that we focused this study on hazard of metallic powders. An industrial aluminium powder has been used for this work. An original process, based on the principle of electrochemical anodisation, has been developed to increase, under control, the oxide coating of particles.

The sensitivity study to spark ignition was performed in an Hartmann explosion tube of 1.3L. The Langlie test method was applied to evaluate the energies leading to a probability of ignition of 50% (E₅₀) of the selected samples. The results confirm that the ignition energies increase with the oxide content of the powder.     

AN OPTIMIZATION MODEL FOR EFFICIENT MANAGEMENT OF URBAN WATER RESOURCES1

ABSTRACT: A mathematical programming model is proposed to determine economically efficient urban water resource allocation and pricing policy by maximizing the sum of the consumer and producer surplus. The optimization of this nonlinear problem is accomplished by the use of linear programming algorithm. The feasibility of using recycled water for municipal purposes is examined in a planning context. The impact of higher water quality discharge standards on pricing and allocation of water is analyzed and the attractiveness of water reuse option is demonstrated.     

The long and winding road to resource efficiency – An interdisciplinary perspective on extended producer responsibility

Extended producer responsibility is advocated for its capacity to spur resource efficiency through green innovation and closing loops downstream of consumption. Its rationale is the extension of the polluter-pays principle to the post-consumption phase. This paper analyze the underlying mechanisms that are supposed to work under the EPR approach, and proposes an alternative view. The main purpose of EPR is seen as the creation of the bases for legitimizing the involvement if industry taking over the task of diverting waste from landfill. Its success rests on the superior managerial capacity of industry and the need to organize post-consumption markets that transcend the local scale and have access to the economies of scale and scope. The emphasis on producers does not add anything special, but may reinforce the bases for legitimizing the implicit delegation of power to industry. Primary and above all, we have witnessed in the last 20 years a gigantic effort of market design, and this is the main demonstration of EPR's success.     

Assessment of plastic packaging waste: Material origin,methods, properties

The global plastics production has increased annually and a substantial part is used for packaging (in Europe 39%). Most plastic packages are discarded after a relatively short service life and the resulting plastic packaging waste is subsequently landfilled, incinerated or recycled. Laws of several European and Asian countries require that plastic packaging waste collected from households has to be sorted, reprocessed, compounded and reused. These recycling schemes typically produce milled goods of poly(ethylene terephthalate) (PET), poly(ethylene) (PE), isotactic poly(propylene) (PP), mixed plastics, and agglomerates from film material. The present study documents the composition and properties of post-consumer polyolefin recyclates originating from both source separation and mechanical recovery from municipal solid refuse waste (MSRW). The overall composition by Fourier transform-infrared (FT-IR) spectroscopy and differential scanning calorimetry (DSC) were determined and compared with the sorting results of the sorted fractions prior to the reprocessing into milled goods. This study shows that the collection method for the plastic packaging waste has hardly any influence on the final quality of the recyclate; however, the sorting and reprocessing steps influence the final quality of the recyclate. Although the mechanical properties of recyclate are clearly different than those of virgin polymers, changes to the sorting and reprocessing steps can improve the quality.     

Mechanical recycling of EOL concrete into high-grade aggregates

Recycling End of Life (EOL) concrete into high-grade aggregate for new concrete is a challenging prospect for the building sector because of the competing constraints of low recycling process cost and high aggregate product quality. A further complicating factor is that, from the perspective of the environment, there is a strong societal drive to reduce bulk transport of building materials in urban environments, and to apply more in situ recycling technologies for Construction & Demolition Waste. The European C2CA project investigates a combination of smart demolition, grinding of the crushed concrete in an autogenous mill to increase the liberation of cement mortar from the surface of aggregates and a novel dry classification technology called ADR to remove the fines. The feasibility of this recycling process was examined in a demonstration project involving 20,000 tons of EOL concrete from two office towers in Groningen, the Netherlands. Results show that the +4 mm recycled aggregate compares favorably with natural aggregate in terms of workability and the compressive strength of the new concrete, showing 30% higher strength after 7 days.     

100% recycled hot mix asphalt: A review and analysis

A holistic evaluation of the feasibility of producing 100% recycled mixtures is presented. Eleven technologies readily available for producing 100% Reclaimed Asphalt Pavement (RAP) hot asphalt mixtures are described in the article and the complementary video (http://youtu.be/coj-e5mhHEQ). The recorded performance of 100% RAP mixtures is analyzed along with identification of typical high RAP distresses. Recommended mix design procedures and the best RAP management strategies are described. A cradle-to-gate analysis of environmental effects indicated 18 kg or 35% CO₂eq savings per t of produced 100% RAP asphalt mixture compared to virgin mix, while cost analysis showed at least 50% savings in material related expenses.     

应急修复耦合资源回收的实践-以一起化工企业突发环境事件为例

通过东莞市一起铜氨蚀刻液泄漏引致突发环境事件的应急处理过程,介绍了污染控制和应急修复技术的应用情况,通过将高浓含氨污水蒸发制取NH4Cl产品,以及将污水处理至优于《地表水环境质量标准》（GB3838-2002）之Ⅰ类水质要求,作为我国首例应急修复耦合资源回收制取化工产品的成功案例,为化工类企业突发环境事件的应急处理提供决策参考.     

钼冶炼工艺的循环经济探讨

钼是重要的稀有金属之一,主要通过氧化分解辉钼矿来提取。我国普遍使用反射炉、回转窑等焙烧设备生产氧化钼,造成了严重的SO2污染和资源浪费问题。为改变辉钼矿焙烧分解工艺的污染状况,硝酸高压分解、碱性高压氧分解、次氯酸钠分解和电氧化分解等辉钼矿湿法工艺相继被开发出来。但是这工艺往往只关注在如何获取金属钼等资源,而忽视了辉钼矿中占40%的硫资源。从循环经济角度分析了不同辉钼矿分解工艺的物质流向,探讨符合清洁生产和循环经济精神的工艺革新方向,提出了纯氧氧化焙烧和浓硫酸氧化两种新工艺。     

集成膜法水处理工艺的研究与应用

集成膜法除盐系统具有连续产水、出水质量好、易控制、占地少、不需酸碱、利于环保等优点。文章通过对集成膜法水处理技术进行研究与应用,将原有的化学除盐水处理方式改为集成膜法水处理工艺,该方法产水水质高且水质稳定,每年可节约酸碱200 t,阴、阳离子交换树脂10 t,切实解决电厂所面临的产水水质不稳定、酸碱废液排放等问题,有力推动了清洁生产。     

Operating condition influences on PCDD/Fs emissions from sinter pot tests with hot flue gas recycling

This study was designed to clarify the influence of operating conditions on the formation and emissions of polychlorinated-pdibenzodioxins and dibenzofurans (PCDD/Fs) from a sintering process with hot flue gas recycling. A pilot scale sinter pot with simulated flue gas recycling was developed, and four key operational parameters, including temperature, oxygen content of the simulated waste flue gas, the coke rate of the sintering mixture, and the quicklime quality, were selected for exploring PCDD/Fs formation. The results showed that the temperature of the recycled flue gas had a major affect on PCDD/Fs formation, and a high temperature could significantly increase their formation during sintering. A clear linear correlation between the temperature of recycling flue gas and PCDD/Fs emission (r = 0.93) was found. PCDD/Fs could be reduced to a certain extent by decreasing the level of oxygen in the recycled flue gas, while sintering quality was unchanged. The coke rate had no significant influence on the formation of PCDD/Fs, but the quality of quicklime used in the sintering mixture could affect not only the amount of PCDD/Fs emissions but also the sintering productivity. Compared with a benchmark sinter pot test, PCDD/Fs emissions markedly decreased with improvements to quicklime quality. However, the reduction in PCDD/Fs emissions realized by using high-quality quicklime was limited by the temperature of the inlet gas. The highest reduction achieved was 51% compared with conventional quicklime when the temperature of the inlet gas was 150°C.